Delphi announces five new Mass Air Flow sensors covering nearly 1 million vehicles

Sept. 15, 2014
Delphi Product & Service Solutions announces five new Mass Airflow Sensors cover nearly 1 million vehicles built from 1990 to 2013. 

Delphi Product & Service Solutions announces five new Mass Airflow Sensors cover nearly 1 million vehicles built from 1990 to 2013. Applications cover manufacturers including Nissan, Audi, Toyota, and Infiniti. Part numbers: AF10198, AF10209, AF10214, AF10218 and AF10221.

Visit go.delphi.com for specific part information.  Inventory will be available in the Q3 2014.

What MAF Sensors Do MAF sensors measure intake airflow and send this information to the ECU.  When the ECU receives the information from the MAF sensor and oxygen sensors, it makes adjustments to the amount of fuel being injected into the engine to compensate for excess air or excess fuel.

When a Delphi MAF sensor is used in combination with Delphi oxygen sensors, the engine's air/fuel ratio can be controlled much more accurately.  All of these functions ensure accurate air/fuel ratio for optimal engine performance in any driving condition.

Why Sensors Fail
Contamination is a key reason why MAF sensors fail and require replacement.  As air, dirt and other debris get into the sensor, the parts become contaminated and result in failure.  Drivers often notice sluggish performance or a more frequent need to refuel. 

THREE REASONS TO CHOOSE DELPHI MASS AIR FLOW SENSORS

1.  All-New Products Go Through Stringent OE Testing
Unlike offerings from many competitors, Delphi MAF sensors are brand-new, never remanufactured. All parts are tested and calibrated to OE standards using highly accurate OE equipment.  By testing to OE specifications, Delphi ensures that the sensors provide accurate readings and airflow output, which helps to reduce comebacks.

2.  No Flow Tubes Mean Less Storage Space and a Greener, Quicker Repair
Delphi’s direct sensor solution allows technicians to focus on the part that needs to be replaced. Ninety-eight percent of the time it is the sensing electronics in the probe that fail.  By eliminating the need to replace the plastic flow tube, Delphi provides a greener repair solution. 

3.  Clam Shell Packaging Protects the Product
Shops receive Delphi Mass Airflow sensors in a plastic clamshell, which helps protect the sensing elements from damage.

Learn more about Delphi at delphiautoparts.com

Subscribe to Motor Age and receive articles like this every month…absolutely free. Click here

Sponsored Recommendations

Access Carside OEM Repair Data with MOTOR TruSpeed

Now available on all Autel MaxiSYS Ultra Series tools, MOTOR TruSpeed Repair delivers expanded OEM service and repair data within days of being published by

ADAS Case Study: From 10 Calibrations a Month to Over 10 A Day

Originally published by Vehicle Service Pros, March 26, 2024

Autel MaxiTPMS TS900: 3-in-1 TPMS Tablet

Originally published by Tire Review, April 4, 2024

Ask The Expert: The Basics & Benefits of Bringing ADAS Calibrations In-house

Originally published by Vehicle Service Pros, March 26, 2024

Voice Your Opinion!

To join the conversation, and become an exclusive member of Vehicle Service Pros, create an account today!