The Freightliner S2G LPG Commercial Chassis is equipped with interlock wiring and body builder interface connections, eliminating the need for OEMs to splice into chassis wiring, and clean frame rails for easy body installation. The chassis also includes an 8.0L LPG engine rated at 325hp and 450 ft/lbs of torque, a 9,000-lb capacity taperleaf front suspension and a 12,500-lb capacity 52" variable-rate, multi-leaf spring rear suspension and a low-effort, easy-tilt hood with a dampening device to minimize rapid closure. This has a factory-installed fuel system, and the engine assembly and fuel system are certified for use up to 33,000-lb GVWR.
S2G LPG Commercial Chassis
From Freightliner Trucks
- Product From Willison Products
The Willison Products FUPRO (Fuel Protection) Diesel Fuel Filtration System is designed to detect and prevent water from entering the fuel injection system while purifying the fuel with a two micron filter. A water separator with a clear bowl shows any water present. An in-cab gauge, which monitors the change in either pressure or vacuum in the fuel system, indicates when it is time to change the fuel filter or drain the water. This system is biodiesel compatible, stops filter clog problems and prevents engine damage from contaminants. Made in the U.S.A.
- Product From Rotary Lift
The Rotary Lift Mobile Wheel Lift, No. MW-500, can remove and position any wheel or tire weighing up to 500 lbs, making it easier and more ergonomic for technicians to work on heavy duty trucks, buses and construction equipment. The air-powered lift comes with an air hose and features an additional air tool connection on the colum. A single lever is used to raise and lower the lift, which has a six-second raise time.
- Product From Kiene Diesel Accessories, Inc.
The Kiene Diesel CC2066 DPF Adapter Kit is an adapter for the company's multi-functional Clutch Caddy. The CC2066 DPF kit includes a support tray, a matched set of ballistic nylon JackSacks and a 2” Load Hugger Safety Strap to secure the load. The adapter safely handles DPF units of all shapes and sizes. The Caddy now has 16 adapters, which makes this tool an extremely versatile lifting, holding and positioning, safety tool.
- Product From Ridewell Corporation
The Ridewell Steerable Auxiliary Lift Axle Suspension System, No. RSS-233, includes a compact mounting envelope and an easy-mount adjustable-hanger system. RSS-233 suspensions are manufactured with a dual-draw key kingpin design to extend kingpin life and fully-cast axle ends for increased strength and durability. Additional features include 7" to 18" ride heights, a 13,200-lb capacity, a pre-plumbed air tank option, polyurethane pivot bushings, 1'' and 2'' spacer kit options and control arms angled for lateral stability. The RSS-233 ships fully-assembled for efficient installation.
- Product From Talbert Manufacturing Inc.
Talbert Manufacturing's 6-Axle Steer Dolly offers versatility, additional steering control and extra capacity to handle self-supporting superloads for a variety of industries. The 60-ton dolly can be used for heavy, low-riding materials, such as bridge beams and steel girders, to tower sections for wind energy development. The unit comprises two groups of three axles with the axles in each group spaced at 60". With a bunk between the two groups that is connected to the rear-axle bearings through a tie rod system, the total spread is 16' 1". This configuration allows operators to carry more weight and complies with federal bridge
- Product From Betts Spring Company
BettsHD's Total Installation Kits (TIK) for its most popular fenders works on several single axle, half and full tandem axle applications. The kit includes two fenders with vibration absorbing rubber insulators to prolong product life, along with all brackets and hardware necessary to complete installation. Unlike competitive offerings, all BettsHD fenders include mating material hardware designed to reduce corrosion. These popular kits are available in stainless steel, galvanized, aluminum and poly, all supported by a limited lifetime warranty.
- Product From Watson & Chalin Mfg Inc
SELF-STEERING AXLE & SUSPENSION SYSTEM
5 Year Warranty
Maintenance Free with
13,200 lb. Capacity
INTEGRATED SUSPENSION AND AXLE ASSEMBLY
- Axle Travel: 13.5 in.
- Axle Lift: 10.5 in.
- Product From Porter-Ferguson/Lowell Corp.
Porter-Ferguson's hydraulic rams can generate instant power in any position. Built for maximum flexibility and trouble-free operation, the product group comprises three lines: Speed-Midget Standard Duty Rams, Pull Rams and Hydro Chief Heavy Duty Rams. All products feature quick disconnect couplings to get them into service faster. All have special U-cup packings for longer life, better sealing and easy, speedy repair. Made from tool steel to stand up to tough usage. The SM0100 spreader jack can be used with all Speed Midget jacks to open up confined areas for easy finishing. Include a lifetime warranty.
- Product From Meritor Inc.
Meritor's MTA25 low-mount and MTA30 low-mount trailer suspensions can optimize performance and weight and be used for vocational applications like single-drop flatbed, double-drop flatbed, loggers and chip hauler trailers. The top-mount MTA25 (25,000-pound capacity) and the top mount MTA30 (30,000-pound capacity) come available with the optional lift kit – a system that efficiently raises select axles, improving maneuverability and extending tire life. Available in painted or galvanized finishes, the lift kit attaches easily and can be installed as original equipment (OE) or field retrofitted.
- Product From AGS Company
The AGS Company HFK-2 5-pc Hexforce Wrap-Around Wrench Set features a unique pivot/hinge/clamp action for 360-degree contact. This tool will not slip off, even the most damaged hex surface. With socket-like gripping on captive fittings, these tools attach to standard 1/2” or 3/8” ratchet drive. This set contains the following wrench sizes: 15/16" (23-24mm), 13/16"-7/8" (21-22mm), 3/4" (19-20mm), 11/16" (17-18mm) and 5/8" (16mm). Perfect for the professional installer working on chassis, suspension, alignment, front-end, air conditioning and tube nut applications.