Mazda oxygen sensor

    Jan. 26, 2015
    This bulletin applies to 2007-2009 Mazda CX-7 and Mazdaspeed3 and 2006-2007 Mazdaspeed6 models. Some vehicles may experience a hesitation or surge when accelerating after engine warm-up. The symptoms may be noticed before the MIL illumination, with DTC P0134, P2096, P2097, P2177, P2187, P2188, P2195 or P2237 is stored in memory. This may be caused by a front O2 sensor signal failure due to a crack on the primary or secondary O2 sensor cells.
    65b849530e36b1001e817977 Mazdaoxygensensor

    This bulletin applies to 2007-2009 Mazda CX-7 and Mazdaspeed3 and 2006-2007 Mazdaspeed6 models. Some vehicles may experience a hesitation or surge when accelerating after engine warm-up. The symptoms may be noticed before the MIL illumination, with DTC P0134, P2096, P2097, P2177, P2187, P2188, P2195 or P2237 is stored in memory. This may be caused by a front O2 sensor signal failure due to a crack on the primary or secondary O2 sensor cells.

    1. Verify the concern.

    2. Disconnect the O2 sensor connector.

    3. Test drive to verify that the symptom disappears.

    4. If the symptom disappears, replace the front O2 sensor with a modified part according to workshop manual section 01-40 HEATED OXYGEN SENSOR (HO2) REMOVAL/INSTALLATION [L3 WITH TC].

    P/N                             ITEM                             APPLICABLE MODEL

    L33L-18-8G1E-9U…..Front O2 sensor………….CX-7

    L33X-18-8G1C………Front O2 sensor………….Mazdaspeed3

    L3M6-18-8G1F………Front O2 sensor………….Mazdaspeed6

    Continue Reading

    Sponsored Recommendations

    Learn how electronic parking brake actuators have replaced manual systems and now play a key role in advanced safety features like automatic emergency braking. This WIYB Training...
    Not all fuel injectors are created equal. In this WIYB Training Series, we compare Standard® Fuel Injectors against OE, low-cost imports. See why precision engineering and rigorous...
    Carrying active OEM subscriptions for all manufacturers is not possible for many shops. However, access to this software is required for certain modern vehicles and repairs, and...
    Enhance your collision repair workflow with Autel’s IA900, a process-driven solution integrating precision alignment, bi-directional diagnostics, and ADAS calibration. Designed...

    Voice Your Opinion!

    To join the conversation, and become an exclusive member of Vehicle Service Pros, create an account today!