Hazards due to diesel fumes are still insufficiently prevented

Nov. 13, 2017
Diesel engines contribute to a great deal of pollution in garages and similar workplaces. Are you taking the proper precautions to keep workers safe?

In workplaces such as garages, bus depots, ferries and warehouses there is a lot of pollution, caused by diesel engines in vehicles. The engines produce toxic gases and particulates that can cause serious health risks and legal liability. Although it is well known that these diesel fumes are toxic and that protective measures should be taken, that isn’t always done.

A recent publication in the English newspaper The Guardian underlines that boldly, heading “UK legal claims grow over exposure at work to toxic diesel fumes”.

“Same as asbestos in the 1930s”

The article appeared in response to an accusation of an employee of the Royal Mail. The employee worked at a major depot where he says he was exposed daily to diesel exhaust pollution for eight hours per shift. He says the exposure led him to develop asthma, and he provides medical evidence to support his claim.

The legal claim is no incident, according to Dan Shears, Health and Safety Director for the GMB union. He says: “We strongly believe it is a major problem. There are potentially lots of people who have unnecessarily suffered premature death, who may have been affected by industrial exposure. We are now with diesel in the same place we were with asbestos in the 1930s.” Also Unite, Britain’s largest trade union, stated that exposure to diesel fumes is a ticking time bomb.

What are diesel fumes?

Diesel engine exhaust emissions (commonly known as ‘diesel fumes’) are a mixture of gases, vapours, liquid aerosols and substances made up of particles. They contain the products of combustion including: carbon (soot), nitrogen, water, cabon monoxide, aldehydes, oxides of nitrogen, oxides of sulphur and polycyclic aromatic hydrocarbons.

The quantity and composition of diesel fumes in your workplace may vary depending on: the quality of diesel fuels used, the type of engine (standard, turbo or injector), the state of engine tuning, fuel pump setting, the workload demand on the engine, engine temperature and whether the engine has been regularly maintained. 

Health risks

In addition to the control measures described, an employer should also ensure that any engineering controls used are properly maintained and checked regularly. Where necessary, employers should also monitor the exposure to diesel fumes and provide employees with the necessary information on the risk of exposure to these fume and provide instruction and training on the safe use of the control measures, as well as any personal protective equipment that they are using.

Breathing in diesel fumes can affect your health and exposure to the fumes can cause irritation of your eyes or respiratory tract. These effects are generally short term and should disappear when you are away from the source of exposure. However, prolonged exposure to diesel fumes, in particular to any blue or black smoke, could lead to coughing, chestiness and breathlessness. There is some evidence that repeated exposure to diesel fumes over a period of about 20 years may increase the risk of lung cancer. Exposure to petrol engine exhaust emissions does not have the same risk.

Measure to take

To prevent hazards, an employer should take measures. All kinds of health and safety authorities all over the world set up guidelines about how to protect people working in areas full of diesel fumes. For instance, the British HSE (Health and Safety Executive) strongly advises a combination of specific control measures, such as incorporating workplace air extraction fans, tailpipe exhaust extraction systems, the use of filters attached to tailpipes and catalytic converters. 

The carbon particle or soot content varies from 60% to 80% depending on the fuel used and the type of engine. Most of the contaminants are adsorbed onto the soot. Petrol engines produce more carbon monoxide but much less soot than diesel engines. 

Information provided by: Plymovent (www.plymovent.com) 

Sponsored Recommendations

ADAS Case Study: From 10 Calibrations a Month to Over 10 A Day

Originally published by Vehicle Service Pros, March 26, 2024

Snap-on Training: Approach to Intermittent Problems

Snap-on's live training sessions can help you develop your own strategy for approaching vehicle repair.

Snap-on Training: ADAS Level 2 - Component Testing

The second video for Snap-on's comprehensive overview of Advanced Driver Assistance Systems (ADAS), covering the fundamental concepts and functionalities essential for automotive...

Snap-on Training: Intro to ADAS

Snap-on's training video provides a comprehensive overview of Advanced Driver Assistance Systems (ADAS), covering the fundamental concepts and functionalities essential for automotive...

Voice Your Opinion!

To join the conversation, and become an exclusive member of Vehicle Service Pros, create an account today!