10 Piece 3/8" Drive 6 Point Swivel Metric Impact Socket Set, No. 33351

10 Piece 3/8" Drive 6 Point Swivel Metric Impact Socket Set, No. 33351

10 Piece 3/8
10 piece set is made in the U.S.A., featuring the SK's High Visibility technology. The sockets are coated with a rust-preventative compound, which makes them exceptionally resistant to corrosive factors. In addition to the rust-preventative coating, the sockets are laser engraved every 120° with extra-large markings for improved readability. All the SK impact sockets feature the SK's SureGrip® hex design, which drives the side of the hex, not the corner. This not only provides increased strength, but also avoids the rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool. Extra recess depth and a 30 degree flex angle allow for improved access. SK's smooth collar design protects the user's hand while in use by preventing the pin from working loose.

 

  • Corrosive resistant and laser engraved every 120°
  • Extra recess depth, 30 degree flex angle and smooth collar design
  • SureGrip® hex design drives the side of the fastener, not the corner
  • Made in the USA
  • Lifetime Warranty

Set Contents:


3/8" Drive Swivel High Visibility Impact Sockets - 10MM, 11MM, 12MM, 13MM, 14MM, 15MM, 16MM, 17MM, 18MM, 19MM

Expand for more details on this Product

1/2" Impact Gun, No. SX231P-2, and 3-pc Thin Wall Socket Set

Product From Sunex Tools

The Sunex 1/2“ Impact Gun, No. SX231P-2, offers a 2" anvil that is reinforced with a specialized hardened alloy, which tested to be superior over industry-leading competitors, according to the company. The twin hammer mechanism produces up to 500 ft/lbs of torque. The reverse-bias technology increases the torque in reverse mode to ensure the removal of lug nuts when using in conjunction with the

Get Info Now

3/8" Shallow Impact Specialty Socket, No. DPFM12

Product From Snap-on Inc.

The Snap-on 3/8” Drive 12mm 10-point Shallow Impact Socket, No. DPFM12, helps technicians complete clutch pressure plate service quicker than ever, according to the company. Designed specifically for use on clutch pressure plate bolts found on the flywheel assembly of Mitsubishi Eclipse and Dodge Stratus vehicles, it makes clutch pressure plate bolts easier to access, remove and install. The tool comes as one of four recently developed 10-point impact sockets, which expands the company’s 6-point and 12-point impact socket offerings.

Get Info Now

28 Piece 1/2" Drive 6 Point Standard and Deep Fractional Impact Socket Set, No. 4051

Product From SK Hand Tool, LLC
28 piece set is made in the U.S.A., featuring the SK's High Visibility technology. The sockets are coated with a rust-preventative compound, which makes them exceptionally resistant to corrosive factors. In addition to the rust-preventative coating, the sockets are laser engraved every 120° with extra-large markings for improved readability. All the SK impact sockets feature the SK's SureGrip® hex design, which drives the side of the hex, not the corner. This not only provides increased strength, but also avoids the rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool. Extra recess depth to allow for use where threaded fasteners protrude above the nut or where the fastener is domed. The nose-down design extends the taper as far as possible, for improved access over straight wall designs.
Get Info Now

17 Piece 1/2" Drive 6-Point Fractional Impact Socket Set, No. 4050

Product From SK Hand Tool, LLC
17 piece, 1/2" Drive, 6 Point Standard and Deep Fractional Impact Socket set is made in the U.S.A., featuring the SK's High Visibility technology. The sockets are coated with a rust-preventative compound, which makes them exceptionally resistant to corrosive factors. In addition to the rust-preventative coating, the sockets are laser engraved every 120° with extra-large markings for improved readability. All the SK impact sockets feature the SK's SureGrip® hex design, which drives the side of the hex, not the corner. This not only provides increased strength, but also avoids the rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool. Extra recess depth to allow for use where threaded fasteners protrude above the nut or where the fastener is domed. The nose-down design extends the taper as far as possible, for improved access over straight wall designs.
Get Info Now

