2010-2011 Audi models may exhibit a high frequency (whistling) wind noise at highway speed, caused by air flowing through the exterior rear view mirror at the seam where the turn signal lamp meets the housing. This affects 2010 A3, A4/S4A5/S5, 2011 A3, A4/S4 A4/S4, A5/S5 and A5 Cabriolet models.
2010-2011 Audi models may exhibit a high frequency (whistling) wind noise at highway speed, caused by air flowing through the exterior rear view mirror at the seam where the turn signal lamp meets the housing. This affects 2010 A3, A4/S4A5/S5, 2011 A3, A4/S4 A4/S4, A5/S5 and A5 Cabriolet models.
The fix involves the simple addition of a sealing strip in the mirror housing. Perform the strip installation to both mirrors, even if the source of the noise is diagnosed as coming from only one mirror.
Remove the cap of the exterior mirror housing. Attach a strip of sealing foam tape in the area shown in Figure 3. The strip will be the correct length to extend from the corner of the lip to the angle in the body line. No modification of the strip should be necessary.
Learn how electronic parking brake actuators have replaced manual systems and now play a key role in advanced safety features like automatic emergency braking. This WIYB Training...
Not all fuel injectors are created equal. In this WIYB Training Series, we compare Standard® Fuel Injectors against OE, low-cost imports. See why precision engineering and rigorous...
Carrying active OEM subscriptions for all manufacturers is not possible for many shops. However, access to this software is required for certain modern vehicles and repairs, and...
Enhance your collision repair workflow with Autel’s IA900, a process-driven solution integrating precision alignment, bi-directional diagnostics, and ADAS calibration. Designed...
Voice Your Opinion!
To join the conversation, and become an exclusive member of Vehicle Service Pros, create an account today!