Spotline laser vehicle spotting guide

Spotline laser vehicle spotting guide

Spotline laser vehicle spotting guide Product Image

Rotary Lift's Spotline laser vehicle spotting guide can be used with the company's Shockwave-equipped and other brand lifts. Different brand lifts can be accomodated with a retrofit kit that makes the laser spotting guide compatible with most inground and surface lifts. Installed on the top of the lift or elsewhere above the work area, the laser projects a green line directly in the center of the bay. The technician simply centers the line on the vehicle hood and dash while pulling in for perfect positioning every time. 

Expand for more details on this Product

DriveMaster Driveline Lift, 5130

Product From OTC, Bosch Automotive Service Solutions

The OTC DriveMaster Driveline Lift, No. 5130, with a 1,000-lb capacity has a low profile of 6” and raises to 30”, enabling the handling of a wide variety of driveline components, from light duty to heavy duty. The included differential adapter makes the tool even more versatile, spreading the purchase cost among multiple uses. 

Get Info Now

Hoist Hanger

Product From Hoist Hanger

Hoist Hanger provides an accessory for automotive lifts that allows wheels to be placed on and removed from vehicles at the same level the technician works, preventing the need to bend down to pick up or place a vehicle. Each Hoist Hanger is an independent unit that is quickly and easily installed or removed. When the technician is allowed to hang the wheel off to the side, back strain is avoided entirely.The Hoist Hanger comes in several sizes and fits almost any two-post lift. Each unit folds "out of the way" against the lift arm when not in use.

Get Info Now

MW-200 Mobile Wheel Lift

Product From Rotary Lift

The Rotary Lift MW-200 Mobile Wheel Lift helps reduce the risk of employee injury while simultaneously increasing productivity. The air-operated lift provides 200 lbs of capacity at 100 psi, enough to lift a broad range of wheels and tires. The lift's design requires no batteries and it has a rise time of six seconds. The wheel lift rolls on four high-quality casters for easy maneuverability and features single-lever controls for quick operation. Once properly positioned within the lift, a tire or wheel can be rotated 360 degrees on three large rollers.

Get Info Now

Backsaver lift accessory

Product From Mohawk Lifts

The Mohawk Lifts Backsaver can be used on all Mohawk 10,000-lb to 18,000-lb two-post lifts. The tool allows technicians to hang tires from lift swing arms, saving them from having to bend down to lift heavy tires and preventing potential sick days or workers' compensation claims from back pain. It can be installed in 10 minutes. With a 100-lb capacity, the Backsaver can hold the heaviest passenger car and light truck tires. Heavy rubber coating on the Backsaver prevents damage to expensive wheels and rims. 

Get Info Now

LED Rack Lighting Kit

Product From Hunter Engineering Company

The LED Rack Lighting Kit by Hunter illuminates wheel alignment adjustment points for higher productivity in the alignment bay. It mounts higher on the runway surface for brighter and more focused illumination. The kit switches on and off automatically as the rack rises and lowers. They can be installed by a Hunter Service Representative during a new rack installation or at a future date as required.

Get Info Now

Fold & Go ramps

Product From Kar Lift Solutions by Omer

Kar Lift Solutions by Omer's Fold & Go ramps come as low angle retractable approach ramps that can be folded up. Heavy vehicles that come lower to the ground make access difficult when the lift is surface mounted. These low angle approach ramps for the KAR series Pantograph vertical platform lifts benefit from being strong yet light weight and can be easily retracted by the technician. They come in several different models capableof a maximum capacity between 44,000 lbs to 99,000 lbs. 

Get Info Now

Adjustable frame-contact adapters, Nos. T110564 and T100285

Product From Forward Lift

Forward Lift's adjustable frame-contact adapters, Nos. T110564 and T100285, provide fine adjustment capabilities to better reach manufacturer-recommended lifting points, including situations where the lift is installed on an uneven floor. The new accessory is compatible with the Forward Lift DP10A, DP10S and I10 two-post lifts and fits into any of the height extensions provided with those models. The adapter can be adjusted with a screw that has a range of 1.25". Perched atop the screw on the adapter comes a frame cradle pad designed to securely hold vehicles in place.

Get Info Now

Quick Cycle vehicle lift technology

Product From Challenger Lifts

Challenger Lifts' Quick Cycle technology has increased the rise and descent speed of their CL10V3 two post and EV1020 inground lifts. Quick Cycle lifts have reduced lifting time from 48 seconds to 27 seconds, equating to a 42 percent time savings and a lowering speed to a constant 17 seconds (approximately) regardless of the weight of the vehicle. Quick Cycle technology was engineered as a solution for the expanding need for quick service bays, and has proven to be a simple and inexpensive way to add express services to shops everywhere.

Get Info Now

EarthLift wireless mobile column lift No. 1082RRA

Product From Stertil-Koni USA

The Stertil-Koni  EARTHLIFT wireless mobile column heavy duty vehicle lift (No. 1082RRA) is the first hydraulic green mobile column lift in the industry, according to the company.  Its columns are made with components that are 98 percent recyclable and the Active Energy Retrieval System (AERS) allows operators to achieve 35 percent more lifting cycles at maximum lifting load. The on-screen display highlights the AERS system, enabling the operator to see savings in real-time.  EARTHLIFT also uses a closed hydraulic system that contains bio-degradable oil and the batteries are 100 percent recyclable.

Get Info Now

QD8 Series Qwik Draw Brake Machines

Product From Link New Tech

The Link New Tech QD8 Series Qwik Draw brake machines allow users to simply hook up the machine and it will shut off automatically without putting air into the lines. This air is safely measured because of the floating ball in the new fluid tank signaling the machine to shut off fluid flow, eliminating any air that could enter the brake lines, without shutting off the machine. When the service is complete, any excessive air from the system will be depleted. This service can be fully completed in less than 10 minutes. This machine has been redesigned to only have two valves and automatic self-adjustment for pressure. 

Get Info Now