Snap-on’s hybrid battery lift, No. YA785, makes it easier, faster and safer for service technicians to remove, install and move hybrid HV batteries. Designed specifically for the Toyota, Honda and Ford hybrids, the tool provides a safer alternative to manual lifting. Accommodates battery packs with a special harness to adapt to specific lift points, helping minimize potential damage to vehicle interior. The low-profile legs fit beneath the vehicle and within the inside of the rear tires so the lift can easily get within reach of the battery.
Hybrid battery lift, No. YA785
- Product From ARI-Hetra
ARI-Hetra's Engine Hoist, No. AH09756, places a large emphasis on safety with a 9,000 lb lifting capacity, which can handle most engine sizes. This maximum lifting capacity combined with its collapsible frame helps this tool exceed job performance standards and allow it to be easily stored away when unused. The hoist has a usable, effective and safe design, according to the company.
- Product From JET Tools North America
Full of features normally found only on larger lever hoists, the JET JLH Compact Lever Hoist includes a grade 100 load chain, cast steel safety latches and a dual pawl brake design. Corrosion-resistant, industrial-grade components and heat-treated load plates make this hoist designed for increased strength and rigidity in harsh working environments. The exclusive, five-gear drivetrain design increases the gear ratio and requires less force to lift or secure a load. This design allows JET to pull with the same force as longer-handled models, while maintaining the compact design. Constructed of durable, lighter weight aluminum housing, this hoist comes in a nylon carrying case for easy portability. With a full range of models in this series, the JLH Compact Lever Hoist series is available in 1/4-ton and 1/2-ton capacities with standard lifts of 5', 10' and 15'.
- Product From W-K Sales & Distribution
The W-K Sales and Distribution WK-7 Air Rolling Jack for four-post hoists is adaptable to all major four-post hoists, and ideal for brake, suspension, wheel alignment and all other vehicle service work.
- Product From Tapeswitch Corporation
Tapeswitch Corporation manufactures pressure sensitive electrical edges that stop a machines operation in key presence sensing conditions depending on the product selection. These products are used for safety, sensing and detection among many operations throughout the world. Improve shop safety with safety edges for lifts, toe activation for machinery, safety bumpers for vehicle detection, road switch mats for vehicle counting. Offer trapped key interlocks and non-contact interlocks for guarding of machining and equipment areas, power switching of machinery and access control.
- Product From Rotary Lift
The Rotary Lift Mobile Wheel Lift, No. MW-500, can remove and position any wheel or tire weighing up to 500 lbs, making it easier and more ergonomic for technicians to work on heavy duty trucks, buses and construction equipment. The air-powered lift comes with an air hose and features an additional air tool connection on the colum. A single lever is used to raise and lower the lift, which has a six-second raise time.
- Product From Mac Tools
The Mac Tools 2-in-1 Seat-Stool Combo, No. CRS350, is a multi-purpose seat with a 2-in-1 function built around a strong professional-grade reinforced steel frame. It is topped with an extra-thick cushion for comfort and a treaded steel plate for added traction while standing on top of the stool. The patent-pending rolling seat rolls smoothly around on top of five 3” oil-resistant, 360-degree rotating casters for easy mobility while keeping all tools at hand in the thick, plastic tool tray.
- Product From Matco Tools
Matco Tools offers a line of blower fans including the 1200 cfm Blower Fan (21200), the 300 cfm Blower Fan (20300) and the Heater Attachment for the 300 cfm Blower Fan (20300-HTR). The 21200 and the 20300 are for indoor and outdoor use with built-in overload protection and variable speed switches to control motor speeds between 950 and 1650 rpm. The 21200 weighs 15.9 lbs and has an 8.5' cord. The 20300 weighs 11.5 lbs and also features an 8.5' cord. The 20300-HTR clips securely onto the front of the 20300 to convert the blower into a heater.
- Product From Kar Lift Solutions by Omer
The Kar Lift Equilibrium, by Omer, is a true vertical platform pantograph lift. The Equilibrium is available in 12,000-lb, 16,000-lb and 18,000-lb capacities. The 25.5"-wide runways are available in 17’, 18’ and 20’ long. The Equilibrium lifts to 81.5” and with less floor obstruction then other scissor lifts, according to the company. Omer uses a patented volumetric control that maintains the coplanarity of the runways without any electronic sensors on the lift. The Equilibrium is available with the 9,000-lb capacity, integrated-runway, lifting tables or conventional jacking beams.
- Product From CanDo
The CanDo BAT Plus Battery Tester offers users a comfortable, ergonomic design and easy operation for accurate and efficient testing. It has an easy-to-read screen with graphic display of voltage readings and actual battery condition. This tester cam perform battery tests on or off the vehicle to many types of 12V batteries including SLI and AGM batteries. It also has the ability to perform grounding tests, cranking tests and alternator tests. The integrated thermal printer will print complete battery and system test reports and customizable company header and footer can be added. Multiple language support is also available.
- Product From Kiene Diesel Accessories, Inc.
The Kiene Diesel CC2066 DPF Adapter Kit is an adapter for the company's multi-functional Clutch Caddy. The CC2066 DPF kit includes a support tray, a matched set of ballistic nylon JackSacks and a 2” Load Hugger Safety Strap to secure the load. The adapter safely handles DPF units of all shapes and sizes. The Caddy now has 16 adapters, which makes this tool an extremely versatile lifting, holding and positioning, safety tool.