7-Piece Thin-Wall Impact Socket Set

7-Piece Thin-Wall Impact Socket Set

7-Piece Thin-Wall Impact Socket Set Product Image

Ken-Tool's 7-Piece Thin-Wall Impact Socket Set can be used on delicate car and light truck wheels with minimal lug nut clearance. The set comes with seven 6-point sockets, color coded by size, and sheathed in a plastic sleeve which further protects wheel surfaces from damage. There are four standard socket sizes and three metric sizes, all with a 2-Year Limited Lifetime Warranty. The compact case provides convenient storage.

Expand for more details on this Product

Pro Non-Slip Impact Sockets

Product From Matco Tools

Matco Tools Pro Non-Slip Impact Sockets are constructed of chrome-molybdenum, and are specially heat-treated to provide continuous impact use. An enhanced 6-point contact design with socket teeth grip the flat sides of the fastener to drive a nut that is up to 70 percent rounded off. These sockets feature easy identification with high visibility laser and impression-stamped size markings. The unique non-slip design protects and works on 6-point, 

Get Info Now

Tire Service Hammer

Product From OTC, Bosch Automotive Service Solutions

The OTC Tire Service Hammer is designed with unique tire and wheel service features — a bead breaking wedge, a top hook and a sledge edge.The convex-shaped bead breaking wedge penetrates the tire bead effectively, and a top hook can be used as a wheel tipper. A sledge end features a hook to drag the tire into position. 

Get Info Now

Hydraulic Hub Grappler Kit, No. 6575-3

Product From OTC, Bosch Automotive Service Solutions

The OTC Hydraulic Hub Grappler Kit, No. 6575-3, combines OTC’s patented Hub Grappler with a hydraulic drive, speeding up wheel bearing and hub service. Quick adjust jaws eliminate the need for fasteners while removing wheel hubs, speeding up the process. Use of hydraulics versus a pneumatic impact wrench means pulling hubs in seconds rather than minutes, with a hydraulic pump actuating a 9-ton ram. 

Get Info Now

Brake Caliper Pin/Bolt Remover Set No. 7302

Product From OTC, Bosch Automotive Service Solutions

The OTC Brake Caliper Pin/Bolt Remover Set, No. 7302, quickly removes seized, frozen or troublesome brake caliper bolts without damage. The kit and design, exclusive to OTC, includes a striking version and air hammer adapter, allowing a technician to strike the pin without damage to surrounding vehicle components. 

Get Info Now

Pneumatic Brake Pin and Bushing Driver Kits, Nos. A1166 and A954

Product From Ajax Tool Works Inc.

The Ajax Tools Pneumatic Brake Pin and Bushing Driver Kits, Nos. A1166 and A954, are used to remove anchor pins and install bushings on trucks, trailers and buses between 16,000 and 30,000 lbs. These kits eliminate the need to heat seized pins and bushings during the removal process and reduce removal and installation time by 60 to 70 percent. The A166 is a .401 shake brake pin bushing driver set that consists of one A1114 and A1115, and the A954 is a .498 set that includes one A956 and A957.  The overall lengh of drivers is 10-1/4”.

Get Info Now

Fuel Pressure Sensor Socket for GM Vehicles, No. A227

Product From Snap-on Inc.

The Snap-on Fuel Pressure Sensor Socket for GM Vehicles, No. A227,  is specifically designed to easily remove GM fuel pressure sensors. Access to these sensors is restricted by the sensor connector and side air intake ports, so technicians often attempt to remove the sensor with pliers, which can easily damage the part. This socket is thin-walled and deeply broached giving technicians the ability to fit the socket over the sensor connector for safe removal. The A227 provides accessibility to areas where a regular 27mm socket does not work. The Fuel Pressure Socket works on a number of 2007-2011 models, including the Cadillac CTS and STS; the Buick Allure, Enclave and LaCrosse; and the Chevrolet Camaro, Cobalt, HHR, Traverse and Acadia.

Get Info Now

Emergency Parking Brake Tool No. BT20

Product From Snap-on Inc.

Service technicians can save an average of 20 minutes on brake jobs when using the Snap-on Emergency Parking Brake Tool, No. BT20, on rear parking brake springs found on  many  Toyota  vehicles. The  brake  shoes  need  to  be  removed  when  doing  a complete brake job and this can be a challenging task on model year 2000 through current Tacoma, Tundra,

Get Info Now

Wheel Hub Grinder Type 1

Product From Mueller-Kueps LP

The Mueller Kueps Wheel Hub Grinder Type 1 includes a special grinder for cleaning the wheel centering device as well as the attachment area between wheel and hub. This tool allows technicians to completely remove burned-in corrosion residues in a quick and easy process. Actual process time per hub only takes about 3-25 seconds, depending on residue thickness.

Get Info Now

Precision Torque Hand and Impact Sockets

Product From Mac Tools

The Mac Tools Precision Torque Hand and Impact Sockets won’t slip on fasteners rounded up to 85 percent, according to the company. The inner geometry of the six-point socket holds nuts and bolts even when they get rounded. Each hand socket is made of chrome vanadium steel and each impact socket is made of chromoly steel to hold up to a lifetime of use. All sets come with a clip rail system, which hold the sockets snug when not in use and allows the user to rotate the socket 360 degrees. This line includes chrome and impact sets featured in 1/4", 3/8" and 1/2" drives.

Get Info Now

1/2" Impact Gun, No. SX231P-2, and 3-pc Thin Wall Socket Set

Product From Sunex Tools

The Sunex 1/2“ Impact Gun, No. SX231P-2, offers a 2" anvil that is reinforced with a specialized hardened alloy, which tested to be superior over industry-leading competitors, according to the company. The twin hammer mechanism produces up to 500 ft/lbs of torque. The reverse-bias technology increases the torque in reverse mode to ensure the removal of lug nuts when using in conjunction with the

Get Info Now