Some 2006-2009 Mercury Mariner Hybrid vehicles may exhibit a leak from the power transfer unit (PTU) vent tube bolt. This may be misdiagnosed as a PTU link shaft seal leak.
Some 2006-2009 Mercury Mariner Hybrid vehicles may exhibit a leak from the power transfer unit (PTU) vent tube bolt. This may be misdiagnosed as a PTU link shaft seal leak.
Verify and tighten the PTU vent tube bolt before replacing parts. Remove the PTU fill plug and check fluid level per workshop manual section 308-07B. The fluid level must be even with the bottom of the filler hole with the vehicle on a flat surface.
If the PTU vent tube bolt is leaking, clean bolt contact surfaces and torque the bolt to 120 in.-lbs. If the PTU vent tube bolt is not leaking, continue with normal diagnosis. NOTE: The vent tube bolt does not require a washer.
Learn how electronic parking brake actuators have replaced manual systems and now play a key role in advanced safety features like automatic emergency braking. This WIYB Training...
Not all fuel injectors are created equal. In this WIYB Training Series, we compare Standard® Fuel Injectors against OE, low-cost imports. See why precision engineering and rigorous...
Carrying active OEM subscriptions for all manufacturers is not possible for many shops. However, access to this software is required for certain modern vehicles and repairs, and...
Learn how to properly lubricate your AIRCAT air tools to keep them running at peak performance. Discover essential daily maintenance and storage techniques, along with the right...
Voice Your Opinion!
To join the conversation, and become an exclusive member of Vehicle Service Pros, create an account today!
