Extended Nose Clamps, Nos. CL0690 and CL0690S

Extended Nose Clamps, Nos. CL0690 and CL0690S

Extended Nose Clamps, Nos. CL0690 and CL0690S Product Image

The Porter-Ferguson Extended Nose Clamps, Nos. CL0690 and CL0690SP, feature a cross-hatch teeth design with greater depth for additional gripping power, and a swiveling pull ring to minimize chain twist. The CL0690SP is fitted with the 3-ton capacity CL0198 Side Pull Adapter. Both clamps have a 1-1/4" wide by 27/32" deep (32mm by 21mm) gripping surface with a minimum throat clearance of 9/32" (7mm), both are 8" (203mm) long and weigh 2-3/8 lbs. The CL0199SH Slide Hammer Pull Adapter option has 3/4–14 threads to accommodate most professional quality slide hammers. Both clamps are spring-loaded and made in U.S.A.

Expand for more details on this Product

Door Latch Release Tool, No. 34920

Product From Lisle Corporation

The Lisle Door Latch Release Tool, No. 34920, is used to release the cable from the handle assembly so that a vehicle's door panel can be removed. This tool is designed to work on 2007-2013 Chevy and GMC pickups, Suburban, Tahoe, Avalanche and Yukon vehicles. This release tool weighs 2 oz. To use, release the panel from the vehicle door. Pull the panel away from the door and locate the handle assembly. Slip the tool end around the cable. Press the tool over the connector to compress tabs and release the connector from the housing. The cable end can then be removed from the handle pull. 

Get Info Now

LT276 Self Locking Door Wedge

Product From Lock Technology, Inc. (LTI Tools)

Wedges today, especially plastic ones, have a tendency to slide out during use. The Lock Technology LT276 Self Locking Door Wedge has a wash board/wave ripple surface to it.  This allows easy entry between the door and rubber strip. The rippled wave-like surface securely locks the wedge in place making it almost impossible to slide out. This tool makes a g

Get Info Now

Line of MIG Pulse Welders

Product From Car-O-Liner Company

The Car-O-Liner Line of MIG Pulse Welders includes three welders which can be used to repair the 2015 F-150. The CMI300II MIG/MAG Pulse Welder was developed for modern car body work including a variety of steels, aluminum and MIG brazing. The

Get Info Now

Ultra QuietForce Air Gun with Fan Nozzle No. U74FA

Product From Guardair Corporation

The Guardair Ultra QuietForce Air Gun with Fan Nozzle, No. U74FA, was specifically designed for when low noise matters. Operating the air gun with a typical 80 psig inlet pressure produces 77 dBA, consumes 22 scfm of air and generates 1.4 lbsf of output thrust -- making this gun low noise without compromising high performance. It incorporates an ergonomic design and is constructed of die-cast aluminum.  The handle features an advanced composite, rubber grip, full-length trigger, and 3/8” FNPT inlet (1/4” FNPT also available with classic+ handle style). This air gun meets OSHA standards, is made in the U.S.A., and is ideal for the toughest cleaning jobs in the shop. In body shops specifically, the air guns are used to blow off automotive parts, such as a hood, after they have been sanded and prepped before painting.

Get Info Now

Thunderbolt Specifications

Product From Chief Automotive Technologies

Chief Automotive Technologies Thunderbolt specs include comprehensive frame and upper body measurements for thousands of cars and trucks, offering collision repair shops a single, easy-to-use resource for accurate repairs. Thunderbolt specs include measurements for window and door openings, tailgates, hoods, engine compartments, trunks and rear hatches, body openings and body widths. Pre-release vehicle data is added continually and updated daily for those who order the online version. 

Get Info Now

LaserLock Live Mapping System

Product From Chief Automotive Technologies

The Chief Automotive Technologies LaserLock Live Mapping System is the next evolution in computerized collision repair measuring. It includes a laser scanner with out-of-level measuring capabilities; 45 targets with a wide range of attachments; a lockable, portable workstation equipped with dual flat screen monitors and color printer; and exclusive Chief software. LaserLock measures up to 45 individual points on a vehicle simultaneously in real-time, so collision repair technicians can monitor dimensional changes as they occur during pulling. As a result, there is no need to recalibrate after every pull and the risk of putting additional damage into a vehicle is reduced. LaserLock’s out-of-level measuring capabilities make it a perfect choice for the estimating bay, where it can be used with a two-post lift to measure every vehicle, uncover hidden damage and write better estimates, resulting in improved cycle times.

Get Info Now

14.4V MicroLithium Cordless Ratchets, Nos. CTR725 & CTR761

Product From Snap-on Inc.

The Snap-on  1/4" Drive 14.4V MicroLithium Cordless Ratchet (No. CTR725) and 3/8" Drive 14.4V MicroLithium Cordless Ratchet (No. CTR761) have the perfect balance of speed, power and size and can easily withstand 150 ft/lbs of manual breakaway torque while delivering rotational speeds of up to 350 rpm to remove and install bolts quickly. With a cold-forged crankshaft for quality, strength and durability, they include a 14.4V

Get Info Now

Uni-Vac dent puller, No. DTK-7700

Product From H & S Autoshot

The H & S Autoshot Uni-Vac, No. DTK-7700, is a dent puller for professional use. Because of the self-contained vacuum feature, no air lines are required and it can be used anywhere inside or outside. The Uni-Vac works on steel or aluminum panels, as well as bumpers. It comes in a durable storage case with vacuum cups in three different sizes.

Get Info Now

Super Easy Wedge, No. 32923

Product From Steck Manufacturing

The Steck Super Easy Wedge, No. 32923, is a larger version of the Easy Wedge to be used as an accessory with Steck's BigEasy Lockout kits. The Super Easy Wedge inserts to create a controlled opening of the vehicle door. The bigger wedge can provide more power as well as a bigger opening to be able to maneuver the BigEasy lockout tool. The Super Easy Wedge is a 7" by 9” inflatable wedge made from ballistic nylon to prevent slippage in extreme weather. The Super Easy Wedge has a contact area of 2-1/2" by 4-1/2" giving the wedge 168.75 pounds of force and it is made in the U.S.A.

Get Info Now

Aluspot Deluxe Aluminum Repair Station, No. DF-900DX

Product From Dent Fix Equipment

The Dent Fix Aluspot Deluxe Aluminum Repair Station, No. DF-900DX, is a complete aluminum repair station, which allows shops to start working on highly profitable aluminum repairs. The five steps for aluminum repair are covered by the tools included in this set: Expose the bare aluminum, apply heat, weld pins, pull the dent and shape the dent. Unique features to this system include the locking doors and dust cover that ensures the tools are isolated from outside contaminants. The Aluspot includes a five-year warranty and is made in the U.S.A.

Get Info Now