Kenworth Truck's T680 Mid-Roof Sleeper delivers a big package in a small footprint. The 52" sleeper can be used for regional haul applications where drivers spend two to three nights on the road. Specifying the optional passenger swivel seat further expands the living space, and enables the driver to use both the cab and the sleeper as a comfortable space for relaxation when they're not behind the wheel. The smaller package yields weight savings up to 700 lbs versus the 76". The sleeper features a liftable lower bunk and upper storage units on the sleeper's back wall.
T680 Mid-Roof Sleeper
- Product From Kar Lift Solutions by Omer
The Kar Lift Nautilus heavy duty, low-pressure in-ground lift, from Omer, lifts with 10” (25,000-lb) or 12” (36,000-lb) capacity lifting rams. The “equalized” power unit comes with a remote pendant control. Nautilus is available with chrome-plated cylinders and hot dipped galvanized casings, locking ladders, floor frame and cover plates for the ultimate in environmental protection. Available in retrofit applications of existing installations.
- Product From Hunter Engineering Company
The improved Hunter Engineering Winalign HD Alignment System can now use four or six revolutionary DSP700T heavy duty alignment sensors to provide accurate readings, even for three-axle trucks, in just four minutes. DSP700T sensors use exclusive roll-forward compensation to compensate all sensors at once without the need to jack each axle. DSP700T sensors are cordless and are compensated at the same time by Hunter’s unique pusher. These sensors are accurate to a range of 600" (1,524cm) to cover all truck, bus and trailer lengths. When equipped with the time-saving capabilities of Hunter's optional Fully Integrated Alignment Turnplate Kit (FIA), the system produces full vehicle measurements in as little as four minutes.
- Product From Alliance Scale, Inc.
Alliance Scale's IE Series Crane Scales feature a wireless remote control with a 32' range and function keys for power, zero, tare, and hold. They come offered in 100 lbs to 2,000 lbs capacities that can operate up to 50 hours on a single 9 VDC battery. These portable crane scales have a five-digit LCD display and can operate up to 50 hours on a fully charged 9 VDC battery. Suitable for a wide range of weighing applications, they have a sturdy aluminum die cast case, easy to read 1.1" LCD display. They also included a rugged hook and shackle for hanging.
- Product From Stertil-Koni USA
Stertil-Koni's heavy duty mobile column vehicle lifts, No. ST 1085, delivers a lifting capacity of 18,500 lbs per column and has extra-long adjustable pick-up forks of 14". It can safely raise all types of vehicles, including those with super single tires. In addition, the width between the lifting forks can be adjusted so that vehicles with variable wheel diameters can be lifted safely and easily. It also features a Multi Master System, equipped with a control box on each individual column. In that way, lifting columns can be operated individually, in pairs or a complete set with the touch of a single button.
- Product From Bridgestone Americas Tire Operations
Bridgestone Commercial Solutions' Ecopia tire line, No. R268, designed for regional and pickup and delivery fleets provides tire performance that stands up to high scrub environments while offering fuel efficiency advantages too. With benefits such as high-traction, long wear life, and low rolling resistance, the tire expands options to maximize fleet performance. The tires feature wave channel design, optimized rib distribution (reduced irregular tire wear) and NanoPro-Tech and High Scrub Tread Compound composition. The tirecomes in the size of 295/75R22.5 in the U.S. and Canada.
- Product From Fontaine Trailer Company
Fontaine's Infinity Superior Slide Trailer features independent sliding axles and can be configured as a closed tandem set at the rear, a closed tandem set at the front, a full 10' spread axle, and any combination in between. It gives drivers the ability to change axle settings quickly and easily to accommodate various state regulations. This keeps equipment rolling no matter where it needs to go. It comes constructed of fabricated steel mainbeams and steel crossbracing, aluminum floor and rear skirt, and a RASR routed aluminum side rail.
- Product From ARI-Hetra
ARI-Hetra's Engine Hoist, No. AH09756, places a large emphasis on safety with a 9,000 lb lifting capacity, which can handle most engine sizes. This maximum lifting capacity combined with its collapsible frame helps this tool exceed job performance standards and allow it to be easily stored away when unused. The hoist has a usable, effective and safe design, according to the company.
- Product From Blackmer
Blackmer's TXD Series Sliding Vane Pumps feature the reliability, durability and efficiency that make them suited for use in truck-mounted applications of a wide array of petroleum-based products such as fuel oil, home heating oil, gasoline, kerosene and diesel fuel. Blackmer TXD Series pumps come in 1.5", 2", 2.5", 3" and 4" port sizes with flow rates from 10 to 500 gpm and pressures up to 125 psi. An optional air-operated piston relief valve can be purchased, in addition to T-type strainers to protect the pump from damage caused by foreign material in the piping and tanks for the 2", 2.5" and 3" pumps.
- Product From Kenworth Truck Company
Kenworth's two-piece Aerodynamic Steel Bumper, No. T680, has a rugged, durable design for a higher level of protection in the event of bumper impacts, while retaining the aerodynamics and aesthetics of the Kenworth T680's current standard composite bumper. This bumper can be purchased for both the 3-piece T680 hood at 119" BBC optimized for the PACCAR MX-13 engine and the 3-piece, standard length T680 hood at 125" BBC. It can be ordered painted or chromed.
- Product From Chicago Pneumatic Tool Co.
The Chicago Pneumatic 1" CP7779 impact wrench provides 1440 ft/lbs of maximum torque. Thanks to an optimal balance and interaction between motor and clutch mechanism, this energy-efficient impact has an average air consumption of only 7.7 cfm. The CP7779 offers the convenient, S2S single-hand forward/reverse switch for more efficient operation. In any wrench position, and even in tight places, the operator can easily switch between forward and reverse with one hand. The CP7779 is compact, well-balanced and lightweight. A fiber-reinforced composite body and magnesium clutch housing make it one of the industry’s lightest wrenches weighing only 7.7 lbs. Combined, these features help reduce both arm stress and operator fatigue.