Dodge Ram Air Suspension

April 9, 2021

A “small number” of 2014-2015 RAM 2500 and 3500 trucks equipped with an air suspension may experience a sensor issue.

A “small number” of 2014-2015 RAM 2500 and 3500 trucks equipped with an air suspension may experience a MIL on with DTC C1556-14 (ride height air pressure sensor – circuit short to ground or open). In addition, the customer may experience a non-operative auto level rear air suspension. Using a scan tool, check for DTCs. Address all non-related codes before proceeding.

If code C1556-14 is present, inspect the wiring harness for shorts and grounds and repair as needed. Replace the air compressor and refill the system with nitrogen. Replacement compressors are available as P/N 68239571AA. Tool P/N 10247B is required to refill the system.

About the Author

Information courtesy of Mitchell 1

Information for Technical Service Bulletins comes from ProDemand, Mitchell 1's auto repair information software for domestic and import vehicles. Headquartered in San Diego, Mitchell 1 has provided quality repair information solutions to the automotive industry since 1918.

About the Author

Mike Mavrigian | Motor Age Editor

Mike Mavrigian has written thousands of automotive technical magazine articles involving a variety of  specialties, from engine building to wheel alignment, and has authored more than a dozen books that crisscross the automotive spectrum. Mike operates Birchwood Automotive, an Ohio shop that builds custom engines and performs vintage vehicle restorations. The shop also features a professional photo studio to document projects and to create images for articles and books.

Sponsored Recommendations

Learn how electronic parking brake actuators have replaced manual systems and now play a key role in advanced safety features like automatic emergency braking. This WIYB Training...
Not all fuel injectors are created equal. In this WIYB Training Series, we compare Standard® Fuel Injectors against OE, low-cost imports. See why precision engineering and rigorous...
Carrying active OEM subscriptions for all manufacturers is not possible for many shops. However, access to this software is required for certain modern vehicles and repairs, and...
Enhance your collision repair workflow with Autel’s IA900, a process-driven solution integrating precision alignment, bi-directional diagnostics, and ADAS calibration. Designed...

Voice Your Opinion!

To join the conversation, and become an exclusive member of Vehicle Service Pros, create an account today!