Don’t Trust the Intake

Feb. 9, 2018
This bulletin applies to all current and previous fuel-injected GM vehicles. When replacing an engine due to internal damage, extreme care must be taken when transferring the intake manifold to the new engine long block.

This bulletin applies to all current and previous fuel-injected GM vehicles. When replacing an engine due to internal damage, extreme care must be taken when transferring the intake manifold to the new engine long block.

After removing the intake manifold from the engine, carefully inspect all cylinder head intake ports to see if the valve heads are still present and not bent. Usually when the valve heads are missing or sufficiently bent, internal debris will be present in varying degrees in the intake port of the cylinder head. If debris is present, the intake manifold should be replaced.

The replacement is required due to the complex inlet runner and plenum design, making thorough component cleaning difficult and often impossible to verify removal of all debris. Installation of a contaminated intake manifold can result in damage and potential failure of the new engine.

Sponsored Recommendations

Learn how electronic parking brake actuators have replaced manual systems and now play a key role in advanced safety features like automatic emergency braking. This WIYB Training...
Not all fuel injectors are created equal. In this WIYB Training Series, we compare Standard® Fuel Injectors against OE, low-cost imports. See why precision engineering and rigorous...
Carrying active OEM subscriptions for all manufacturers is not possible for many shops. However, access to this software is required for certain modern vehicles and repairs, and...
Learn how to properly lubricate your AIRCAT air tools to keep them running at peak performance. Discover essential daily maintenance and storage techniques, along with the right...

Voice Your Opinion!

To join the conversation, and become an exclusive member of Vehicle Service Pros, create an account today!