This bulletin applies to 2010-2011 Lexus GX460 equipped with the A760F transmission; and 2008-2011 LX570 equipped with the AB60F transmission.
This bulletin applies to 2010-2011 Lexus GX460 equipped with the A760F transmission; and 2008-2011 LX570 equipped with the AB60F transmission.
When checking the transmission fluid level, be sure to install a retaining pin in the thermostat cap. This will open the cooling loop and allow for accurate transmission fluid level measurement. Failure to perform this step will result in incorrect transmission fluid level and may cause shifting issues. Push the shaft down with a screwdriver by 5.5 – 7.0 mm, until the screwdriver contacts the step inside the cap, and insert a pin fully through the side hole. Remember to remove the retaining pin after checking fluid level.
Learn how electronic parking brake actuators have replaced manual systems and now play a key role in advanced safety features like automatic emergency braking. This WIYB Training...
Not all fuel injectors are created equal. In this WIYB Training Series, we compare Standard® Fuel Injectors against OE, low-cost imports. See why precision engineering and rigorous...
Carrying active OEM subscriptions for all manufacturers is not possible for many shops. However, access to this software is required for certain modern vehicles and repairs, and...
Learn how to properly lubricate your AIRCAT air tools to keep them running at peak performance. Discover essential daily maintenance and storage techniques, along with the right...
Voice Your Opinion!
To join the conversation, and become an exclusive member of Vehicle Service Pros, create an account today!
