MAC issues reminder on refrigerant usage

The potential of increased cost of HFC-134a is a source of concern for the mobile A/C aftermarket, says the Mobile Air Conditioning Society (MACS). The concern is that market conditions will lead to improper refrigerant substitutions in mobile A/C systems.

MACS is the leading non-profit trade association for the mobile air conditioning, heating and engine cooling system segment of the automotive aftermarket.

It “strongly recommends the use of a refrigerant identifier during mobile A/C service to inform the technician of the chemical content of the refrigerant in a mobile A/C system and to verify the content and purity of refrigerant purchased in cylinders,” says Paul DeGuiseppi, MACS manager of service training. “The refrigerant identifier should conform to SAE standard J-1771.

“My primary rule when working with refrigerants is, verify and identify,” he says. “Verify that what you think is in a refrigerant cylinder is actually what’s in it and identify what is in a vehicle system before you begin work on it.

“This practice will allow for a proper repair and prevent possible contamination of mobile A/C systems or service and repair equipment.”

Current market conditions require the service industry to be vigilant when servicing mobile A/C systems and follow the vehicle manufacturer’s service requirements, says DeGuiseppi. If non-OEM approved refrigerants are installed in HFC-134a systems, possible concerns include:

• System cooling performance. • System reliability. • Material compatibility. • Chemical damage from blend refrigerants to system lubricant, seals and hoses. • Contamination with lubricants required for blend refrigerants. • Safety

Current mobile A/C systems are not designed to use flammable refrigerants. Using these may create additional concerns.

• Under the U.S. Clean Air Act, any refrigerant blend that contains CFCs, HCFCs, or HFCs cannot be vented by anyone and must be recovered at service or vehicle disposal. • Only technicians certified under the U.S. Clean Air Act can purchase blend refrigerants that contain CFCs or HCFCs. • Service facility contamination from other refrigerants and contamination of shop tools including charging and recovery/recycle equipment is possible.

Equipment that is certified to meet the SAE standards and the Clean Air Act to service CFC-12 or HFC-134a mobile A/C systems should not be used to recover or recharge a blend or other refrigerant due to contamination and possible damage to the equipment and other mobile A/C systems.

For more information visit the resources page on the MACS website at www.macsw.org.