Ask the Expert: What are the biggest challenges a technician faces when trying to repair a broken exhaust manifold stud?

Feb. 27, 2016
There are actually three common challenges when attempting to repair a broken exhaust manifold stud.

Q: What are the biggest challenges a technician faces when trying to repair a broken exhaust manifold stud? 

A: There are actually three most common challenges when attempting to repair a broken exhaust manifold stud. 1) Access to the damaged stud or bolt is always limited when working on the cylinder heads. Working by the firewall or behind the shock (strut) tower presents some real challenges in order make the repair. 2) Drilling perfectly straight into the broken stud, and 3) drilling perpendicular. Most attempts to drill free-hand result in the drilling operation being off-center at least 1/32” - 1/16” or more, and typically about 6-7 degrees from the vertical axis centerline. These “off-center” and “off-perpendicular” attempts significantly increase the torque required to extract the stud. In other words, taking a bolt out at an angle and off-center is far more difficult than removing it straight-out.

Lastly, with limited space, getting an air drill into the perfect spot to drill dead-center and straight is challenging. Other options, including welding, can be effective. But in order to get a weld to “stick,” the remnant needs to be cleaned and free of all rust and corrosion. Welding temperatures need to be perfect so that the aluminum head is not damaged, and you need much more room to get a welding head in the location. Keep in mind, that since the mid 2000 engine years, many manufacturers’s moved to a stainless steel stud, or bolt, where special wire is required for those versus older models. Also, welding hardens the stud and once welding is attempted, it significantly increases the challenge to remove the broken piece. Lastly, welding is not always 100 percent effective, simply because a burr is created from the threads stretching and unwinding like a coil spring. Once unwound, the thread breaks off and jams into the soft aluminum acting precisely like a lock washer, making extraction nearly impossible with a welder. That’s where the ProMAXX ProCutter accessory really pays off.

Information provided by: ProMAXX

Sponsored Recommendations

ZEUS+: The Cutting-Edge Diagnostic Solution for Smart, Fast, and Efficient Auto Repairs

The new ZEUS+ simplifies your diagnostic process and guides you through the right repair, avoiding unnecessary steps along the way. It gives you the software coverage, processing...

Diagnostic Pre- and Post-scan Reports are Solid Gold for Profitability

The following article highlights the significance of pre-scans and post-scans, particularly with Snap-on scan tools, showcasing their efficiency in diagnosing issues and preventing...

Unlock Precision and Certainty: TRITON-D10 Webinar Training for Advanced Vehicle Diagnostics

The TRITON-D10 lets you dig deep into the systems of a vehicle and evaluate performance with comparative data, systematically eliminating the unnecessary to provide you with only...

APOLLO-D9: Trustworthy Diagnostics for Precision Repairs

The APOLLO-D9 provides the diagnostic information and resources you need to get the job done. No more hunting through forums or endlessly searching to find the right answers. ...

Voice Your Opinion!

To join the conversation, and become an exclusive member of Vehicle Service Pros, create an account today!