30 Piece 1/2" Drive 6 Point Standard and Deep Metric Impact Socket Set, No. 4053

30 Piece 1/2" Drive 6 Point Standard and Deep Metric Impact Socket Set, No. 4053

30 Piece 1/2
The SK Hand Tools 30-pc 1/2" Drive 6-point Standard and Metric Deep Impact Socket Set, No. 4053, come coated with a rust-preventative compound, which makes them more resistant to corrosive factors. Each socket has exta-large laser engraved markings every 120 for improved readability. The SK SureGrip hex design drives the side of the hex, not the corner. This not only provides increased strength, but helps avoid rounding of rusted or damaged fasteners which can occur when using a sharp-cornered hex tool, according to the company. Sockets offer extra recess depth to allow for use where threaded fasteners protrude above the nut or when working on domed fasteners. The nose-down design extends the taper as far as possible for improved access over straight wall designs. 

Expand for more details on this Product

1/2" Impact Gun, No. SX231P-2, and 3-pc Thin Wall Socket Set

Product From Sunex Tools

The Sunex 1/2“ Impact Gun, No. SX231P-2, offers a 2" anvil that is reinforced with a specialized hardened alloy, which tested to be superior over industry-leading competitors, according to the company. The twin hammer mechanism produces up to 500 ft/lbs of torque. The reverse-bias technology increases the torque in reverse mode to ensure the removal of lug nuts when using in conjunction with the

Get Info Now

3/8" Shallow Impact Specialty Socket, No. DPFM12

Product From Snap-on Inc.

The Snap-on 3/8” Drive 12mm 10-point Shallow Impact Socket, No. DPFM12, helps technicians complete clutch pressure plate service quicker than ever, according to the company. Designed specifically for use on clutch pressure plate bolts found on the flywheel assembly of Mitsubishi Eclipse and Dodge Stratus vehicles, it makes clutch pressure plate bolts easier to access, remove and install. The tool comes as one of four recently developed 10-point impact sockets, which expands the company’s 6-point and 12-point impact socket offerings.

Get Info Now

28 Piece 1/2" Drive 6 Point Standard and Deep Fractional Impact Socket Set, No. 4051

Product From SK Hand Tool, LLC
28 piece set is made in the U.S.A., featuring the SK's High Visibility technology. The sockets are coated with a rust-preventative compound, which makes them exceptionally resistant to corrosive factors. In addition to the rust-preventative coating, the sockets are laser engraved every 120° with extra-large markings for improved readability. All the SK impact sockets feature the SK's SureGrip® hex design, which drives the side of the hex, not the corner. This not only provides increased strength, but also avoids the rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool. Extra recess depth to allow for use where threaded fasteners protrude above the nut or where the fastener is domed. The nose-down design extends the taper as far as possible, for improved access over straight wall designs.
Get Info Now

17 Piece 1/2" Drive 6-Point Fractional Impact Socket Set, No. 4050

Product From SK Hand Tool, LLC
17 piece, 1/2" Drive, 6 Point Standard and Deep Fractional Impact Socket set is made in the U.S.A., featuring the SK's High Visibility technology. The sockets are coated with a rust-preventative compound, which makes them exceptionally resistant to corrosive factors. In addition to the rust-preventative coating, the sockets are laser engraved every 120° with extra-large markings for improved readability. All the SK impact sockets feature the SK's SureGrip® hex design, which drives the side of the hex, not the corner. This not only provides increased strength, but also avoids the rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool. Extra recess depth to allow for use where threaded fasteners protrude above the nut or where the fastener is domed. The nose-down design extends the taper as far as possible, for improved access over straight wall designs.
Get Info Now

22 Piece 1/2" Drive 6 Point Standard and Deep Metric Impact Socket Set, No. 4052

Product From SK Hand Tool, LLC
22 piece set is made in the U.S.A., featuring the SK's High Visibility technology. The sockets are coated with a rust-preventative compound, which makes them exceptionally resistant to corrosive factors. In addition to the rust-preventative coating, the sockets are laser engraved every 120° with extra-large markings for improved readability. All the SK impact sockets feature the SK's SureGrip® hex design, which drives the side of the hex, not the corner. This not only provides increased strength, but also avoids the rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool. Extra recess depth to allow for use where threaded fasteners protrude above the nut or where the fastener is domed. The nose-down design extends the taper as far as possible, for improved access over straight wall designs.
Get Info Now

8 Piece 3/8" Drive 6 Point Swivel Fractional Impact Socket Set, No. 33300

Product From SK Hand Tool, LLC
8 piece set is made in the U.S.A., featuring the SK's High Visibility technology. The sockets are coated with a rust-preventative compound, which makes them exceptionally resistant to corrosive factors. In addition to the rust-preventative coating, the sockets are laser engraved every 120° with extra-large markings for improved readability. All the SK impact sockets feature the SK's SureGrip® hex design, which drives the side of the hex, not the corner. This not only provides increased strength, but also avoids the rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool. Extra recess depth and a 30 degree flex angle allow for improved access. SK's smooth collar design protects the user's hand while in use by preventing the pin from working loose.
Get Info Now

10 Piece 3/8" Drive 6 Point Swivel Metric Impact Socket Set, No. 33351

Product From SK Hand Tool, LLC
10 piece set is made in the U.S.A., featuring the SK's High Visibility technology. The sockets are coated with a rust-preventative compound, which makes them exceptionally resistant to corrosive factors. In addition to the rust-preventative coating, the sockets are laser engraved every 120° with extra-large markings for improved readability. All the SK impact sockets feature the SK's SureGrip® hex design, which drives the side of the hex, not the corner. This not only provides increased strength, but also avoids the rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool. Extra recess depth and a 30 degree flex angle allow for improved access. SK's smooth collar design protects the user's hand while in use by preventing the pin from working loose.
Get Info Now

15-pc Stubby Impact Socket Set, No. MA42015M

Product From King Tony America

King Tony America’s Mighty Seven 15-pc Stubby Impact Socket Set, No. MA42015M, helps technicians that need to remove tough fasteners in a tight spot. This short profile These sockets come as a stubby 1-1/8” socket length, with sizes ranging from 10mm to 24mm. The sockets sit in a custom tray that is made of chemical-, oil- and water-resistant EVA foam with clearly marked sizing. Designed to tackle any job of any size, big or small.

Get Info Now

Universal double joint impact swivel sockets, Nos. 13772-P and 14772-P

Product From Ko-ken Tool Co., Ltd.

Koken universal double joint impact swivel sockets, Nos. 13772-P and 14772-P, allow the user to reach into even tighter spots than one regularly can with an impact swivel. This can be accomplished by having the tool "swivel" at two different points. Simply attach any impact socket to the tool and it becomes an impact swivel. Inside the tool a mechanism allows the female drive part and body part to quickly return to a straight position. No. 13772-P works with 3/8" applications and 14772-P with 1/2" applications.

Get Info Now

TPMS Torque Tools

Product From Dill Air Controls

The Dill TPMS Torque Tools are designed to easily install the hex nut on the valve stem. The torque values are preset, eliminating the need to adjust a torque wrench before and after install. Using the Torque Tools will save technicians time and minimize the chance of an error during the installation process. Dill 4065 contains two preset Torque Tools and is a stand-alone kit for the shop that already has a basic TPMS installation toolkit. The Torque Tools are also available in Dill’s updated Master TPMS Toolkit (8200) that includes all the components to service most sensors and service kits on the road today.

Get Info Now