GM Thermostat Wrench, No. 751

GM Thermostat Wrench, No. 751

GM Thermostat Wrench, No. 751 Product Image

Cal-Van Tools' GM Thermostat Wrench, No. 751, can work on GM 3.1 and 3.4L V6 engines. Thermostat replacement forces the technician to remove the thermostat housing. In these applications the bottom housing bolt is almost inaccessible without removing other parts, until now. The wrench with its unique shape and design allows users to remove and install the housings in a fraction of the time it currently takes. The wrench is a 13 mm, 12 point with special bends specifically for GM V6 thermostat housings.

Expand for more details on this Product

Coil-On-Plug Spark Tester, No. 20700

Product From Lisle Corporation

The Lisle Coil-On-Plug Spark Tester, No. 20700, provides an easy way to check ignition systems with coil-on plugs. This tool offers the quickest way to test for no-start conditions, according to the company. High-visibility white lettering makes it easy to read the gap measurement from 0 to 40k, the round knob provides easy gap adjustment and the 12" ground wire comes with a shielded clip. Applications include Ford, Chrysler, Mitsubishi, Nissan and more. The standard plug wire tip can be unscrewed so the tester can be used on small engines and some motorcycles.

Get Info Now

Door Latch Release Tool, No. 34920

Product From Lisle Corporation

The Lisle Door Latch Release Tool, No. 34920, is used to release the cable from the handle assembly so that a vehicle's door panel can be removed. This tool is designed to work on 2007-2013 Chevy and GMC pickups, Suburban, Tahoe, Avalanche and Yukon vehicles. This release tool weighs 2 oz. To use, release the panel from the vehicle door. Pull the panel away from the door and locate the handle assembly. Slip the tool end around the cable. Press the tool over the connector to compress tabs and release the connector from the housing. The cable end can then be removed from the handle pull. 

Get Info Now

FreeLock Door Lock Actuator Removal Tool

Product From AirSept Inc.

On the doors of many 1989-2005 Ford vans, trucks, and minivans, and 1989-1998 Thunderbird/Town Car/Cougar, the actuator that locks or releases the door is buried inside a sub-assembly. Removal and replacement of a defective door lock actuator requires a minimum of two hours labor, usually requiring complete disassembly of that door section. The

Get Info Now

Ford Spark Plug Removal Kit, No. 6918

Product From OTC, Bosch Automotive Service Solutions

The OTC Ford Spark Plug Removal Kit, No. 6918, helps eliminate plug breakage upon removal, speeding up the process of removing and replacing plugs for notoriously difficult-to-remove Ford three-valve engines that features a two-piece spark plug design. It locks the plug porcelain core to the protruding

Get Info Now

Diesel Filter Wrenches for Davco products, Nos. 61090, 61110 and 61130

Product From Lisle Corporation

The Lisle Corp. Diesel Filter Wrenches for Davco products, Nos. 61090, 61110 and 61130, are designed to remove and replace the main filter collar as well as the vent cap on aftermarket diesel fuel filter systems. The unique half-moon design provides easier access to the fuel filter, according to the company. High-strength steel prevents the wrench from flexing while loosening filter collars, four teeth grab the vent cap securely to prevent damage and a thick, padded grip cushions users hands. The 61090 wrench fits 5" Davco 242/243 aftermarket fuel filter systems, the 61110 fits 6" Davco 382 aftermarket fuel filter systems and the 61130 fits 8" Davco 482 aftermarket fuel filter systems. 

Get Info Now

Spline Ratcheting Wrench Set, No. NR5M

Product From E-Z Red Company

The 5-pc extra long flex head Spline Ratcheting Wrench Set, No. NR5M from E-Z Red has extra long spine with 180-degree flex heads. The tool meets and exceeds ASME/ANSI torque specifications. It comes packaged in the signature E-Z Red high density foam tray and has a  limited lifetime warranty. It includes sizes: 8mm x 10mm, 12mm x 14mm, 13mm x 15mm, 16mm x 18mm and 17mm x 19mm.

Get Info Now

Duramax Water In Fuel Sensor Wrench No. 13100

Product From SP Tools/Schley Products Inc.

When replacing the fuel filter on a 2001 to current GM Duramax light duty truck the water-in-fuel sensor located in the bottom of the filter must be removed and reused in the new filter. The SP Tools Duramax Water In Fuel Sensor Wrench

Get Info Now

Fuel Pressure Sensor Socket for GM Vehicles, No. A227

Product From Snap-on Inc.

The Snap-on Fuel Pressure Sensor Socket for GM Vehicles, No. A227,  is specifically designed to easily remove GM fuel pressure sensors. Access to these sensors is restricted by the sensor connector and side air intake ports, so technicians often attempt to remove the sensor with pliers, which can easily damage the part. This socket is thin-walled and deeply broached giving technicians the ability to fit the socket over the sensor connector for safe removal. The A227 provides accessibility to areas where a regular 27mm socket does not work. The Fuel Pressure Socket works on a number of 2007-2011 models, including the Cadillac CTS and STS; the Buick Allure, Enclave and LaCrosse; and the Chevrolet Camaro, Cobalt, HHR, Traverse and Acadia.

Get Info Now

Wheel Hub Grinder Type 1

Product From Mueller-Kueps LP

The Mueller Kueps Wheel Hub Grinder Type 1 includes a special grinder for cleaning the wheel centering device as well as the attachment area between wheel and hub. This tool allows technicians to completely remove burned-in corrosion residues in a quick and easy process. Actual process time per hub only takes about 3-25 seconds, depending on residue thickness.

Get Info Now

12-Point Metric Axle Nut Socket Set, No. 976

Product From Cal-Van Tools

The Cal-Van Tools 12-Point Metric Axle Nut Socket Set, No. 976, fits axle nuts and automatic transmission tail output shafts on Toyota, Lexus, Chrysler, Dodge, Jeep Audi, Volkswagen and BMW makes, and many more. The set comes with a blow molded case and includes socket sizes: 29mm, 30mm, 32mm, 34mm, 35mm, 36mm, 38mm and 39mm.

Get Info Now