The Killer Tools Vacuum Floor Puller, No. ART23, can pull from most shop floor surfaces. Simply roll the puller into position, check that the vacuum plate is not over a crack in the floor, connect to shop compressed air, step on the vacuum plate, and start pulling. Tested at over 1,200 lbs of pulling force for sheet metal non-structural pulls on both steel and aluminum. Ideal for use on sheet metal realignment and dent removal. Other features include one-pin height adjustment, anti-tip safety features, and down-pull capability. Including the pulling tower, users receive a vacuum anchor plate, a pulling strap, and a vacuum plate storage strap. The product is 60" tall.