| | | | | | | | Neu Tool & Supply Corp. held its annual tool fair on September 26 and 27 at their new warehouse in Waukesha, Wisconsin. |
|
|
| | |
| |
|
|
|
| | | | | | Powered by a 4,400mAh rechargeable battery for convenient and rapid charging. |
|
|
| | |
| |
|
|
|
| | | | | | Distributors face the challenge of handling unpaid bills without damaging customer relationships. |
|
|
| | |
| |
|
|
|
| | | | | | Products featured in this video: The Blackout Kit from Challenger Lifts is designed for use with two-post lift models so facilities can manually lower a lift during any loss of electricity. The Hose Clamp Retainer Tab, No. HCRT1, from VIM Tools is designed to hold open spring clamps, eliminating the need for a specialty hose clamp plier. The OTC Front... |
|
|
| | |
| |
|
|
|
| | | | | | The TOPDON UltraDiag Moto features coverage for over 80 motorcycle brands, including Honda, Harley, and BMW. |
|
|
| | |
| |
|
|
|
| | | | | | The Pro Shear Socket 2-1/8", No. 31610, from Lisle Corporation is used to remove and install the hub nut on 2021 and newer Chevrolet Silverado and GMC Sierra with 11-1/2" or 12" single rear wheel axle hubs. It may work on other vehicles with 2-1/8" I.D. axle nut/O.D. spindle. Full-floating hubs are held on with a circular nut that is engaged by the... |
|
|
| | |
| |
|
|
|
| | | | | | The 11-pc 1/2" Drive SAE X-TREME Grip Socket Set, No. SP33035, from SP Tools USA, is made from chrome-vanadium steel and features a triple-layered chrome finish for corrosion resistance. The sockets also feature Center Drive technology that allows them to undo bolts up to 90 percent rounded off by applying pressure to the center of each bolt's flats... |
|
|
| | |
| |
|
|
|
| | | | | | Autel's MaxiSYS Ultra S2 diagnostics tablet campaign donates $100 per unit sold to No Kid Hungry, with a cap of $50,000. |
|
|
| | |
| |
|
|
|
| | |
|
| | |
|
