Mike Hess has been a Mac tool distributor for 22 years. Eleven years ago he hired his brother, Leroy, to drive a second route. For three years Mike was Mac’s Number One distributor, and for four years, Mike and Leroy were Mac’s Number One “Two-Man Team.” Mike plans to be Number One again, because he works hard to be “One of Two.”

Mike explains that in any given route, there will be two successful tool distributors. With flat-rate pay structures and the drastic reductions in flat-rate times in recent years, plus economic issues still plaguing the automotive service industry, plus competition from Internet tool sales, Mike says it’s rare for one route to support more than two distributors. “Two (distributors) are going to make it, the third will struggle, and a fourth won’t survive.”

Off the beaten path

Mike has developed two strategies to make sure he’s always one of the two. One is the way he has carefully built and maintained a profitable route. Even in shops where Mike is the most successful distributor, he knows he’ll always be competing against at least one more successful distributor, and maybe one or two others. 

That’s one reason Mike says there is less business available at dealerships compared with smaller shops: the techs’ business is divided among many tool distributors. Mike still considers his dealership stops necessary, but for the amount of time spent versus the amount of money collected, he only wants to stop long enough to service his loyal Mac customers.

About one third of Mike’s route consists of stops in the farm country of Lebanon County, PA (east of Harrisburg), mostly shops that no other distributors visit.

Some of those customers he sees only twice a month, like a school bus fleet operator, a small excavation business, a classic car restoration shop and a few others who are far enough off the beaten path that no other distributors have bothered to look for them. He found these shops just by “driving along, always on the lookout for opportunities.”

Opportunities are definitely there. Even though more windshield time is required to see these customers, Mike gets all of their tool business, and he knows the time-to-dollar ratio is in his favor.

Averaging about 650 miles to see 350 customers a week, Mike is constantly grooming his route, rearranging or replacing stops to look for a better return on his time.

Once each year, he examines his schedule and replaces the ten least profitable stops. He says there are two shops he knows he should replace now, but he likes the people so he keeps stopping there.

Earning business

Another key to his success is the understanding that, at most of his in-town stops, “Nobody needs me. If I stopped coming here, another truck would be here tomorrow and (customers) would still get their tools.” He understands that each customer’s business is a privilege that must be earned with service and professional respect.

The importance of professional relationships became very clear when Mike and his brother experimented with trading routes. Even though the same names were on the truck, Mike learned that Leroy’s customers are indeed loyal. “The very second I walked in, the resistance was there. They didn’t know me, I didn’t know them. I got calls from my customers (who his brother visited that day) telling me ‘Hey, I’m dealing with you.’” That experiment ended after one week.

The day we rode with Mike, he dismounted the truck at each stop with a new air-powered cutoff tool with an extended head, great for removing the rear axle on Windstar minivans (Ford TSB 03-16-1). Most techs recognized its value right away and Mike expects to sell several copies of that tool in the coming weeks. We noticed that no one asked how much it cost and mentioned this to Mike. “The longer you do this professionally, the less they ask about price. It takes time, but eventually they like to deal with you, look forward to seeing you come in the door. No, they don’t buy every week, but they wouldn’t want you not to come.”

We also watched Mike ask for the sale, often selling tools to customers even though they hadn’t asked for them. But he knows where to draw the line. “Never take the first ‘no.’ That guy said ‘no’ one time, I didn’t believe it. He said ‘no’ the second time, that’s when I stopped…never make them say ‘no’ three times.” Once again, the number is Two.

Being Professional

Mike says he averages 100 sales and 300 transactions per week. He didn’t want to discuss skips, except to once again stress the importance of professional relationships. “The longer you’re in this business and the longer you treat people professionally, the less trouble you have getting paid.” Mike says a professional relationship works both ways, and he expects to be paid at every stop. In fact, that’s exactly what happened the day we rode along.

A professional attitude and appearance are things Mike takes very seriously. He feels professional appearance is becoming sadly less common in the mobile tool industry, noting that he’s seen more than a few distributors (and even managers) of all flags working in shorts, T-shirts, jeans, dirty boots and with a poorly groomed appearance. “Your professional appearance is a sign of respect to your customer, and (of) self-respect too. You will never reach true heights of success dressed in the rags of failure,” he says, “It affects your attitude as much as your image.” Naturally, his attitude extends to the appearance of his trucks too, inside and out: the trucks are washed every evening.

Mike estimates his total work week is about 80 hours. Leroy drives the other route and helps stock the trucks. Mike’s wife Linda is their accountant and assists with returns and ordering, and his sons Lionel and Lavelle help keep the trucks clean and tidy. That’s a lot of man-hours, but Mike has been Number One in sales seven times in 22 years, and he says he would do it the same way again.

“There is no one thing that guarantees success, it’s a thousand little things done right over and over again. The good guys don’t need an explanation of this; the losers will never get it.” He may be working hard to be one of two (or one of one), but Mike Hess stands out as one among many.

About the Author

Jacques Gordon

Jacques Gordon is the former editor-in-chief of PTEN and Professional Distributor magazines. His background includes 10 years as an automotive technician and 10 years in Tier 1 suppliers’ engineering labs testing gaskets, fuel injection systems and emission control systems.

He continues to stay abreast of the latest technical developments through editorial research and technician training seminars. He holds an ASE Master Technician with L1 Certification and a Master Hybrid Technician certification from ACDC.

Jacques has been writing for aftermarket magazines since 1998, and he has earned a reputation as one of the best technical writers in the business. He is a winner of two American Society of Business Press Editor awards and several company editorial awards.

He is currently the video script writer for the CARS Training Network in Ontario, Canada.

Connect with him on LinkedIn.

Sponsored Recommendations

Tesla service, repair, and diagnostics

Keep update-to-date on how to maintain your customer's Tesla vehicles.

Tool Review: Ascot Supply 3/4" Drive 600 ft-lbs Split Beam Torque Wrench, No. 168-00600

Reviewed by Eric Moore, manager at DeMary Truck in Columbus, Ohio.

Diagnosing an engine misfire

Recognizing a misfire is the easy part; the challenge is determining its cause.

The ‘Iron Giant’

This technician spent two and half years putting together his ‘giant’ of a toolbox setup.

Voice Your Opinion!

To join the conversation, and become an exclusive member of Vehicle Service Pros, create an account today!