|  | | | | | | | | The Wera 2-pc Zyklop Mini 1 Bit Ratchet 1/4" SB with 1/4" drive, No. 8001, is designed to be suitable for the direct take-up of bits with a 1/4" hex head drive. The set is drop-forged with a full-steel design and a torque of over 47ft-lbs. Equipped with 60 teeth, it has a return angle of six degrees and a left/right switchover. The thumbwheel is designed... |
|
|
| | |
| |
|
|
|
| | | | | | The COExhaust Sliding Suction Rails are designed to easily provide the required ventilation to the spot where it is needed. The rails can be equipped with reels or simply a hanging hose. The rail system utilizes a 5" or 6" diameter rail profile, depending on required air volume, and is manufactured of extruded aluminum, making it seamless and one piece... |
|
|
| | |
| |
|
|
|
| | | | | | The RapidFix Extreme Bond Molding Tape is an acrylic dual-sided tape system. The durable tape bonds to most surfaces and can withstand extreme temperature fluctuations and weathering. Automotive uses include attaching trim, window muntin bars, body side moldings, rocker panels, emblems, and cladding. The tape’s strong adhesive can also be used to pull... |
|
|
| | |
| |
|
|
|
| | | | | | The W3131 IQV20 Cordless Compact 3/8" Impact Wrench from Ingersoll Rand offers breakaway torque up to 400 ft-lbs, a maximum speed of 2,800 rpm, and 4,200 bpm for rapid removal of fasteners. The compact impact wrench weighs 2.3 lbs and measures 5.3" in length. It also features an overmolded ergonomic grip to provide comfort for extended periods of use... |
|
|
| | |
| |
|
|
|
| | | | | | The Lisle Corporation Heavy-Duty Yoke Puller, No. 60050 is for use on yokes with a bearing diameter between 1-7/8" and 2-3/16". This yoke puller is designed to remove yokes on transmissions and rear-end differentials without damage to yokes or other components. The kit comes with three sets of grade eight flange bolts to fit different bolts. All components... |
|
|
| | |
| |
|
|
|
| | | | | | The CTA Tools 5-pc Wire Install Tool Kit, No. 1450, is designed to help users place and extract cables, connectors, and components with ease, while reducing the chance of damage to wire insulation. Fitted with the ability to push, pull, and feed wires safely and accurately, the tool kit's tools measure approximately 6" in length, making them easier... |
|
|
| | |
| |
|
|
|
| | | | | | The Solder-It Butane Blow Torch with Flame Control, No. PT-520CR, is designed for smoothing paint, culinary brazing, and light welding. To start, it uses a water-resistant Piezo electronic ignition system. The adjustable airflow produces a soft and solid flame for use in various projects. At its mid-setting, users can get 30 minutes of continuous burn... |
|
|
| | |
| |
|
|
|
| | | | | | The M7 5-in-1 Air Ratchet, Drill, and Grinder, No. NE-0405-KIT, is designed to give users hours of comfortable use thanks to its ergonomic composite rubber grip. It comes in an oil-resistant foam tool holder inside a blow-molded case. The kit features a drive tool fitted with five tool heads which include a pneumatic die grinder, air angle grinder,... |
|
|
| | |
| |
|
|
|
| | | | | | The Grey Pneumatic 1/4" Drive 3-pc Impact Extension Set, No. 9703E, contains three extensions in 3", 6", and 10" lengths. These extensions feature a spring-loaded friction ball retainer for positive socket retention. |
|
|
| | |
| |
|
|
|
| | | | | | The OEMTOOLS 2-pc Hose Clamp Pliers, No. 25198, are designed to remove flat-typed hose clamps in hard-to-reach areas. This plier set includes flat band hose clamp pliers and angled hose clamp pliers with handles double dipped for a comfortable grip. The pliers are made to service most ring-type or flat band hose clamps and the jaws swivel to access... |
|
|
| | |
| |
|
|
|
| | |
|
| | |
|
