PPG Commercial Coatings group of PPG Industries’ automotive refinish business recommends the following precautions be taken to insure a long-lasting finish on a new vehicle, says J.J. Wirth, PPG’s brand manager fleet segments, USCA, commercial coatings. Failure to follow these recommendations may result in voiding the paint warranty.
PPG (www.ppg.com) is a developer of paints, coatings and materials.
- During first 30 days, do not allow tree sap, bird droppings, gasoline, antifreeze, transmission fluid or windshield solvent to stand on painted surfaces. Remove as soon as possible.
- Wash the vehicle by hand with cold water and a very mild detergent soap. Use a soft cloth or clean sponge, and wash the vehicle in the shade.
- Do not wax vehicle within the first 90 days. The vehicle may be polished with a premium quality product after 90 days.
- If any mounting of additional equipment (lights, handles, etc.) is necessary, use these steps:
- Drill mounting holes using a sharp drill bit.
- After drilling, remove all metal shavings.
- Prior to mounting equipment, apply an electrolysis corrosion control product to all screws to help prevent corrosion around the newly drilled holes.
