3/8" Drive Shallow Countersink Inverted Torx Sockets, Nos. FLCE140, FLCE160 and FLCE180

3/8" Drive Shallow Countersink Inverted Torx Sockets, Nos. FLCE140, FLCE160 and FLCE180

3/8

Snap-on 3/8" Drive Shallow Countersink Inverted Torx Sockets, Nos. FLCE140, FLCE160 and FLCE180, have a shallow countersink designed for use on shorter Torx fasteners. The FLCE140can be used for connecting rod cap bolts on various Toyotas, while the FLCE160 works on the cam sprocket of a 2.5L FB Subaru engines, plus the camshaft timing gear assembly on various 2012 Toyota vehicles.  The FLCE180 can be used on the spider gear of the rear differential on 2010 to current Chevrolet Camaro vehicles.

Expand for more details on this Product

Pro Non-Slip Impact Sockets

Product From Matco Tools

Matco Tools Pro Non-Slip Impact Sockets are constructed of chrome-molybdenum, and are specially heat-treated to provide continuous impact use. An enhanced 6-point contact design with socket teeth grip the flat sides of the fastener to drive a nut that is up to 70 percent rounded off. These sockets feature easy identification with high visibility laser and impression-stamped size markings. The unique non-slip design protects and works on 6-point, 

Get Info Now

Fuel Pressure Sensor Socket for GM Vehicles, No. A227

Product From Snap-on Inc.

The Snap-on Fuel Pressure Sensor Socket for GM Vehicles, No. A227,  is specifically designed to easily remove GM fuel pressure sensors. Access to these sensors is restricted by the sensor connector and side air intake ports, so technicians often attempt to remove the sensor with pliers, which can easily damage the part. This socket is thin-walled and deeply broached giving technicians the ability to fit the socket over the sensor connector for safe removal. The A227 provides accessibility to areas where a regular 27mm socket does not work. The Fuel Pressure Socket works on a number of 2007-2011 models, including the Cadillac CTS and STS; the Buick Allure, Enclave and LaCrosse; and the Chevrolet Camaro, Cobalt, HHR, Traverse and Acadia.

Get Info Now

Precision Torque Hand and Impact Sockets

Product From Mac Tools

The Mac Tools Precision Torque Hand and Impact Sockets won’t slip on fasteners rounded up to 85 percent, according to the company. The inner geometry of the six-point socket holds nuts and bolts even when they get rounded. Each hand socket is made of chrome vanadium steel and each impact socket is made of chromoly steel to hold up to a lifetime of use. All sets come with a clip rail system, which hold the sockets snug when not in use and allows the user to rotate the socket 360 degrees. This line includes chrome and impact sets featured in 1/4", 3/8" and 1/2" drives.

Get Info Now

1/2" Impact Gun, No. SX231P-2, and 3-pc Thin Wall Socket Set

Product From Sunex Tools

The Sunex 1/2“ Impact Gun, No. SX231P-2, offers a 2" anvil that is reinforced with a specialized hardened alloy, which tested to be superior over industry-leading competitors, according to the company. The twin hammer mechanism produces up to 500 ft/lbs of torque. The reverse-bias technology increases the torque in reverse mode to ensure the removal of lug nuts when using in conjunction with the

Get Info Now

3/8" Drive Semi-Deep Universal Impact Sockets

Product From Grey Pneumatic

Grey Pneumatic offers the 3/8” Drive Semi-Deep Universal Impact Sockets.  The working depth of these universal sockets is approximately halfway between a standard and deep socket, which allows access in hard-to-reach areas. A re-designed chamfered drive means easy attachment to power tool anvils while also protecting them from damage. The sets feature blow mold transfer/storage cases which double as compact toolbox organizers when the cover is removed.  Available in SAE or metric sets, or individually.

Get Info Now

3/4" Drive Socket Boss Twist Lock Socket Tray

Product From Ernst Mfg.

Helping improve storage in the drawer, on the bench, or on the go, the Ernst Mfg. 3/4" Drive Socket Boss Twist Lock Socket Trays fit a large set of tools using a small amount of storage space. Twist-Lock clips on the tray keep sockets secure and prevent tool loss. Socket rails stay locked in the tray for security, and unlock with the push of a button. Individual rails can be removed or switched for customization. Highly customizable, the tray allows users to add or remove socket clips, label socket sizes with ID stickers for labeling socket sizes and easy recognition of missing tools, trade colors and swap out drive sizes. Recommended color options: red for SAE and blue for metric sizes.

Get Info Now

3/8" Shallow Impact Specialty Socket, No. DPFM12

Product From Snap-on Inc.

The Snap-on 3/8” Drive 12mm 10-point Shallow Impact Socket, No. DPFM12, helps technicians complete clutch pressure plate service quicker than ever, according to the company. Designed specifically for use on clutch pressure plate bolts found on the flywheel assembly of Mitsubishi Eclipse and Dodge Stratus vehicles, it makes clutch pressure plate bolts easier to access, remove and install. The tool comes as one of four recently developed 10-point impact sockets, which expands the company’s 6-point and 12-point impact socket offerings.

Get Info Now

1/4" Drive Impact Sockets

Product From SK Hand Tool, LLC

The SK Hand Tool 1/4" Drive Impact Sockets are laser-etched, high visibility for easy readability. Standard, deep and swivel options are available for various applications. These tools are available in 6-point metric sizes for standard and deep lengths, and 6- or 12-point metric and fractional sizes for swivel sockets. Available spearately or in sets, these tools feature a SureGrip Drive design to increase strength and avoid rounding of rusted or damaged fasteners. These tools are coated with a rust-preventative compound for extreme corrosion resistance.

Get Info Now

3/8" Drive Semi-Deep Inmpact Sockets

Product From SK Hand Tool, LLC

The SK Hand Tool 3/8" Drive Semi-Deep Inmpact Sockets are designed to provide additional length to help with hard-to-reach areas.  The nose down design provides even more convenience for hard-to-reach areas.  The SureGrip Drive design drives the side of the fastener, not the corner, to provide increased strength and help avoid rounding of rusted or damaged fasteners. These tools are laser etched, high visibility markings for easy identification. The 1-2/3" long, semi-deep impact sockets provide added reach over standard impact sockets. Available separately or in sets, the 6 point design is also available in both fractional/SAE and metric sizes.

Get Info Now

Mid-Length Sockets

Product From GearWrench/Apex Tool Group

The GearWrench Mid-Length Socket allows users to get access in difficult situations where a deep socket needs to be used, but it cannot fit due to the clearance required. Both the 1/4" drive mid-length sockets and the 3/8" drive mid-length sockets are 0.7" shorter than the equivalent GearWrench deep sockets, giving this extra clearance. The sockets also feature speed angled entry to guide the socket on to the fastener, polished finished, highly visible sizes and units of measurement and high strength to prevent stripping fasteners.

Get Info Now