EcoClean

EcoClean

EcoClean Product Image

Urethane Supply Company's EcoClean, a zero VOC (volatile organic compound) plastic cleaner, can be used before plastic repairs and refinishing jobs to ensure the best performance from fillers, paints and adhesion promoters. Designed to work as well as solvent-based plastic cleaners when preparing plastic for repair and refinishing work. It's not regulated by use limitations even in tightly controlled VOC regions. Can remove mold release agents and silicones, and safe for use on all plastics. Approved for use in USC Bumper and Cladding Coat Paint and Primer plastic preparation. Made in the USA. 

Expand for more details on this Product

SprayLube 990

Product From Buyers Products Company

The Buyers Products SprayLube 990 is a spray lubricant that penetrates and loosens rust and corrosion on metal-to-metal parts. Formulated with corrosion inhibitors, it protects surfaces as well as lubricates and displaces moisture. SprayLube 990 can be used to lubricate and protecting a variety of parts including pintle hooks, drive train sprockets, door hinges and many others. SprayLube 990 comes in a 15-oz can.

Get Info Now

Door Latch Release Tool, No. 34920

Product From Lisle Corporation

The Lisle Door Latch Release Tool, No. 34920, is used to release the cable from the handle assembly so that a vehicle's door panel can be removed. This tool is designed to work on 2007-2013 Chevy and GMC pickups, Suburban, Tahoe, Avalanche and Yukon vehicles. This release tool weighs 2 oz. To use, release the panel from the vehicle door. Pull the panel away from the door and locate the handle assembly. Slip the tool end around the cable. Press the tool over the connector to compress tabs and release the connector from the housing. The cable end can then be removed from the handle pull. 

Get Info Now

LT276 Self Locking Door Wedge

Product From Lock Technology, Inc. (LTI Tools)

Wedges today, especially plastic ones, have a tendency to slide out during use. The Lock Technology LT276 Self Locking Door Wedge has a wash board/wave ripple surface to it.  This allows easy entry between the door and rubber strip. The rippled wave-like surface securely locks the wedge in place making it almost impossible to slide out. This tool makes a g

Get Info Now

SK Hand Wipes

Product From SK Hand Tool, LLC

SK Hand Wipes clean the toughest automotive grease, grime and dirt on hands and tools, says the company. Use the dual textured wipe to tackle both heavy and light soils. The Polypropylene material also helps the wipe naturally absorbs oils.  The high-performance formula cleans the toughest grease, grime and oils. The large wipe size (9" x 12") cleans large amounts of soils in one use with no greasy residue and no VOCs.

Get Info Now

GDI IVD Intake Valve Cleaner

Product From CRC Industries

The CRC Industries, Inc. GDI IVD Intake Valve Cleaner is designed to remove harmful deposits from all types of gasoline-powered engines. The GDI IVD Intake Valve Cleaner achieves this by delivers COzol directly to the valves at 150 times the concentration of any other premium fuel system additive on the market. Technicians can simply spray past the MAF sensor, through the air intake every 10,000 miles to increase power and torque, stabilize rough idles, solve rough starting problems, reduce emissions and improve fuel economy.

Get Info Now

Line of MIG Pulse Welders

Product From Car-O-Liner Company

The Car-O-Liner Line of MIG Pulse Welders includes three welders which can be used to repair the 2015 F-150. The CMI300II MIG/MAG Pulse Welder was developed for modern car body work including a variety of steels, aluminum and MIG brazing. The

Get Info Now

Ultra QuietForce Air Gun with Fan Nozzle No. U74FA

Product From Guardair Corporation

The Guardair Ultra QuietForce Air Gun with Fan Nozzle, No. U74FA, was specifically designed for when low noise matters. Operating the air gun with a typical 80 psig inlet pressure produces 77 dBA, consumes 22 scfm of air and generates 1.4 lbsf of output thrust -- making this gun low noise without compromising high performance. It incorporates an ergonomic design and is constructed of die-cast aluminum.  The handle features an advanced composite, rubber grip, full-length trigger, and 3/8” FNPT inlet (1/4” FNPT also available with classic+ handle style). This air gun meets OSHA standards, is made in the U.S.A., and is ideal for the toughest cleaning jobs in the shop. In body shops specifically, the air guns are used to blow off automotive parts, such as a hood, after they have been sanded and prepped before painting.

Get Info Now

Thunderbolt Specifications

Product From Chief Automotive Technologies

Chief Automotive Technologies Thunderbolt specs include comprehensive frame and upper body measurements for thousands of cars and trucks, offering collision repair shops a single, easy-to-use resource for accurate repairs. Thunderbolt specs include measurements for window and door openings, tailgates, hoods, engine compartments, trunks and rear hatches, body openings and body widths. Pre-release vehicle data is added continually and updated daily for those who order the online version. 

Get Info Now

Ultra-Guard LS Heavy Duty full synthetic gear lubricant

Product From BG Products, Inc.

The BG Ultra-Guard LS Heavy Duty synthetic gear lubricant is formulated for durability by providing improved seal conditioning, quieter operation and dependable protection, according to the company. 

Get Info Now

LaserLock Live Mapping System

Product From Chief Automotive Technologies

The Chief Automotive Technologies LaserLock Live Mapping System is the next evolution in computerized collision repair measuring. It includes a laser scanner with out-of-level measuring capabilities; 45 targets with a wide range of attachments; a lockable, portable workstation equipped with dual flat screen monitors and color printer; and exclusive Chief software. LaserLock measures up to 45 individual points on a vehicle simultaneously in real-time, so collision repair technicians can monitor dimensional changes as they occur during pulling. As a result, there is no need to recalibrate after every pull and the risk of putting additional damage into a vehicle is reduced. LaserLock’s out-of-level measuring capabilities make it a perfect choice for the estimating bay, where it can be used with a two-post lift to measure every vehicle, uncover hidden damage and write better estimates, resulting in improved cycle times.

Get Info Now