Each of the Blair Rotabroach Master Kits are an all-in-one set containing 16 different sizes of Rotabroach Cutters for drilling holes in materials up to 1/4" thick. The Fractional Kit (No. 11201) includes cutters from 1/4" to 3/4", and the Metric Kit (No. 11201) includes sizes from 6mm to 20mm. Each kit is packaged in a sturdy plastic storage case and includes an arbor assembly, extra pilots, center punch, washers and instructions on use. Rotabroach Cutters can be used in handheld electric drills with 3/8" chucks and in drill presses.
Features and benefits
Rotabroach Master Kits contain 16 different sizes of Rotabroach Sheet Metal Hole Cutters. The kit adds many 32nd and 64th sizes which were previously not available. Included in the kits are an arbor, extra pilots and center punch in a plastic storage case.
Rotabroach Cutters are for use in handheld drills or drill presses. They make holes 3x faster and last 10x longer than twist drills or hole saws. Rotabroach Cutters cut the material rather than ripping and tearing through, as conventional tools do. There is no deforming of the surface and they leave a clean burr-free hole.
These tools are designed for sheet metal, plate and plastic materials up to 1/4” thick. Rotabroach cutters are used in all areas of the automotive industry from manufacturing, general metal fabrication, collision, racing, specialty/aftermarket installation and automotive restoration.
Origin
The precise cutting angles on the teeth of the Rotabroach Cutter allows for faster holemaking and longer tool life. Because users are cutting the outside ring and not turning the entire hole into chips, they need less horsepower to make the hole. The result is users can drill the hole faster and with longer tool life, saving time and money.
Because of the high-quality of the hole which is made, users do not have a secondary operation of grinding down the burr on the backside of the hole.
Specs
Rotabroach Cutters are made from M2 high speed steel and precision ground and harden to very tight tolerances. The products are proudly made in the USA.
Selling points
- All in one kit for most any size hole up to 3/4" or 20mm.
- Premium quality and Made in USA.
- Remove spotwelds, plug holes for welding, access holes, pop rivet holes, bolt holes and holes for all types of fabrication.
Suggested retail price
$310
For more information
Blair Equipment Co.
3001 Hougen Dr
Swartz Creek, MI 48473
(800) 426-7818
