Constant Pressure Tub Cutter, No 158

Constant Pressure Tub Cutter, No 158

Constant Pressure Tub Cutter, No 158 Product Image

Cal-Van Tools' Constant Pressure Tube Cutter, No. 158,  tilizes a spring to keep consistent compression on the cutting blade to the tube to  cut through thin walled steel tubing between 1/8" to 1 1/8" without having to continually tighten or readjust the cutter. Simply turn the adjustment handle until the alignment marks line up, then turn the cutter to until the tubing is cut. Makes the task of cutting through steel walled tubing faster and easier. This is a professional grade cutter that features a replaceable blade.

Expand for more details on this Product

Tubing Notcher, No. TN1000

Product From Trick Tools

The JMR Tubing Notcher, No. TN1000, from Trick Tools has a 2-1/2" O.D. capacity, which is a positive zero point for a centered notch, and is capable of notching in a 210-degree arc. Angle changes can be made effortlessly due to a thrust bearing at the pivot point and offset copes can be performed with ease. This design has been engineered to perform offset notches without the use of a shim kit. Users will loosen the two allen bolts on the bottom of the shaft housing, raise the housing to a desired height up to 1" and start notching.

Get Info Now

Ratcheting Tube Cutter, No. 331

Product From Beta Tools

The Beta Tools Ratcheting Tube Cutter, No. 331, comes as a ratcheting tube cutter that allows the user to cut tubing that is located in tight spaces. Traditional tube cutters require the user to spin the tool around the tubing which can be nearly impossible when other mechanicals are in the way. With the No. 331, the user simply opens the end to place the tubing inside the tool, and then tighten the thumbscrew and ratchet.

Get Info Now

Tube Bender, No. BQ406

Product From BrakeQuip LLC

BrakeQuip improved the design of the Tube Bender, No. BQ406, so that its handles hold together easier. This tool bends 3/16" and 1/4" inch metal tubing by hand on the vehicle or it can be placed into a vice for bending multiple tubes. The rollers provide a smooth action and allow you to make tight radius bends up to 180 degrees. The handles conveniently come apart to allow you easy access to the finished product.

Get Info Now

Tube Straightener, No. BQ1028

Product From BrakeQuip LLC

BrakeQuip's Tube Straightener, No. BQ1028, has specially designed rollers that reduce the risk of Ovality in the tube. The rollers come made of a hard plastic material which does not mark the tube which is important when working with stainless steel. It either mounts into a vice or bracket mounted and straightens coiled tubing from 3/16" to 1/2" metal tube (even stainless). The unit is fully adjustable and gives a professional result.  

Get Info Now

Adjustable Tube Bender, No. BQ613

Product From BrakeQuip LLC

BrakeQuip's Adjustable Tube Bender, No. BQ613, allow the user to produce a 1800 degree bend if needed. The user can do this by adjusting the channel to the tube size by turning the center locking knob and installing the tube under the metal arm into the correct channel, then guiding the tube around the channel to the required angle. The tool can bend all the following sizes of metal tubes: imperial sizes: 3/16", 1/4", 5/16" and 3/8" and metric sizes: 4.75mm, 6mm, 8mm and 10mm.  Saves the user the cost of buying multiple size metal tube benders.

Get Info Now

TS14316 Tubing Straightener and Bending Pliers

Product From S.U.R.& R. Auto Parts Inc.

Designed for use with both 1/4" and 3/16" lines, the S.U.R.&R. TS14316 Tubing Straightener and Bending Pliers can be used to straighten or bend numerous material types including alloy, steel, stainless 

Get Info Now

Model 3012 Bender

Product From Huth/Ben Pearson - Div. of Huth Equipment Inc.

The Huth/Ben Pearson Model 3012 Bender allows the technician to bend completely around the bending dies on the same centerline, creating smooth clean bends. The Model 3012 has more clearance than a typical press bender, allowing the user to create more designs. Ben Pearson-compatible round and square tooling can be used, as well as custom tooling. Bend round tubing from 3/4 to 3" in diameter. Can expand pipes up through 3 to 4".

Get Info Now

Plasma cutter, No. WK2500

Product From Campbell Hausfeld

Campbell Hausfeld's plasma cutter, No. WK2500, comes as a 120-volt input, 13-amp DC output with inverter technology to produce a lot of power from a 22 lb package. The tool features a professional torch with contact striking pilot arc for distortion-proof cutting of mild steel, stainless steel, aluminum, copper and brass. For safety it includes an error indicator light for faulty connections, thermal overload protection with automatic shut-off and a built-in regulator and gauge for in-bound compressed air.

Get Info Now

Constant Pressure Tube Cutter, No. 157

Product From Cal-Van Tools

The Cal-Van Tools Constant Pressure Tube Cutter, No. 157, utilizes a spring to keep consistent compression on the cutting blade to the tube. This allows the user to cut through thin-walled steel tubing without having to continually tighten or readjust the cutter. Users simply turn the adjustment handle until the alignment marks line up, then turn the cutter to until the tubing is cut. This tool makes the task of cutting through steel walled tubing faster and easier, and features a replaceable blade. Users can cut a range of tubing sizes from 3/16" to 7/8". 

Get Info Now

Portable Expander, No. 1674

Product From Huth/Ben Pearson - Div. of Huth Equipment Inc.

Huth's Portable Expander, No. 1674, allows the user to expand tube anywhere. Has its own wheeling cart and compatible with other Huth pipe expanding equipment. This 220V, 5 HP machine canexpand tubing from 3" up to 6" diameter and 3" deep, with a maximum of 49,000 lbs of expanding power. With the die package, No. H37047, pipes can be expanded from 1.5" to 6". The large tray allows the user to keep the tooling within reach. Includes an automatic, preset expanding system for quick expanding.

Get Info Now