The following video guides users through implementation of the Super Mutt Trailer Tester Pro, a diagnostic and remote controlled trailer, lighting and air brake testing platform, in a shop.
The Super MUTT Trailer Tester Pro Edition, No. 9008-DL is ideal for both on and off-site commercial trailer testing and repairs.
ELECTRICAL TESTING (12/24 Volt Operation)
- Power lights: Manually, All-On, Auto Scan, or by Remote Control
- Audible and visual alerts: cross, open, overloaded and short circuit indication
- Pulsar mode allows diagnostic repair
- Advanced trailer wiring diagnostics
- Amperage readout and range (0-20 amps)
- Cable testing
- Ground failure detection: differentiates between wire and chassis ground
ABS TESTING
- Access ABS blink codes
- Test ABS fault blink codes via Auxiliary and Brake Circuit activation (i.e. Meritor/Wabco, Bendix TABS-6 and Haldex systems)
AIR BRAKE TESTING
- Performs leak down test on service and emergency lines
- Remote control allows observation of slackers to measure and adjust pushrods
- Real time, repetitive brake activation to find developing problems and verify leaking servo cans
- Features an internal air regulator
REMOTE CONTROL
- Remotely test all trailer electric circuitry and air brake actuation with new 12-button remote
- Three-button remote controls test all trailer electric circuitry and air brake actuation, 200+ ft. range
- Sync multiple (12) remotes to one unit Also Included: New 12-Button Remote Control No. MUT-RM12
- Remotely test all trailer electric circuitry and air brake actuation with new 12-button remote
- 200+ ft. range
- 340mHz
- Uses battery type 23A (included)