Protect your employees from heat-related illness

May 28, 2020
Heat illness can be deadly. As a matter of fact, 39 workers died and more than 4,000 were injured due to occupational heat exposure in 2016.

Heat illness can be deadly. As a matter of fact, 39 workers died and more than 4,000 were injured due to occupational heat exposure in 2016.1 The good news is that heat deaths and illness are preventable.

The human body needs to maintain an internal temperature of 98.6 Fahrenheit and can tolerate only small deviations from this temperature. Warm temperatures and physical activity can raise the body’s temperature and put an employee at risk of severe harm.

The body normally cools itself by sweating. During hot weather, especially with high humidity, sweating isn't enough. Body temperature can rise to dangerous levels and you can develop heat-related illnesses that include:

§  Heatstroke - a life-threatening illness in which body temperature may rise above 106° Fahrenheit in minutes; symptoms include dry skin, rapid, strong pulse and dizziness

§  Heat exhaustion - an illness that can precede heatstroke; symptoms include heavy sweating, rapid breathing and a fast, weak pulse

§  Heat cramps - muscle pains or spasms that happen during heavy exercise

§  Heat rash - skin irritation from excessive sweating

The risk of heat-related illness becomes greater as the weather gets hotter and more humid. This situation is particularly serious when hot weather arrives suddenly early in the season, before employees have had a chance to adapt to warm weather.

Any employee exposed to hot and humid conditions is at risk of heat illness, especially those doing heavy work tasks or using bulky protective clothing and equipment. Some employees might be at greater risk than others if they have not built up a tolerance to hot conditions including new employees, temporary employees, or those returning to work after a week or more off. All employees are at risk during a heat wave.

Employees suffering from heat exhaustion are at greater risk for accidents, since they are less alert and can be confused. Having a serious injury or death occur at your dealership or collision center affects everyone at the organization.

So what are you doing to protect your employees from heat related illness?

Under OSHA law, employers are responsible for providing workplaces free of known safety hazards. This includes protecting employees from extreme heat. It’s time to establish a complete heat illness prevention program, one that includes planning for emergencies, training employees on prevention, and monitoring employees for signs of illness.

Start by ensuring your dealerships and collision centers have:

1.    Plenty of hydration stations with water and electrolyte replacement drinks like Sqwincher.

2.    Shaded or air-conditioned areas available for breaks and if employees need to recover.

3.    Taught employees the common signs and symptoms of heat illness.

4.    Reminded employees of the importance of drinking water frequently, even when they are not thirsty.

5.    Communicated to employees who should be notified if there is an emergency and that it is in everyone’s best interest to report symptoms early.

You may also consider providing your employees with cooling products such as Chill-Its cooling wrist sweatbands, towels, vests and hats. In addition, starting work earlier and ending earlier or adding more scheduled breaks during heat waves are options for consideration.

1Bureau of Labor Statistics

About Lawson Products, Inc.
Founded in 1952, Lawson Products, Inc., headquartered in Chicago, IL, sells and distributes specialty products to the industrial, commercial, institutional and government maintenance, repair and operations market (MRO). The company is dedicated to helping customers in the U.S. and Canada lower their total cost of operation by increasing productivity and efficiency. The combination of Lawson Managed Inventory and the company’s problem-solving professionals ensures customers always have the right parts to handle the job. Through The Bolt Supply House, customers in Western Canada have access to products at several branches. Under its Kent Automotive brand, the company provides collision and mechanical repair products to the automotive aftermarket.

Lawson Products ships from several strategically located distribution centers to customers in all 50 states, Puerto Rico, Canada, Mexico, and the Caribbean.

For additional information, please visit www.lawsonproducts.com or www.kent-automotive.com.

About the Author

Jason Gatziolis | Senior Product Management Manager, Lawson Products

Jason Gatziolis is a Senior Product Management Manager with Lawson Products.

Sponsored Recommendations

The impact of electric vehicles on the automotive market

Steps to help prepare your shop for electric vehicles.

The benefits of digital inspection tools

A good diagnostic tool arsenal should help you complete jobs faster and more efficiently.

Tool Review: Mayhew Tools 14-pc Micro Hand Tool Set

Reviewed by Benedict Grubner, technician at Mercedez-Benz of Burlington in Burlington, Massachusetts.

Big-Time Boxes: Korey Wong, Mac Tools

Although this technician works out of his service truck most days, he’ll never give up on his customized jack-o'-lantern-colored Macsimizer.

Voice Your Opinion!

To join the conversation, and become an exclusive member of Vehicle Service Pros, create an account today!