Ford Drive Line Impact Sockets

Ford Drive Line Impact Sockets

Ford Drive Line Impact Sockets Product Image

The Sunex Ford Drive Line Impact Socket is specifically designed for driveline applications on Ford Mustang, Crown Victoria, Taurus, Explorer, Expedition, Excursion, Ranger, F150 and Mercury equivalents from 1980s to present. Featuring a unique 12mm, 12 point universal design, this tool eliminates the need for the extensions and wobble sockets and is engineered to sit flush over the fastener to reduce wear on the fastener and socket wall. Comes with a lifetime warranty.

Expand for more details on this Product

Coil-On-Plug Spark Tester, No. 20700

Product From Lisle Corporation

The Lisle Coil-On-Plug Spark Tester, No. 20700, provides an easy way to check ignition systems with coil-on plugs. This tool offers the quickest way to test for no-start conditions, according to the company. High-visibility white lettering makes it easy to read the gap measurement from 0 to 40k, the round knob provides easy gap adjustment and the 12" ground wire comes with a shielded clip. Applications include Ford, Chrysler, Mitsubishi, Nissan and more. The standard plug wire tip can be unscrewed so the tester can be used on small engines and some motorcycles.

Get Info Now

Door Latch Release Tool, No. 34920

Product From Lisle Corporation

The Lisle Door Latch Release Tool, No. 34920, is used to release the cable from the handle assembly so that a vehicle's door panel can be removed. This tool is designed to work on 2007-2013 Chevy and GMC pickups, Suburban, Tahoe, Avalanche and Yukon vehicles. This release tool weighs 2 oz. To use, release the panel from the vehicle door. Pull the panel away from the door and locate the handle assembly. Slip the tool end around the cable. Press the tool over the connector to compress tabs and release the connector from the housing. The cable end can then be removed from the handle pull. 

Get Info Now

Pro Non-Slip Impact Sockets

Product From Matco Tools

Matco Tools Pro Non-Slip Impact Sockets are constructed of chrome-molybdenum, and are specially heat-treated to provide continuous impact use. An enhanced 6-point contact design with socket teeth grip the flat sides of the fastener to drive a nut that is up to 70 percent rounded off. These sockets feature easy identification with high visibility laser and impression-stamped size markings. The unique non-slip design protects and works on 6-point, 

Get Info Now

FreeLock Door Lock Actuator Removal Tool

Product From AirSept Inc.

On the doors of many 1989-2005 Ford vans, trucks, and minivans, and 1989-1998 Thunderbird/Town Car/Cougar, the actuator that locks or releases the door is buried inside a sub-assembly. Removal and replacement of a defective door lock actuator requires a minimum of two hours labor, usually requiring complete disassembly of that door section. The

Get Info Now

Ford Spark Plug Removal Kit, No. 6918

Product From OTC, Bosch Automotive Service Solutions

The OTC Ford Spark Plug Removal Kit, No. 6918, helps eliminate plug breakage upon removal, speeding up the process of removing and replacing plugs for notoriously difficult-to-remove Ford three-valve engines that features a two-piece spark plug design. It locks the plug porcelain core to the protruding

Get Info Now

Duramax Water In Fuel Sensor Wrench No. 13100

Product From SP Tools/Schley Products Inc.

When replacing the fuel filter on a 2001 to current GM Duramax light duty truck the water-in-fuel sensor located in the bottom of the filter must be removed and reused in the new filter. The SP Tools Duramax Water In Fuel Sensor Wrench

Get Info Now

Fuel Pressure Sensor Socket for GM Vehicles, No. A227

Product From Snap-on Inc.

The Snap-on Fuel Pressure Sensor Socket for GM Vehicles, No. A227,  is specifically designed to easily remove GM fuel pressure sensors. Access to these sensors is restricted by the sensor connector and side air intake ports, so technicians often attempt to remove the sensor with pliers, which can easily damage the part. This socket is thin-walled and deeply broached giving technicians the ability to fit the socket over the sensor connector for safe removal. The A227 provides accessibility to areas where a regular 27mm socket does not work. The Fuel Pressure Socket works on a number of 2007-2011 models, including the Cadillac CTS and STS; the Buick Allure, Enclave and LaCrosse; and the Chevrolet Camaro, Cobalt, HHR, Traverse and Acadia.

Get Info Now

Precision Torque Hand and Impact Sockets

Product From Mac Tools

The Mac Tools Precision Torque Hand and Impact Sockets won’t slip on fasteners rounded up to 85 percent, according to the company. The inner geometry of the six-point socket holds nuts and bolts even when they get rounded. Each hand socket is made of chrome vanadium steel and each impact socket is made of chromoly steel to hold up to a lifetime of use. All sets come with a clip rail system, which hold the sockets snug when not in use and allows the user to rotate the socket 360 degrees. This line includes chrome and impact sets featured in 1/4", 3/8" and 1/2" drives.

Get Info Now

12-Point Metric Axle Nut Socket Set, No. 976

Product From Cal-Van Tools

The Cal-Van Tools 12-Point Metric Axle Nut Socket Set, No. 976, fits axle nuts and automatic transmission tail output shafts on Toyota, Lexus, Chrysler, Dodge, Jeep Audi, Volkswagen and BMW makes, and many more. The set comes with a blow molded case and includes socket sizes: 29mm, 30mm, 32mm, 34mm, 35mm, 36mm, 38mm and 39mm.

Get Info Now

1/2" Impact Gun, No. SX231P-2, and 3-pc Thin Wall Socket Set

Product From Sunex Tools

The Sunex 1/2“ Impact Gun, No. SX231P-2, offers a 2" anvil that is reinforced with a specialized hardened alloy, which tested to be superior over industry-leading competitors, according to the company. The twin hammer mechanism produces up to 500 ft/lbs of torque. The reverse-bias technology increases the torque in reverse mode to ensure the removal of lug nuts when using in conjunction with the

Get Info Now