Test Leads with Screw-off Aligator Clips, No. 629

Test Leads with Screw-off Aligator Clips, No. 629

Test Leads with Screw-off Aligator Clips, No. 629 Product Image

The Electronic Specialties Test Leads with Screw-off Alligator Clips, No. 629, are designed to work with most DMM’s currently in use. Connection to the multimeter is made via industry standard, right-angle shielded banana plugs. The alligator clips screw on and off so that, when desired, the test lead can be clamped permanently to the test point. This frees hands for other tasks, like wiggle testing and other diagnostic troubleshooting. The test leads are 48" and and CATIII 1,000V safety rated. The maximum test current is 10 amps. 

 

Expand for more details on this Product

Flexible DMM Test Accessory Kit, No. 3604

Product From E-Z-Hook

The E-Z-Hook Flexible DMM Test Accessory Kit, No. 3604, is a comprehensive test kit that includes a variety of connectors including alligator clips, probes and insulation piercing test hooks. The kit includes five different test leads of various lengths. The connectors and test leads are designed to work with most industry standard digital multimeters. The kit variety provides a choice of test connectors that can easily be interchanged depending on the requirement. The insulation piercing XEL test hook has recently been redesigned with shrouded banana sockets on both sides of the handle, allowing for greater flexibility in the field.

Get Info Now

Micro 64 square probes

Product From Jumperkits

The Jumperkits Micro 64 square probes can be used for various applications including automotive, commercial vehicles, engine-management systems, powertrain-control systems, ABS systems and airbag systems. These Micro 64 probes are available in packs of three male and three female probes. The male pin measures 0.64mm. These probes fit terminals found in the various models of Buick, Cadillac, Chevrolet, GMC and Pontiac vehicles.

Get Info Now

Heavy Duty Insulation Piercing Test Clips, No. 142-3

Product From Electronic Specialties, Inc.

The Electronic Specialties Heavy Duty Insulation Piercing Test Clips, No. 142-3, are sold as a set of two probes and are designed to work with most DMM/Scope test lead kits currently in use. They will connect to the main test lead in the kit via straight banana plug connection. These probes are designed to pierce wire insulation and tap readings in wires where a direct connection is not possible. After use, special care should be taken to seal the point where the wire was pierced.These probes feature CATIII 1000V safety rating. The maximum test current is 5 amps.

Get Info Now

20-Piece Back Probe Kit, No. 23500

Product From S & G Tool Aid Corp.

The S & G Tool Aid Corp. 20-Piece Back Probe Kit, No.23500, is used to back probe harness connectors, fuel injectors and automotive sensors. The stainless steel probes come in straight, 45-degree and 90-degree profiles in 0.027" and 0.040" diameters. The probes are color-coded for easy identification and are compatible with the standard 4mm plug. Also included with the kit are 12" extension leads, color-coded the same as the back probes for use in recessed areas. All probes easily insert into automotive connectors. The kit is supplied in a durable, plastic storage case.    

Get Info Now

Low Amp Current Probe No. 80i-110

Product From Fluke Corporation

Accurate current measurements become more and more critical when troubleshooting electronic, and automotive circuits. The Fluke Low Amp Current Probe, No. 80i-110, is an AC/DC Current Probe designed to provide safe, high accuracy measurements for a wide range of applications. The specially designed built in safety features such as the 600 V rms rating at the input jaws, output cable, and banana jacks enhance work safety in automotive shop environments. The probe is shielded for high noise immunity, to prevent unwanted noise when troubleshooting around noise generating devices like ignition systems.

Get Info Now

Video Scope Kit, No. VS-55H

Product From Ansed Diagnostic Solutions

Ansed’s Video Scope Kit, No. VS-55H, allows for viewing automotive components in remote locations. The kit contains a Hyperion Technology 5.5mm x 1m probe, 110 degree mirror, 39” long AV cable, 39” long USB cable , 4GB SD card, four AA batteries and a plastic carrying case. The video monitor features a shock-resistant 3.5” glass screen with a compact design. Ansed probes come IP67-rated for dust and fluid, resistant to all fluids including water, coolants, oils, brake fluid and transmission fluid.

Get Info Now

AnsedVideo Scope Probe Adaptor, No. ADPTR

Product From Ansed Diagnostic Solutions

Ansed's Video Scope Probe Adaptor, No. ADPTR, allows Ansed probes to be used with Snap-on BK5500, BK5500A, BK5500W and BK6000 series analog video scopes. The adapter features a multi pin/threaded side of adaptor which connects to all Ansed probes as well. The adaptors include connections with locating markings for proper and easy connection.

Get Info Now

3.9mm Front and Side View Probe, Nos. 39FV and 39SV

Product From Ansed Diagnostic Solutions

The Ansed 3.9mm Front and Side View Probe, Nos. 39FV and 39SV, allows for viewability with a borescope in the hardest to reach spots. It features an LED, multi-pin connector with threaded screw collar, 1m length and the smallest diameter probes currently available, according to the company. The probe comes designed for diesel engine, transmission, door, window frame, sunroof drain and other narrow access applications.

Get Info Now

4.9mm Dual Camera Front and Side View Probe, No. 49SW

Product From Ansed Diagnostic Solutions

Ansed's 4.9mm Dual Camera Probe, No. P/N 49SW, improves the field of vision on a borescope. The accessory features a 110 degree field of front and side view, optional screw-on or slip-on 90 degree mirrors, single button controller to switch from front to side view, LED, multi pin connector with threaded screw collar, and 1m length. 

Get Info Now

Tel/Com 205 Signal Detector

Product From Santronics Inc.

The Santronic Tel/Com 205 Signal Detector is a non-contact tool that detects signals by putting the tool in close proximity to the working cable pair that carries the service.  Thus, giving technicians warning that there is existing service on that cable pair.  The Tel/Com 205 enables the technician to eliminate lost calls, lost data and customer dissatisfaction from service interruption.

Get Info Now