Straightwell tool system

Straightwell tool system

Straightwell tool system Product Image

Porter-Ferguson's straightwell tool system helps body repair techs repair damaged areas in a fraction of the time that conventional techniques would require. Designed primarily for wheel well, quarter panel and fender repair, this system includes pulling tools for both curved and flat in either single or double channel models. Works on curved wheel wells, flat and wide pulling surfaces. Tools can be tightened or loosened with a hammer to ensure conformity to the work area. In addition to wheelwells and quarter panels, it can also be used to pull minor damage on bumpers, headlight housings, or anywhere else there is a pinch weld. Made in the USA.

Expand for more details on this Product

Wheel Hub Grinder Type 1

Product From Mueller-Kueps LP

The Mueller Kueps Wheel Hub Grinder Type 1 includes a special grinder for cleaning the wheel centering device as well as the attachment area between wheel and hub. This tool allows technicians to completely remove burned-in corrosion residues in a quick and easy process. Actual process time per hub only takes about 3-25 seconds, depending on residue thickness.

Get Info Now

Tight Spot Kit, No. SM14T-KIT

Product From Porter-Ferguson/Lowell Corp.

The Porter-Ferguson Tight Spot Kit, No. SM14T-KIT includes an SM0014T Telescoping Mini Ram and an extension arm for inserting into and removing the ram from frame rails, motor mounts, door panels and many other remote or confined areas.The ram's height with the pistons fully retracted is 2-5/16". The height with the first stage extended is 3-5/16” and the max height with both stages extended is 4-5/16”. Max capacity is 4-ton (3.6t) for stage one and 1-ton (0.9t) for stage two. The Extension Arm is 24-5/8" long, 2" wide and weighs 1 lb. Along with supporting the ram, it protects the hydraulic hose from scraping and cutting.

Get Info Now

Reverse Pull Clamp No. 4215

Product From Mo-Clamp/Pull-It Corp.

The Mo-Clamp Reverse Pull Clamp, No. 4215, allows techs to grab on to a reverse-facing weld or piece of metal and pull it out, without worrying about whether the clamp will slip or slide. The bar has a 30 percent bend to allow for easier hook-up. The plate can also easily be flipped over to provide the reverse angle of pull. The plate’s holes are designed to allow the clamp head to swivel slightly, in either direction, to provide the user an opportunity to get the exact angle of pull that’s needed. Made in U.S.A.

Get Info Now

Portable Pull Kits

Product From Porter-Ferguson/Lowell Corp.

Portable Pull Kits from Porter-Ferguson make it easy for auto body repair operations to turn a 4-ton or 10-ton jack assembly into a multi-directional pulling assembly. There are two kits: the 4-ton PF0153 Speed Midget Pull Kit and the 10-ton Hydro-Chief Pull Kit. The 4-ton kit includes a cap, 1/4" x 6' chain, a chain pull collar and two Bite-Tite clamps. The 10-ton kit includes a collar, small chain attachment, 3/8" x 6' chain and two Bite-Tite Clamps. Either kit provides 2" of metal pull for every inch of ram travel and jacks can be located at any position on the chain.

Get Info Now

Two-Position Ratcheting Screwdriver with LEDs, No. 82788

Product From GearWrench/Apex Tool Group

Gearwrench's Two-Position Ratcheting Screwdriver with LEDs, No. 82788, has two LEDs that help illuminate a work area, making it easier to work in poorly lit spaces. It has a 45-tooth ratcheting mechanism with forward, reverse and locked positions to quickly tighten or loosen fasteners. The screwdriver features a stainless steel collar that magnetizes the bit tip to help hold fasteners on the tool, resulting in fewer dropped and lost fasteners. Users also benefit from 6-bit storage (Phillips #1, #2 and T15, T20, T25 and T127 included) in the handle.

Get Info Now

2013 Maintenance Reminder Reset Procedures, No. 13-450

Product From Autodata Publications Inc.

The 2013 Maintenance Reminder Reset Procedures, No. 13-450, from Autodata helps users to ensure that vehicles always leave the shop with the maintenance reminders reset. The manual covers domestic and imported vehicles from 2002 to 2013, and includes step-by-step instructions, vehicle specific illustrations and system operation notes. The convenient spiral bound format lays flat or folds in half for easy handling within the vehicle.

Get Info Now

Spark Plug Starter Set, No. 63100

Product From Lisle Corporation

The Lisle Spark Plug Starter Set, No. 63100, features a 9" flexible shaft that allows technicians to obtain the desired angle to accurately install most spark plugs, without cross threading. The 3/8" square drive socket includes a strong neodymium magnet to hold the spark plug in during installation and removal. The tool can also be used as a magnetic pickup tool with a weight capacity of 1.56 lbs. The set includes four spark plug sockets: 9/16", 5/8", 3/4" and 13/16". Made in the U.S.A.

Get Info Now

Soft Pull Strap

Product From Porter-Ferguson/Lowell Corp.

Unlike chains, Soft Pull Straps from Porter-Ferguson can handle a variety of pulling jobs without marring, galling or damaging the work surface. The straps come in 36" long and 60" long lengths and each come in a standard and heavy duty option. For comfortable handling and to protect hands from pinching and cutting, all P-F straps have a double wall cover of durable "Tuflex" material. The following pulllng capacities can be handled: 5,300 lbs for eye-to-eye standard, 10,600 lbs heavy duty;  4,300 lbs choker standard, 8,500 lbs heavy duty; and 10,600 lbs basket standard, 21,200 lbs heavy duty. Made in the USA.

Get Info Now

XL Pass-Thru Ratchet and Socket System

Product From GearWrench/Apex Tool Group

GearWrench's XL Pass-Thru Ratchet and Socket System eliminates the need for two sets of sockets. With 11 locking head positions and a head profile up to 50 percent thinner than conventional ratchet systems, it provides unprecedented access in tight automotive applications. The ratcheting box end requires as few as five-degrees of swing arc to move fasteners, which dramatically increases productivity. The XL Pass Thru System can lower overall costs because automotive technicians no longer need deep sockets. Additionally, these sockets work where even deep sockets won't, such as providing access to a nut halfway down a threaded rod. 

Get Info Now

Wide Capacity Tongue and Groove Pliers, No. 7412

Product From SK Hand Tool, LLC

The SK Hand Tool Wide Capacity Tongue and Groove Pliers, No. 7412, can be used on round objects like pipes, rods and hoses providing three points of contact for a more positive grip on the object than a traditional tongue and groove pliers. The wide capacity, ranging from 1/2"-4", eliminates the need to carry multiple tools to cover the full range of work surface sizes. The tool's angled narrow head design allows access into tighter spaces than other pliers. Other features of the pliers include a flush rivet design for access in tight work spaces and a textured cushion grip for positive hold. 

Get Info Now