Milwaukee expands M18 FUEL line

The M18 FUEL 1/2" Extended Anvil Controlled Torque Impact Wrench with ONE-KEY features four customizable modes to deliver unique torque outputs.

2769 22 4

Milwaukee Tool has introduced the M18 FUEL 1/2" Extended Anvil Controlled Torque Impact Wrench with ONE-KEY, No. 2769-20. Delivering controlled torque output for fastening and up to 1,100 ft-lbs of nut-busting torque, this solution allows technicians to perform faster tire service without the hassle of pneumatic hoses, compressors, and torque sticks. In addition, four customizable modes prevent overtightening by delivering unique fastening torque outputs for tire service on vehicles such as sedans, light trucks, and box trucks.

As with all M18 FUEL products, the tool features three Milwaukee-exclusive innovations — the POWERSTATE brushless motor, REDLITHIUM XC5.0 battery pack, and REDLINK PLUS intelligence hardware and software. Together, these innovations deliver performance and durability for the most demanding tire service applications, as well including up to 1,100 ft-lbs of breakaway torque for more than enough power to remove rusted lug nuts.

Through One-Key, users can customize, track, and manage this tool. This includes access to four customizable Drive Control modes. All modes are pre-set with full power reverse, delivering up to 1,100 ft-lbs of nut-busting torque:

  • Mode 1: This mode is specifically designed for cars, delivering a target torque range of 40-75 ft-lbs.
  • Mode 2: This mode is for trucks and SUVs, delivering a target torque range of 75-150 ft-lbs.
  • Mode 3: This mode is for larger equipment such as box trucks and trailers, delivering a target torque range up to 450 ft-lbs.
  • Mode 4: This mode delivers full power in forward.

Milwaukee is committed to improving productivity by providing performance-driven and trade-focused solutions so users can perform an entire day’s work on one battery system. This tool is part of the M18 system, now offering more than 175 power tool solutions.

Specifications for the M18 FUEL 1/2" Extended Anvil Controlled Torque Impact Wrench w/ ONE-KEY Kit, No. 2769-22:

  • RPM: 0-1,800
  • IPM: 0-2,400
  • Nut busting torque: Up to 1,100 ft-lbs
  • Fastening torque: Up to 750 ft-lbs
  • Tool length [with battery]: 10.1”
  • Tool weight [with battery]: 7.4 lbs
  • Anvil type: 1/2" Extended Square with friction ring
  • ONE-KEY enabled: Yes
  • Warranty: 3 years
  • Includes M18 FUEL 1/2" Extended Anvil Controlled Torque Impact Wrench w/ ONE-KEY, two M18 REDLITHIUM XC5.0 battery packs, M18 and M12 multi-voltage charger, and transport bag.
  • Also available as a bare tool, No. 2769-20
More in Cordless Impact Wrenches