Oil filter crushers are designed specifically to flatten oil filters and to squeeze oil out all but the last traces of engine sludge and oil from inside them. Here, an oil filter can be crushed to 25 percent of its original size.
Oil filter crushers are designed specifically to flatten oil filters and to squeeze oil out all but the last traces of engine sludge and oil from inside them. Here, an oil filter can be crushed to 25 percent of its original size.
Oil filter crushers are designed specifically to flatten oil filters and to squeeze oil out all but the last traces of engine sludge and oil from inside them. Here, an oil filter can be crushed to 25 percent of its original size.
Oil filter crushers are designed specifically to flatten oil filters and to squeeze oil out all but the last traces of engine sludge and oil from inside them. Here, an oil filter can be crushed to 25 percent of its original size.
Oil filter crushers are designed specifically to flatten oil filters and to squeeze oil out all but the last traces of engine sludge and oil from inside them. Here, an oil filter can be crushed to 25 percent of its original size.

Oil Filter Crushers And Your Business

March 12, 2013
Reasons abound for recycling oil filters and their waste oil

Years ago, oil filters were simply trash, and the waste oil from them was a byproduct that was burned in a heater or a costly disposable that a recycling company was paid to take away. Those days are over.

Recycling scrap metal and used oil is a big business now. The question is: Are you taking advantage of the value from old oil filters and recycling the metal and used oil?

This is where the purchase of an oil filter crusher - essentially a device that squeezes all of the engine sludge and oil out of a used filter and flattens it at the same time - can be a worthwhile investment.

DEALING WITH REGULATIONS

The U.S. EPA and all states have environmental regulations that affect the management practices and disposal of used oil filters. Any business that generates used oil filters is subject to these rules.

Yet, some shop owners and shop foremen scoff at environmental regulations because an agent of the government never came through their door and scrutinized their environmental practices. Even small shops are not above being slapped with fines for everything from properly evacuating refrigerant to the treatment of automotive batteries. The way in which the government treats the way waste oil is stored and disposed of is no different.

Most shops, though, are careful to follow environmental regulations, but even still are sometimes unaware of the numerous regulations that govern the disposal of waste oil and oil filters. Although many states require that used oil filters be drained for a period of 12 to 24 hours, there are shops that drain oil filters for a few seconds and then throw them into the trash. These filters would be considered hazardous waste according to the regulations, so the merely trashing of them is, obviously, improper management of used oil filters.

These shops might say: "Well, no one is digging through my trash." There is no reason to expose oneself to excess liability. Plus, there are financial benefits to the proper disposal of oil filters and waste oil.

OIL FILTER CRUSHER ROI

While a gallon of waste oil can fetch prices as high as a dollar, and scrap steel as much as 50 cents a pound, an oil filter crusher offers a realistic return on investment in a modest period of time.

For example, the Ranger Products RP-20FC Oil Filter/Can Crusher costs around $1,300. An average oil filter is about half a pound of steel. The math for ROI is pretty simple. With two oil filters making up a pound, and a pound fetching about 50 cents in scrap metal, about 5,200 oil changes pays for the machine in scrap metal alone. There are also the added profits from recycling the increased waste oil that is squeezed out.

Depending upon what vehicles are in the fleet, larger motor oil and transmission oil filters may hold as much as a pint of fluid that cannot easily be drained out. Crushing eight filters using the RP-20FC yields a gallon of waste oil, paying for the machine after about 10,400 crushed filters.

An easy way to determine if your shop will have quick or slow ROI is to look at how many oil filters you buy in a year. Chances are for every oil filter you use, there is an oil filter that is replaced which is a good candidate for the crusher. If hundreds if not thousands of oil changes and transmission services are performed a year, chances are that the ROI for the oil filter crusher would be relatively quick.

HOW OIL FILTER CRUSHERS WORK

No matter the price, oil filter crushers essentially function in the same way. The device presses the filter under high pressure and squeezes the oil out and into a storage container. Filters are then crushed to about a quarter of their original size and disposed into a drum. The more the oil filter can be crushed, the more money that can be made via selling the waste oil.

Also, the scrapper might give you a higher price for the steel as he can fit more filters in his truck with less mess, which may otherwise cut into his bottom line.

Modern oil filter crushers connect to an existing shop air supply and use that to derive the force necessary to crush an oil filter. Again using the RP-20FC as an example, that particular unit applies 10 tons of pressure, reducing the oil filter to 25 percent of its original size. The unit includes a 12-1/2" diameter cylinder, pressure regulator and air moisture separator, and an automatic safety door that automatically ceases press operation when opened. A transparent door provides a view of the crushing process.

In order to use any filter crusher safely, make sure that the door remains closed at all times during the crushing operation. When choosing an oil filter crusher, it is wise to purchase a unit that has a door with an integrated safety switch that automatically stops the press if the safety door is ajar. A feature like this makes accidents much less likely.

CHOOSING AN OIL FILTER CRUSHER

To get the most for your money on a filter crusher, it is wise to choose one that meets your business model. Some bearing presses can be retrofitted into oil filter crushers, but they suffer from being hand operated and messy. This hampers ROI because of labor and cleaning costs.

There are larger crushers that exist that can crush larger cylindrical metal objects, such as paint cans, but most shops would need a crusher that simply compacts oil filters. How do you know which type to choose?

According to Jeff Kritzer, senior vice president of sales and marketing for BendPak, prices on oil filter crushers tend to vary due to a unit's pressing power - 10-ton versus 25-ton - and how it is powered.

There are no major differences between the oil filter crushers available, he notes. "The only real variances are whether the crusher is pneumatic or hydraulic powered, its pressing power and the overall chamber size.

"Pneumatic presses are usually less expensive and have fewer operating parts and require less maintenance. Pneumatic presses are typically medium duty presses with capacities ranging from 10,000 to 20,000 lbs of crushing force."

Kritzer says a typical auto repair shop or fleet that services light duty and some medium duty vehicles typically needs an oil filter crusher capable of a maximum of 20,000 lbs of crushing force. "For heavier duty pressing, hydraulic presses that feature an electric/hydraulic power unit and hydraulic operation valve with higher crushing forces ranging from 25,000 to 50,000 lbs of crushing force are preferable.

"Heavier diesel truck repair shops or for shops that work on agricultural equipment, buyers should explore crushers with a minimum capacity of 40,000 lbs."

Other considerations to take into account prior to making a purchase of an oil filter crusher is quality, how quickly it will operate, whether it is safe, dependability and ease of use.

About the Author

Craig Truglia