| | | | | | | | | The Performance Tool 3-pc 1/2" Drive Damaged Lug Nut Socket Set, No. W87140, is designed to remove damaged lug nuts and rusted or rounded-off nuts and bolts. Its heat-treated chrome molybdenum steel construction is engineered for strength, durability, and corrosion resistance, and it's black phosphate coated for durability and corrosion resistance.... |
|
|
| | |
| |
|
|
|
| | | | | | The 1/4" Pry Bar with Strike Cap, No. 35100, from Lisle Corporation is designed to remove seals, electrical connectors, O-rings, plastic caps, interior trim pieces, metal, and plastic retainers. The strike cap in the top of the handle can be tapped with a hammer, and the 1/4" square shaft pry bar has a pocket clip and measures 5" in length. In addition... |
|
|
| | |
| |
|
|
|
| | | | | | The Streamlight Wedge XT EDC Flashlight features an intuitive tail switch that provides tactile control over the light's momentary or constant-on operation. A Five-Tap lockout feat prevents the light from turning on inside a pocket or bag, and a deep pocket clip secures the light to any pocket or other places for easier access. This flashlight uses... |
|
|
| | |
| |
|
|
|
| | | | | | The Millermatic 142 MIG Welder from Miller Electric is equipped with Auto-Set technology to help users eliminate guesswork and ensure they are using the right parameters by simply setting the wire diameter and material thickness. Users can then easily fine tune the parameters even further using its digital segment display, if needed. The machine is... |
|
|
| | |
| |
|
|
|
| | | | | | The N9EV EV Smart Diagnostic System from Xtooltech USA is designed to cover most EV brands. It operates on a 9.7" high-performance diagnostic tablet that supports Bluetooth communication, DoIP protocol, and CAN-FD protocols. The N9EV includes Tesla adapters with OEM-level diagnostic functions, battery pack detection, and topology mapping, and is ADAS... |
|
|
| | |
| |
|
|
|
| | | | | | The 10-pc Damaged Torx Fastener Extractor Set, No. AETS10, from Strategic Tools & Equipment is designed to remove Torx fasteners up to 100 percent rounded and comes available in foam packaging. The 1/4" drive sizes included in the set are T10, T15, and T20, while the included 3/8" drive sizes are T25, T27, T30, T40, T45, T50, and T55. The set is also... |
|
|
| | |
| |
|
|
|
| | | | | | The Brass Knuckle Read Safety Glasses, No. BKREAD-6010, provide bifocal eye protection and are designed to help prevent the hazardous practice of switching back and forth between regular safety glasses and reading glasses on the job. The protective readers are available in five diopter strengths: 1.0, 1.5, 2.0, 2.5, and 3.0. A durable polycarbonate... |
|
|
| | |
| |
|
|
|
| | | | | | The Gray Tools 25-pc 1/4" Drive Insulated Socket Set, No. 15025-I, includes 12-point SAE sockets ranging from 3/16" to 9/16" and 6-point metric sockets from 4mm to 15mm. The sockets are stored in a dual-color foam organizer with imprinted size markings on the top layer for quick identification. Each socket is individually insulated to 1,000V and tested... |
|
|
| | |
| |
|
|
|
| | | | | | The Hazet Quick-Clamping Puller Set, No. 1750/5, features five of the most common quick-clamping pullers in one set: 1750-9, 1750-11, 1750-14, 1750-19, 1750-26. Each of the tools in the set is a two-arm puller that features a one-nut fixation per arm for quick adjustments, a solid all-steel bridge, and forged arms that can be released from the bridge... |
|
|
| | |
| |
|
|
|
| | | | | | The Thexton Best Angle Back Probe, No. 960, is designed to access electrical circuits from the rear of the connector to prevent piercing wires and possibly damaging the circuit. The Best Angle Back Probe allows users to get at tucked-away connectors more easily with a hook design. The added feature allows for flexibility and assures a good connection... |
|
|
| | |
| |
|
|
|
| | |
|
| | |
|