22 Piece 1/2" Drive 6 Point Standard and Deep Metric Impact Socket Set, No. 4052

Product From SK Hand Tool, LLC
22 piece set is made in the U.S.A., featuring the SK's High Visibility technology. The sockets are coated with a rust-preventative compound, which makes them exceptionally resistant to corrosive factors. In addition to the rust-preventative coating, the sockets are laser engraved every 120° with extra-large markings for improved readability. All the SK impact sockets feature the SK's SureGrip® hex design, which drives the side of the hex, not the corner. This not only provides increased strength, but also avoids the rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool. Extra recess depth to allow for use where threaded fasteners protrude above the nut or where the fastener is domed. The nose-down design extends the taper as far as possible, for improved access over straight wall designs.
Get Info Now

30 Piece 1/2" Drive 6 Point Standard and Deep Metric Impact Socket Set, No. 4053

Product From SK Hand Tool, LLC
The SK Hand Tools 30-pc 1/2" Drive 6-point Standard and Metric Deep Impact Socket Set, No. 4053, come coated with a rust-preventative compound, which makes them more resistant to corrosive factors. Each socket has exta-large laser engraved markings every 120 for improved readability. The SK SureGrip hex design drives the side of the hex, not the corner. This not only provides increased strength, but helps avoid rounding of rusted or damaged fasteners which can occur when using a sharp-cornered hex tool, according to the company. Sockets offer extra recess depth to allow for use where threaded fasteners protrude above the nut or when working on domed fasteners. The nose-down design extends the taper as far as possible for improved access over straight wall designs. 
Get Info Now

8 Piece 3/8" Drive 6 Point Swivel Fractional Impact Socket Set, No. 33300

Product From SK Hand Tool, LLC
8 piece set is made in the U.S.A., featuring the SK's High Visibility technology. The sockets are coated with a rust-preventative compound, which makes them exceptionally resistant to corrosive factors. In addition to the rust-preventative coating, the sockets are laser engraved every 120° with extra-large markings for improved readability. All the SK impact sockets feature the SK's SureGrip® hex design, which drives the side of the hex, not the corner. This not only provides increased strength, but also avoids the rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool. Extra recess depth and a 30 degree flex angle allow for improved access. SK's smooth collar design protects the user's hand while in use by preventing the pin from working loose.
Get Info Now

15-pc Stubby Impact Socket Set, No. MA42015M

Product From King Tony America

King Tony America’s Mighty Seven 15-pc Stubby Impact Socket Set, No. MA42015M, helps technicians that need to remove tough fasteners in a tight spot. This short profile These sockets come as a stubby 1-1/8” socket length, with sizes ranging from 10mm to 24mm. The sockets sit in a custom tray that is made of chemical-, oil- and water-resistant EVA foam with clearly marked sizing. Designed to tackle any job of any size, big or small.

Get Info Now

Universal double joint impact swivel sockets, Nos. 13772-P and 14772-P

Product From Ko-ken Tool Co., Ltd.

Koken universal double joint impact swivel sockets, Nos. 13772-P and 14772-P, allow the user to reach into even tighter spots than one regularly can with an impact swivel. This can be accomplished by having the tool "swivel" at two different points. Simply attach any impact socket to the tool and it becomes an impact swivel. Inside the tool a mechanism allows the female drive part and body part to quickly return to a straight position. No. 13772-P works with 3/8" applications and 14772-P with 1/2" applications.

Get Info Now

CP67X3 Series of industrial impact wrenches, Nos. CP6763 and CP6773

Product From Chicago Pneumatic Tool Co.

The Chicago Pneumatic CP67X3 Series of industrial impact wrenches was engineered to withstand industrial maintenance applications. The CP67X3 series offers features including a steel clutch housing, a reliable steel motor, and a durable twin hammer clutch.? The two models, which include the 3/4"

Get Info Now