|  | | | | | | | | The Power Probe DM500MAX Digital Multimeter is designed for superior accuracy and measurement reliability. Built for even the harshest work environments, the tool contains watertight gaskets at the seams, a rotary switch, input terminals, and a battery cover to keep out dust, dirt, and moisture. The DM500MAX can survive falls and drops with its outer... |
|
|
| | |
| |
|
|
|
| | | | | | The Gaither Tool Company Gen2 Bead Bazooka is designed to work with an extensive range of tire sizes and types ranging from motorcycles to light agricultural vehicles. The next generation bead seater range offers twice the power and is equipped with significantly upgraded trigger-operated rapid air release (RAR) valve technology compared to the original... |
|
|
| | |
| |
|
|
|
| | | | | | The Miller Electric Millermatic 355 MIG Welder is an easy-to-use power source designed for welders of any skill level. It can operate on single-phase or three-phase AC power and provides MIG and pulsed MIG capabilities for mild steel, aluminum, and stainless steel in thicknesses from 22 gauge to 1/2". The Millermatic 355 has a 7" LCD user interface... |
|
|
| | |
| |
|
|
|
| | | | | | The OTC Rear Seal Installer, No. 5853, is designed to install crankshaft rear oil seal and wear sleeve on select Navistar, MaxxForce, N9, N10, and DT engines. The kit includes a 180mm adapter ring for 2010 and later engines. The installer features a crank adapter, seal pusher, thrust bearing, installation nut, depth adapter, and two head screws. Made... |
|
|
| | |
| |
|
|
|
| | | | | | The Mastercool Digital Thermometer/Hygrometer with Bluetooth, No. 52234-BT, is designed to work with Mastercool's Connect app to remotely provide dry bulb temperature, wet bulb temperature, and relative humidity. It allows for varying the refrigerant charge in a system and seeing in real time, how the supply parameters change. With a convenient clip... |
|
|
| | |
| |
|
|
|
| | | | | | The Autel MaxiCharger AC Wallbox Home 40A EV Charger, No. MC40AP14S, is a 240V-40A Level 2 smart charger compatible with all EV and hybrid plug-in vehicles. It features a sleek contemporary design in dark gray and is installable indoors or outdoors. The unit offers adjustable charging up to 40A and features a 25' long universal (J1772) charging cable... |
|
|
| | |
| |
|
|
|
| | | | | | The Mueller-Kueps Sensor Tap Kit, No. 506 021, is designed to professionally restore the NOx sensor hole thread without damaging the exhaust system. The tools are for sensors sizes M20x1.5 and M22x1.5. Coarse carbon deposits are removed by the guide pin with cleaning grooves. Measuring just 27mm in length, the extra short tools can be used in extremely... |
|
|
| | |
| |
|
|
|
| | | | | | The Innovative Products of America Smart MUTT X, No. 4105, is a universal, remote-controlled, diagnostic light trailer for all North American trailers. The unit is ideal for semi, RV, utility, boat, and horse trailer-type connections. It's able to test five of the most common trailer types, including 7-way flat (spade), 7-way round, 6-way round, and... |
|
|
| | |
| |
|
|
|
| | | | | | The Lisle Corporation No Splatter Pad with Supports, No. 38800, protects work areas from messy oil splatters. The porous material of the splatter pad allows fluid to quickly pass through into the pan. The pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil, and other solvents. The pad is not for coolants... |
|
|
| | |
| |
|
|
|
| | | | | | The VIM Tools Hub and Stud Cleaning Kit for Trucks, No. HSC200, includes the HSC1 Hub and Stud cleaning tool with a 1/4” hex to 1/2” square adapter, the HCP23 4-pack of 23mm hub cleaning pad, and SCB22 4-pack of 22mm stud cleaning wire brush. The HCS1 can be used with a drill or impact wrench and has a quick-lock system for switching heads easily. ... |
|
|
| | |
| |
|
|
|
| | |
|
| | |
|
