Video Scope Kit, No. VS-55H

Video Scope Kit, No. VS-55H

Video Scope Kit, No. VS-55H Product Image

Ansed’s Video Scope Kit, No. VS-55H, allows for viewing automotive components in remote locations. The kit contains a Hyperion Technology 5.5mm x 1m probe, 110 degree mirror, 39” long AV cable, 39” long USB cable , 4GB SD card, four AA batteries and a plastic carrying case. The video monitor features a shock-resistant 3.5” glass screen with a compact design. Ansed probes come IP67-rated for dust and fluid, resistant to all fluids including water, coolants, oils, brake fluid and transmission fluid.

Expand for more details on this Product

Flexible DMM Test Accessory Kit, No. 3604

Product From E-Z-Hook

The E-Z-Hook Flexible DMM Test Accessory Kit, No. 3604, is a comprehensive test kit that includes a variety of connectors including alligator clips, probes and insulation piercing test hooks. The kit includes five different test leads of various lengths. The connectors and test leads are designed to work with most industry standard digital multimeters. The kit variety provides a choice of test connectors that can easily be interchanged depending on the requirement. The insulation piercing XEL test hook has recently been redesigned with shrouded banana sockets on both sides of the handle, allowing for greater flexibility in the field.

Get Info Now

Micro 64 square probes

Product From Jumperkits

The Jumperkits Micro 64 square probes can be used for various applications including automotive, commercial vehicles, engine-management systems, powertrain-control systems, ABS systems and airbag systems. These Micro 64 probes are available in packs of three male and three female probes. The male pin measures 0.64mm. These probes fit terminals found in the various models of Buick, Cadillac, Chevrolet, GMC and Pontiac vehicles.

Get Info Now

Powerbuilt Digital Inspection Videoscope, No. 941199

Product From Alltrade Tools

The Alltrade Tools Powerbuilt Digital Inspection Videoscope, No. 941199, has a 36"-long flexible, wide-angle camera shaft that can snake into an opening 11/32" in diameter. Users have the ability to view and rotate the 2.4" color LCD display, and the ability to brighten or darken the picture for easier viewing. The videoscope comes with an attachable hook, magnet and mirror for versatility. A d

Get Info Now

Powerbuilt Digital Inspection Videoscope, No. 941199

Product From Alltrade Tools

The Powerbuilt Digital Inspection Videoscope, No. 941199 from Alltrade Tools has a 36" long flexible wide angle camera shaft that can snake into an opening as small as 11/32" in diameter. The user can view what's inside on a 2.4" color LCD display. The user can rotate the image and brighten or darken the picture for easier viewing. The tool comes with an attachable hook, magnet and mirror for even more versatility.

Get Info Now

Snap-on Vantage PRO

Product From Snap-on Diagnostics

The Vantage PRO system from Snap-on provides unparalleled component diagnostics with a high-speed scope, graphing multimeter and exclusive Fast-Track Guided Component Tests. Technicians can get the answers they need for confident diagnosis including guided connection, component operations, over 2 million test procedures and over 8 million samples per second of continuous streaming data. Compare live readings with known-good data on over 45,000 unique vehicle models.

Get Info Now

Test Leads with Screw-off Aligator Clips, No. 629

Product From Electronic Specialties, Inc.

The Electronic Specialties Test Leads with Screw-off Alligator Clips, No. 629, are designed to work with most DMM’s currently in use. Connection to the multimeter is made via industry standard, right-angle shielded banana plugs. The alligator clips screw on and off so that, when desired, the test lead can be clamped permanently to the test point. This frees hands for other tasks, like wiggle testing and other diagnostic troubleshooting. The test leads are 48" and and CATIII 1,000V safety rated. The maximum test current is 10 amps. 

Get Info Now

Heavy Duty Insulation Piercing Test Clips, No. 142-3

Product From Electronic Specialties, Inc.

The Electronic Specialties Heavy Duty Insulation Piercing Test Clips, No. 142-3, are sold as a set of two probes and are designed to work with most DMM/Scope test lead kits currently in use. They will connect to the main test lead in the kit via straight banana plug connection. These probes are designed to pierce wire insulation and tap readings in wires where a direct connection is not possible. After use, special care should be taken to seal the point where the wire was pierced.These probes feature CATIII 1000V safety rating. The maximum test current is 5 amps.

Get Info Now

20-Piece Back Probe Kit, No. 23500

Product From S & G Tool Aid Corp.

The S & G Tool Aid Corp. 20-Piece Back Probe Kit, No.23500, is used to back probe harness connectors, fuel injectors and automotive sensors. The stainless steel probes come in straight, 45-degree and 90-degree profiles in 0.027" and 0.040" diameters. The probes are color-coded for easy identification and are compatible with the standard 4mm plug. Also included with the kit are 12" extension leads, color-coded the same as the back probes for use in recessed areas. All probes easily insert into automotive connectors. The kit is supplied in a durable, plastic storage case.    

Get Info Now

PicoScope No. 4423

Product From Pico Technology

The PicoScope 4423 oscilloscope from Pico Technology saves time and money by making it easier and quicker to diagnose faults. It has two or four channels, up to 80 MS/s real-time sample rate, up to 20 MHz bandwidth, 32,000,000 sample memory, 100V maximum input, and requires no power supply. The USB 2.0 connection provides for fast screen updates and protects against overloads and short circuits. It is CAN bus and FlexRay compatible.

Get Info Now

Low Amp Current Probe No. 80i-110

Product From Fluke Corporation

Accurate current measurements become more and more critical when troubleshooting electronic, and automotive circuits. The Fluke Low Amp Current Probe, No. 80i-110, is an AC/DC Current Probe designed to provide safe, high accuracy measurements for a wide range of applications. The specially designed built in safety features such as the 600 V rms rating at the input jaws, output cable, and banana jacks enhance work safety in automotive shop environments. The probe is shielded for high noise immunity, to prevent unwanted noise when troubleshooting around noise generating devices like ignition systems.

Get Info Now