MTA Trailer Suspension Series, Nos. MTA25 and MTA30

MTA Trailer Suspension Series, Nos. MTA25 and MTA30

MTA Trailer Suspension Series, Nos. MTA25 and MTA30 Product Image

Meritor's MTA25 low-mount and MTA30 low-mount trailer suspensions can optimize performance and weight and be used for vocational applications like single-drop flatbed, double-drop flatbed, loggers and chip hauler trailers. The top-mount MTA25 (25,000-pound capacity) and the top mount MTA30 (30,000-pound capacity) come available with the optional lift kit – a system that efficiently raises select axles, improving maneuverability and extending tire life. Available in painted or galvanized finishes, the lift kit attaches easily and can be installed as original equipment (OE) or field retrofitted. 

Expand for more details on this Product

Hydraulic Hub Grappler Kit, No. 6575-3

Product From OTC, Bosch Automotive Service Solutions

The OTC Hydraulic Hub Grappler Kit, No. 6575-3, combines OTC’s patented Hub Grappler with a hydraulic drive, speeding up wheel bearing and hub service. Quick adjust jaws eliminate the need for fasteners while removing wheel hubs, speeding up the process. Use of hydraulics versus a pneumatic impact wrench means pulling hubs in seconds rather than minutes, with a hydraulic pump actuating a 9-ton ram. 

Get Info Now

39 Piece Strut/Shock Installation Tool Kit, No. 78554

Product From JS Products, Inc. (Steelman)

The JS Products/Steelman PRO 39 Piece Strut/Shock Installation Tool Kit, No. 78554, is designed to save technicians time and money when dealing with shocks and struts. With this kit, damaging a shock or strut by breaking the seal on the shaft will not be an issue. Technicians can select the bit and the corresponding socket for the strut or shock. When used together with a combination wrench and ratchet with a socket, the removal and installation of shocks and struts is easy, says the company.

Get Info Now

S2G LPG Commercial Chassis

Product From Freightliner Trucks

The Freightliner S2G LPG Commercial Chassis is equipped with interlock wiring and body builder interface connections, eliminating the need for OEMs to splice into chassis wiring, and clean frame rails for easy body installation. The chassis also includes an 8.0L LPG engine rated at 325hp and 450 ft/lbs of torque, a 9,000-lb capacity taperleaf front suspension and a 12,500-lb capacity 52" variable-rate, multi-leaf spring rear suspension and a low-effort, easy-tilt hood with a dampening device to minimize rapid closure. This has a factory-installed fuel system, and the engine assembly and fuel system are certified for use up to 33,000-lb GVWR.

Get Info Now

Steerable Auxiliary Lift Axle Suspension System, No. RSS-233

Product From Ridewell Corporation

The Ridewell Steerable Auxiliary Lift Axle Suspension System, No. RSS-233, includes a compact mounting envelope and an easy-mount adjustable-hanger system. RSS-233 suspensions are manufactured with a dual-draw key kingpin design to extend kingpin life and fully-cast axle ends for increased strength and durability. Additional features include 7" to 18" ride heights, a 13,200-lb capacity, a pre-plumbed air tank option, polyurethane pivot bushings, 1'' and 2'' spacer kit options and control arms angled for lateral stability. The RSS-233 ships fully-assembled for efficient installation.

Get Info Now

Total Installation Kits

Product From Betts Spring Company

BettsHD's Total Installation Kits (TIK) for its most popular fenders works on several single axle, half and full tandem axle applications. The kit includes two fenders with vibration absorbing rubber insulators to prolong product life, along with all brackets and hardware necessary to complete installation. Unlike competitive offerings, all BettsHD fenders include mating material hardware designed to reduce corrosion. These popular kits are available in stainless steel, galvanized, aluminum and poly, all supported by a limited lifetime warranty. 

Get Info Now

SL-1187TT

Product From Watson & Chalin Mfg Inc

TRU-TRACK
SELF-STEERING AXLE & SUSPENSION SYSTEM

Tru-Track Series
5 Year Warranty
Maintenance Free with
Huck Fasteners
13,200 lb. Capacity


INTEGRATED SUSPENSION AND AXLE ASSEMBLY

  • Axle Travel: 13.5 in.
  • Axle Lift: 10.5 in.
Get Info Now

Hexforce 5-pc Wrap-Around Wrench Set No. HFK-2

Product From AGS Company

The AGS Company HFK-2 5-pc Hexforce Wrap-Around Wrench Set features a unique pivot/hinge/clamp action for 360-degree contact. This tool will not slip off, even the most damaged hex surface. With socket-like gripping on captive fittings, these tools attach to standard 1/2” or 3/8” ratchet drive. This set contains the following wrench sizes: 15/16" (23-24mm), 13/16"-7/8" (21-22mm), 3/4" (19-20mm), 11/16" (17-18mm) and 5/8" (16mm). Perfect for the professional installer working on chassis, suspension, alignment, front-end, air conditioning and tube nut applications.

Get Info Now

Easy-Fit suspension upgrade kit

Product From Roadmaster Active Suspension

Roadmaster Active Suspension introduces the ‘Easy-Fit’ rear leaf spring suspension upgrade kit. The new design can be installed in less than 30 minutes and enables a vehicle to carry maximum loads without sagging or bottoming out. RAS will significantly improve handling and stability, as well as save on fuel and reduce tire wear by reducing tire roll resistance. A 30-day money back satisfaction guarantee comes included.

Get Info Now

Upper Body Bar

Product From Chief Automotive Technologies

Chief Automotive's Upper Body Bar extends the reach of Velocity's laser measuring capabilities to cover the entire vehicle, including roof, trunk, strut towers and windows, and to facilitate steering and suspension realignment. It can simultaneously measure a vehicle's steering axis inclination on both sides as well as the vehicle's lower structure, live. It measures multiple points at the same time.

Get Info Now

Trailing-Arm Air Suspension

Product From ArvinMeritor

ArvinMeritor's Meritor Trailing-Arm Air (MTA) suspension series provides a softer ride for more cargo protection and reduced torsional stress on the vehicle's structure. Patented steel interleaf shims in the bushing provide improved fore-aft stiffness aiding in dynamic axle alignment, better tire wear, and controlled roll steer. Larger, more robust shock absorbers specifically tuned to Meritor suspensions provide greater suspension control and more consistent tire contact with the ground, reducing tire tread wear, improving braking and enhancing handling. Other design elements contribute to superior suspension durability.

Get Info Now