K-Tool International introduces three new heavy weight jacks

July 13, 2017
The new jacks include: 1.5-ton racing jack, extra-long 2-ton low profile service jack, and 2.5 ton SUV jack.

K-Tool International is introducing three new jacks: 1.5-ton double-piston aluminum racing jack (No. KTI-63094), an extra-long 2-ton low profile service jack (No. KTI-63095) with high lift range, and 2.5 ton SUV jack (No. KTI-63095) with speed lift technology. 

The aluminum racing jack comes with a two year warranty, while the 2 ton service jack and the 2.5 ton SUV jack carry a one year warranty for each.  In addition to these durable jacks, KTI now offers 2 ton jack stands sold in pairs (KTI61201).  These jack stands are a mere 11 pounds, but can hold nearly 4,400 lbs from base height of 10.75” to a maximum height of 16.73” with ease. 

Full descriptions for each product are included below.

KTI63094 1.5 Ton Aluminum Racing Jack

Features and benefits:

  • 1.5 Ton (3300 lbs) aluminum double-piston hydraulic floor jack raises the vehicle; seven strokes without load
  • High lift range: 3-5/8" - 14-1/4"; Handle length: 37-2/5"; Saddle diameter: 3-4/5"
  • Extra-long, low profile design for low clearance vehicles
  • Swivel saddle and swivel rear casters for positioning and safety.
  • Front wheels diameter 1-3/5" by 4-2/5" wide; Rear casters diameter 1-3/5" by 3/5" wide
  • Color: Red
  • Overall length: 19-5/8”; Width: 10”; Height: 8”; Weight: 31 lbs
  • Covered by a two-year warranty

KTI63095 2 Ton Service Jack Low Profile

 Features and benefits:

  • High lift range:  Low height: 3.35"; Raised height: 14.96"; Handle length: 5.43"
  • Overall length: 22.24"; Over width: 8.31"; Weight: 33.5 lbs.
  • Extra-long, low profile design for low clearance vehicles
  • Swivel saddle and swivel rear casters for  positioning and safety
  • Saddle diameter: 1.8"; Front wheel size: 2.6"; Rear caster wheel size: 1.6"
  • Color: Red
  • Covered by a one-year warranty

KTI63096 2.5 Ton SUV Jack

Features and benefits:

  • Designed for sport utility and trucks
  • Swivel saddle and swivel rear casters for positioning and safety
  • Speed  technology
  • High lift range: low height: 6.1"; raised height: 21.65"; handle length: 10.12"; Saddle diameter: 2.2"
  • Overall length: 24.84"; Overall width: 6.3"; Weight: 44.75 lbs.
  • Front wheel size: 3.5"; Rear caster wheel size: 2.1"
  • Color: Red
  • Covered by a one-year warranty

KTI61201 - Jack Stands 2 Ton (Pair)

Features and benefits:

  • Minimum height: 10.75"; Maximum height: 16.73"
  • Base dimension: 6.89" by 6.57"
  • Weight: 11 lbs. (Pair)
  • Color: Red
  • Covered by a one-year warranty

Sponsored Recommendations

Variable Valve Timing (VVT) Training Series

Almost every new vehicle is equipped with VVT technology. This video explains the weak points in OE designs and gives you a complete overview of the replacement options available...

Cam & Crank Sensor Training Series

Today's advanced engines depend on accurate and consistent information from cam and crank sensors for performance, fuel economy and emissions, and not all cam and crank sensors...

Buying Your Next Diagnostic Tablet

When you last invested in a diagnostic tablet for your shop, did you consider it a potential gateway to increased revenue? Probably not. It’s likely you viewed it as a necessary...

Access Carside OEM Repair Data with MOTOR TruSpeed

Now available on all Autel MaxiSYS Ultra Series tools, MOTOR TruSpeed Repair delivers expanded OEM service and repair data within days of being published by

Voice Your Opinion!

To join the conversation, and become an exclusive member of Vehicle Service Pros, create an account today!