Professional Super Single Axle Drain Pan No. 30600

Professional Super Single Axle Drain Pan No. 30600

Professional Super Single Axle Drain Pan No. 30600 Product Image

The Ken-Tool 30600 Professional Super Single Axle Drain Pan solves a problem of gear oil and grease drips and leaks on wheels and tires, and shop floors when servicing the drive and non-driven axles on trucks and trailers.

Manufactured in the U.S.A. from lightweight, high density polyurethane (HDPE), the axle drain pan can be securely attached to the wheel using two or three lug studs with finger-tightened nuts. The pan is contoured to rest flat with the sides gripping the wheel's drop-center. The pan fits most 22.5" and 24.5", 10-hole hub or stud-piloted steel or aluminum Super Single and dual wheels.

The pan features a pair of self-draining shelves to conveniently place hub covers, bearings, retainers, seals and hub or axle nuts. The high capacity pan (124 fl. oz. /3.66L) features two drip-proof drain spouts for easy waste disposal. The HDPE plastic resists heat and warping, and deep sides and flat bottom prevent accidental spills on the floor or a work bench.

The Ken-Tool Professional Super Single Axle Drain Pan is designed for workplace safety. The highly visible bright orange color helps technicians avoid spilling a pan attached to the axle or sitting the floor, and the tip-resistant design helps keep shop floors slip-free. Additionally, the bright orange color makes it easier to spot oil contaminants and parts when draining the axle.

Expand for more details on this Product

Tire Service Hammer

Product From OTC, Bosch Automotive Service Solutions

The OTC Tire Service Hammer is designed with unique tire and wheel service features — a bead breaking wedge, a top hook and a sledge edge.The convex-shaped bead breaking wedge penetrates the tire bead effectively, and a top hook can be used as a wheel tipper. A sledge end features a hook to drag the tire into position. 

Get Info Now

Hydraulic Hub Grappler Kit, No. 6575-3

Product From OTC, Bosch Automotive Service Solutions

The OTC Hydraulic Hub Grappler Kit, No. 6575-3, combines OTC’s patented Hub Grappler with a hydraulic drive, speeding up wheel bearing and hub service. Quick adjust jaws eliminate the need for fasteners while removing wheel hubs, speeding up the process. Use of hydraulics versus a pneumatic impact wrench means pulling hubs in seconds rather than minutes, with a hydraulic pump actuating a 9-ton ram. 

Get Info Now

Brake Caliper Pin/Bolt Remover Set No. 7302

Product From OTC, Bosch Automotive Service Solutions

The OTC Brake Caliper Pin/Bolt Remover Set, No. 7302, quickly removes seized, frozen or troublesome brake caliper bolts without damage. The kit and design, exclusive to OTC, includes a striking version and air hammer adapter, allowing a technician to strike the pin without damage to surrounding vehicle components. 

Get Info Now

Pneumatic Brake Pin and Bushing Driver Kits, Nos. A1166 and A954

Product From Ajax Tool Works Inc.

The Ajax Tools Pneumatic Brake Pin and Bushing Driver Kits, Nos. A1166 and A954, are used to remove anchor pins and install bushings on trucks, trailers and buses between 16,000 and 30,000 lbs. These kits eliminate the need to heat seized pins and bushings during the removal process and reduce removal and installation time by 60 to 70 percent. The A166 is a .401 shake brake pin bushing driver set that consists of one A1114 and A1115, and the A954 is a .498 set that includes one A956 and A957.  The overall lengh of drivers is 10-1/4”.

Get Info Now

Emergency Parking Brake Tool No. BT20

Product From Snap-on Inc.

Service technicians can save an average of 20 minutes on brake jobs when using the Snap-on Emergency Parking Brake Tool, No. BT20, on rear parking brake springs found on  many  Toyota  vehicles. The  brake  shoes  need  to  be  removed  when  doing  a complete brake job and this can be a challenging task on model year 2000 through current Tacoma, Tundra,

Get Info Now

Wheel Hub Grinder Type 1

Product From Mueller-Kueps LP

The Mueller Kueps Wheel Hub Grinder Type 1 includes a special grinder for cleaning the wheel centering device as well as the attachment area between wheel and hub. This tool allows technicians to completely remove burned-in corrosion residues in a quick and easy process. Actual process time per hub only takes about 3-25 seconds, depending on residue thickness.

Get Info Now

Extra Long Air Hammer Pneumatic Drifts No. 11600

Product From SP Tools/Schley Products Inc.

The unique design of the SP Tools Extra Long Air Hammer Pneumatic Drifts, No. 11600, allows users to remove long bolts that have become frozen in place due to rust and time, including shock bolts and suspension arm bolts. These bolts are often too long for conventional pin punches or tapered drifts to push the bolt through a rusty bushing sleeve. 

Get Info Now

Premium Fiberglass Truck Wheel Weight Hammer

Product From Ascot Supply Co.

The Ascot Supply Co. Premium Fiberglass Truck Wheel Weight Hammer allows users to easily remove or install all types of lead, steel and zinc clip-on truck wheel weights and it is made with a fiberglass shaft for a lifetime of use. With comfort and ease of use in mind, the hammer comes with a slip-resistant and durable rubber ergonomic grip that reduces arm strain and fatigue. The wheel weight hammer also comes with new chromoly hooks designed for large truck weights and a longer handle that provides added reach for truck wheels. The extra large striking face of the hammer has a non-marring surface with a protective medium-hard replaceable tip.

Get Info Now

Powerbuilt Self Adjusting Oil Filter Pliers

Product From Alltrade Tools

The Powerbuilt Self Adjusting Oil Filter Pliers, from Alltrade Tools, automatically adjust to the size of the filter to be removed. These pliers allow for single-hand operation, performing three times faster than conventional filter pliers, according to the company. The uniquely designed mechanisms tighten as users turn the tool – the more users turn, the tighter the pliers grip. It is self-adjusting, simple to use and breaks loose stubborn oil filters with ease. The no-slip grip and padded dipped handles provide comfort so users can easily hold the tool. The opening size fits all filters, from 2-1/4” to 4-3/4”, conforming to any style of filter. Layered steel construction and serrated jaws provide greater durability and a tighter gripping force.

Get Info Now

Powerbuilt Billy Club

Product From Alltrade Tools

The Alltrade Tools Powerbuilt Billy Club provides users a simple way to change a tire, or to access the suspension or brakes. With a handle that houses two-piece universal flip sockets and an extension bar, the patent-pending Billy Club fits all common SAE and metric lug sizes. Its versatile design includes a sliding socket driver that moves in both directions, providing added leverage when loosening or tightening a nut. With the socket driver positioned in the middle, it is quick and easy to spin off or spin down loosened lug nuts. Removing and starting lugs has never been faster and easier.

Get Info Now