Heavy Duty Gear Puller, No. 6614

Sept. 19, 2018

The OTC Heavy Duty Gear Puller, No. 6614, is stout enough for almost any heavy duty application and includes a pair of metric bolts for most applications. The slim design cross block allows more room to set up in tight quarters to pull more gears. The puller has a spread range of removing gears from 2" to 7-1/4" in diameter, including most cam gears. The tempered steel rust inhibitor-coated bolts are graded 10.9, have M12x1.75" threads, and are 90mm in length. The puller has a 5-3/4" long forcing screw threaded 5/8"-18 and has a pulling reach of 3-1/4". The tool includes sliding plates to ensure smaller gear bolts up to 1.2" in diameter are always centered. The puller is treated to resist corrosion and is covered by OTC's lifetime warranty. 

Request More Information

By clicking above, I acknowledge and agree to Endeavor Business Media’s Terms of Service and to Endeavor Business Media's use of my contact information to communicate with me about offerings by Endeavor, its brands, affiliates and/or third-party partners, consistent with Endeavor's Privacy Policy. In addition, I understand that my personal information will be shared with any sponsor(s) of the resource, so they can contact me directly about their products or services. Please refer to the privacy policies of such sponsor(s) for more details on how your information will be used by them. You may unsubscribe at any time.

Latest in Tools

Photo courtesy of Oasis Scientific
Photo courtesy of PermaSafe
Industrial Nitrile Gloves
Industrial Nitrile Gloves
Industrial Nitrile Gloves
Industrial Nitrile Gloves
Industrial Nitrile Gloves
Photo courtesy of Coast Products
Photo courtesy of Coast Products