If the trailing edge of the hood on a 2009-2010 Acura TSX vibrates or flutters on rough roads or at highway speed, the probable cause is insufficient support at the rear hood seal on the cowl cover.
If the trailing edge of the hood on a 2009-2010 Acura TSX vibrates or flutters on rough roads or at highway speed, the probable cause is insufficient support at the rear hood seal on the cowl cover.
Replace the rear hood seal with Acura seal P/N 74143-TL0-305.
Peel the original seal off. Install the new seal and firmly press the seal into place on its engagement rib.
Learn how electronic parking brake actuators have replaced manual systems and now play a key role in advanced safety features like automatic emergency braking. This WIYB Training...
Not all fuel injectors are created equal. In this WIYB Training Series, we compare Standard® Fuel Injectors against OE, low-cost imports. See why precision engineering and rigorous...
Carrying active OEM subscriptions for all manufacturers is not possible for many shops. However, access to this software is required for certain modern vehicles and repairs, and...
Learn how to properly lubricate your AIRCAT air tools to keep them running at peak performance. Discover essential daily maintenance and storage techniques, along with the right...
Voice Your Opinion!
To join the conversation, and become an exclusive member of Vehicle Service Pros, create an account today!