Smart Splice Ultimate Line Repair Kit

Smart Splice Ultimate Line Repair Kit

Smart Splice Ultimate Line Repair Kit Product Image

The Airsept Smart Splice Ultimate Line Repair Kit helps techs build or repair metal lines, connect tubing to rubber hose, block-off a line and add an A/C service port. The kit includes AirSept’s Line Splice, Tube-to-Hose Connector, Line Terminator and Inline Service “T”, all based on AirSept’s innovative Line Splice technology. The technology features a “supersized” seal sleeve and unique self-adjusting, anti-vibration tension ring that together offer superior sealing capabilities over traditional compression fittings, says the company. OE-fit threaded or quick-connect fittings allow five-minute installation, often on-vehicle. The kit includes straight, 45-degree and 90-degree fittings; metric (8mm to 16mm) and SAE (5/16” to 3/4" O.D.) kits; 6, 8, 10, and 12 hoses; aluminum tube inserts (8mm to 16mm); and a handheld crimper. 

 

Expand for more details on this Product

Coil-On-Plug Spark Tester, No. 20700

Product From Lisle Corporation

The Lisle Coil-On-Plug Spark Tester, No. 20700, provides an easy way to check ignition systems with coil-on plugs. This tool offers the quickest way to test for no-start conditions, according to the company. High-visibility white lettering makes it easy to read the gap measurement from 0 to 40k, the round knob provides easy gap adjustment and the 12" ground wire comes with a shielded clip. Applications include Ford, Chrysler, Mitsubishi, Nissan and more. The standard plug wire tip can be unscrewed so the tester can be used on small engines and some motorcycles.

Get Info Now

TH513 Delphi Jumper Wire and Circuit Replacement Kit

Product From Thexton Manufacturing Company, Inc.

The Thexton TH513 Delphi Jumper Wire and Circuit Replacement Kit is designed to test and replace defective Delphi terminals. This kit includes all of the necessary jumper wires, test leads, terminals, butt splices, terminal release tools and heat shrink to repair most damaged Delphi circuits. If a terminal is deemed defective simply remove the terminal using the correct terminal release tool provided in the kit, cut the defective wire off and splice in a new wire using the parts provided in the kit.

Get Info Now

Pro Non-Slip Impact Sockets

Product From Matco Tools

Matco Tools Pro Non-Slip Impact Sockets are constructed of chrome-molybdenum, and are specially heat-treated to provide continuous impact use. An enhanced 6-point contact design with socket teeth grip the flat sides of the fastener to drive a nut that is up to 70 percent rounded off. These sockets feature easy identification with high visibility laser and impression-stamped size markings. The unique non-slip design protects and works on 6-point, 

Get Info Now

18V 3/8" Cordless Impact Kit No. MCL1838IWK

Product From Matco Tools

The Matco Tools 18V 3/8" Cordless Impact Kit, No. MCL1838IWK, includes an MCL1838IW 18V 3/8" impact wrench, MCL1840LB 4.0Ah 18V Li-ion battery, and MCL1840CHRG 14.4V/18V battery charger (slide type batteries) all within convenient, rugged case. 

Get Info Now

GOLO OBD interface

Product From Launch Tech USA

Launch Tech USA offers real-time remote diagnoses with the GOLO OBD interface. Shops are able to help customers with vehicle driveability issues anywhere, any time. When a customer's 'check engine" light turns on on the road, the customer can use his or her smartphone to call the GOLO OBD interface. The interface triggers the "GOLO" light on the connected technician's scan tool in the shop. The technician has immediate access to his customer's vehicle's systems. The tech can then perform a health-check on the vehicle remotely to confirm if there are any issues, and can turn the "check engine" light off if and when necessary (e.g. a loose gas cap). 

Get Info Now

Digital Battery Tester No. 12-1015

Product From Associated Equipment

The Associated Equipment 12-1015 Handheld Digital Four-in-One Battery Tester, with Thermal Printer and USB Port, provides an electrical system test in less than three minutes. The 12-1015 tests all types of 12V batteries with a range of 100-1,700 including: CCA for measured voltage of battery, battery CCA rating after test, starter test displaying lowest voltage of battery during start, alternator test and vehicle ground testing for intermittent connections in the electrical system.  The 12-1015 provides a cost-effective handheld tester with the ability to print out test results for the customer or shop supervisor.  Test results can also be downloaded to a shop computer for recordkeeping.  The 12-1015 is OE automotive manufacturer tested and approved, and comes with a heavy duty plastic case with impact protection.

Get Info Now

ATEC Cordless Under Hood Work Light No. 12-1017

Product From Associated Equipment

The Associated Equipment 12-1017 ATEC Cordless 6x1 Super Bright SMD LED Light offers the first cordless, rechargeable underhood worklight for the professional technician, says the company.  The 360-degree ratcheting aluminum alloy padded handles/hooks extend from 47" to 75", easily attaching to most vehicle hoods or be used as a standalone under vehicle worklight.  The light provides 400-500 lumens of bright light for up to three three hours of continuous run-time.  Featuring a 7.4V 2200mAh Li-ion rechargeable battery, this worklight allows users the flexibility to use in a situation where no AC power is readily available or where mobility is key for efficient service. OE automotive manufacturer tested and approved.

Get Info Now

MIL6011 Intellamatic 12/24V Smart Charger

Product From Associated Equipment

The Associated Equipment MIL6011 Intellamatic Professional 12/24V 70/35 amp Smart All-Type Battery Charger provides an innovative and multi-purpose solution to the changing vehicle service market. The

Get Info Now

Universal Seal Puller Kit No. 850

Product From Lang Tools

The unique design of the Lang Tools Universal Seal Puller Kit, No. 850, allows the user to have various angles and leverage points to engage and remove a seal. The jaw width will engage a larger surface area than the competition, says the company, 

Get Info Now

LT598 ShockIt Socket Set

Product From Lock Technology, Inc. (LTI Tools)

The Lock Technology LT598 ShockIt Socket Set includes very low-profile sockets to fit over frozen nuts and bolts.  The sockets have a raised flat edge.  Included is a custom offset punch designed to fit the raised edge of the socket, allowing the technician to firmly and securely shock the fastener loose using a hammer.  Available in a 5-pc set with a custom punch and magnetic storage rail, this set includes the following sizes: 

Get Info Now