LT1800 4-pc Offset Impact Driver Set

LT1800 4-pc Offset Impact Driver Set

LT1800 4-pc Offset Impact Driver Set Product Image

Frequently techs experience great difficulty removing frozen studs and bolts during strut, break hub, front end, exhaust, spring and suspension repair.The Lock Technology LT1800 4-pc Offset Impact Driver Set are forged with a 15-degree angle at the drive head end. The angle can be increased up to another 30 degrees due to a machined recessed well at the head of the tool. Four machined anti-turning slots at the base of the driver prevent the offset driver from turning during use in the impact chisel. Three sizes of well head available: 0.410", 0.530" and 0.725" reach the most inaccessible of fasteners. Also included is a 0.990” straight shaft non-turning air hammer.

Expand for more details on this Product

Tire Service Hammer

Product From OTC, Bosch Automotive Service Solutions

The OTC Tire Service Hammer is designed with unique tire and wheel service features — a bead breaking wedge, a top hook and a sledge edge.The convex-shaped bead breaking wedge penetrates the tire bead effectively, and a top hook can be used as a wheel tipper. A sledge end features a hook to drag the tire into position. 

Get Info Now

Hydraulic Hub Grappler Kit, No. 6575-3

Product From OTC, Bosch Automotive Service Solutions

The OTC Hydraulic Hub Grappler Kit, No. 6575-3, combines OTC’s patented Hub Grappler with a hydraulic drive, speeding up wheel bearing and hub service. Quick adjust jaws eliminate the need for fasteners while removing wheel hubs, speeding up the process. Use of hydraulics versus a pneumatic impact wrench means pulling hubs in seconds rather than minutes, with a hydraulic pump actuating a 9-ton ram. 

Get Info Now

Brake Caliper Pin/Bolt Remover Set No. 7302

Product From OTC, Bosch Automotive Service Solutions

The OTC Brake Caliper Pin/Bolt Remover Set, No. 7302, quickly removes seized, frozen or troublesome brake caliper bolts without damage. The kit and design, exclusive to OTC, includes a striking version and air hammer adapter, allowing a technician to strike the pin without damage to surrounding vehicle components. 

Get Info Now

Emergency Parking Brake Tool No. BT20

Product From Snap-on Inc.

Service technicians can save an average of 20 minutes on brake jobs when using the Snap-on Emergency Parking Brake Tool, No. BT20, on rear parking brake springs found on  many  Toyota  vehicles. The  brake  shoes  need  to  be  removed  when  doing  a complete brake job and this can be a challenging task on model year 2000 through current Tacoma, Tundra,

Get Info Now

Separator Filter Dryer for pneumatic tools and devices

Product From SKF

The SKF Separator Filter Dryer is an air dryer that provides contaminant-free air to pneumatic devices. Designed to keep compressed air free of oil, contaminants and moisture, the Separator Filter Dryer

Get Info Now

Wheel Hub Grinder Type 1

Product From Mueller-Kueps LP

The Mueller Kueps Wheel Hub Grinder Type 1 includes a special grinder for cleaning the wheel centering device as well as the attachment area between wheel and hub. This tool allows technicians to completely remove burned-in corrosion residues in a quick and easy process. Actual process time per hub only takes about 3-25 seconds, depending on residue thickness.

Get Info Now

Pneumatic Gun Vac with flexible extension

Product From Guardair Corporation

The Guardair Corp. Pneumatic Gun Vac with 18” tapered flexible metal extension is designed for industrial cleaning applications and it produces twice the power of standard shop vacuums, according to the company.The flexible metal extension makes cleaning easy in hard-to-reach areas. Powered by compressed air, the lightweight Flexible Gun Vac has no electric motor to burn out. The high-filtration collection bag makes it ideal for cleaning metal chips, dirt, dust and finer materials such as powders and talc. The tapered vacuum inlet accepts all standard 1-1/4" vacuum accessories. The Gun Vac features a contoured comfort grip and a hanging/storage eyelet.

Get Info Now

1" High Power Flat Air Nozzle

Product From Exair Corporation

The Exair 1" High Power Flat Air Nozzle produces a flat 1" (25mm) wide air stream with a strong blowing force of 9.8 ounces (278g) when mounted 12" (305mm) from the target. The design of this super-efficient nozzle allows it to fit in tight spaces and tight budgets. It allows a precise amount of air through a 0.025" (0.64mm) opening that comes positioned on a stainless steel shim between the body and removable cap. The high-velocity air stream pulls in surrounding room air to produce a wide, forceful stream of laminar airflow. This is available in zinc aluminum alloy construction.

Get Info Now

Extra Long Air Hammer Pneumatic Drifts No. 11600

Product From SP Tools/Schley Products Inc.

The unique design of the SP Tools Extra Long Air Hammer Pneumatic Drifts, No. 11600, allows users to remove long bolts that have become frozen in place due to rust and time, including shock bolts and suspension arm bolts. These bolts are often too long for conventional pin punches or tapered drifts to push the bolt through a rusty bushing sleeve. 

Get Info Now

Premium Fiberglass Truck Wheel Weight Hammer

Product From Ascot Supply Co.

The Ascot Supply Co. Premium Fiberglass Truck Wheel Weight Hammer allows users to easily remove or install all types of lead, steel and zinc clip-on truck wheel weights and it is made with a fiberglass shaft for a lifetime of use. With comfort and ease of use in mind, the hammer comes with a slip-resistant and durable rubber ergonomic grip that reduces arm strain and fatigue. The wheel weight hammer also comes with new chromoly hooks designed for large truck weights and a longer handle that provides added reach for truck wheels. The extra large striking face of the hammer has a non-marring surface with a protective medium-hard replaceable tip.

Get Info Now