BTB WK10HD Auto Glass Removal Tool

BTB WK10HD Auto Glass Removal Tool

BTB WK10HD Auto Glass Removal Tool Product Image

The BTB WK10HD auto glass removal power tool is supplied in a range of industry tailored toolkits for safe removal of any adhesive bonded glass from any vehicle, domestic or imported, specializing in those challenging glasses such as deep dash windshields, back sliders (Toyota Hilux, Dodge Ram etc), exposed edge glasses (many VWs etc), and safe removal of unbroken encapsulated glasses (quarter glasses) for body shop and dismantler yard R&I's without damage to glass, encapsulation or paintwork. For collision repairers, this removal tool will also safely remove adhesive bonded body panels, bonded decorative body mouldings, badges, emblems and other components fixed with flexible adhesives such as urethane or double-sided tape.

Expand for more details on this Product

Coil-On-Plug Spark Tester, No. 20700

Product From Lisle Corporation

The Lisle Coil-On-Plug Spark Tester, No. 20700, provides an easy way to check ignition systems with coil-on plugs. This tool offers the quickest way to test for no-start conditions, according to the company. High-visibility white lettering makes it easy to read the gap measurement from 0 to 40k, the round knob provides easy gap adjustment and the 12" ground wire comes with a shielded clip. Applications include Ford, Chrysler, Mitsubishi, Nissan and more. The standard plug wire tip can be unscrewed so the tester can be used on small engines and some motorcycles.

Get Info Now

Wire Insertion Tool Set, No. 61030

Product From Lisle Corporation

The Lisle Wire Insertion Tool Set, No. 61030, includes the 1/4" O.D. and 3/8" O.D. wire insertion tools for installing or repairing audio equipment, aftermarket lighting, alarm systems and much more. With a sharp point on the end and palm-size handle, these tools provide extra leverage to pierce through firewalls, rubber grommets and panels. The 10-1/2" steel tube provides easy access to feed wires through the firewall. These tools are also available individually.

Get Info Now

Door Latch Release Tool, No. 34920

Product From Lisle Corporation

The Lisle Door Latch Release Tool, No. 34920, is used to release the cable from the handle assembly so that a vehicle's door panel can be removed. This tool is designed to work on 2007-2013 Chevy and GMC pickups, Suburban, Tahoe, Avalanche and Yukon vehicles. This release tool weighs 2 oz. To use, release the panel from the vehicle door. Pull the panel away from the door and locate the handle assembly. Slip the tool end around the cable. Press the tool over the connector to compress tabs and release the connector from the housing. The cable end can then be removed from the handle pull. 

Get Info Now

LT276 Self Locking Door Wedge

Product From Lock Technology, Inc. (LTI Tools)

Wedges today, especially plastic ones, have a tendency to slide out during use. The Lock Technology LT276 Self Locking Door Wedge has a wash board/wave ripple surface to it.  This allows easy entry between the door and rubber strip. The rippled wave-like surface securely locks the wedge in place making it almost impossible to slide out. This tool makes a g

Get Info Now

FreeLock Door Lock Actuator Removal Tool

Product From AirSept Inc.

On the doors of many 1989-2005 Ford vans, trucks, and minivans, and 1989-1998 Thunderbird/Town Car/Cougar, the actuator that locks or releases the door is buried inside a sub-assembly. Removal and replacement of a defective door lock actuator requires a minimum of two hours labor, usually requiring complete disassembly of that door section. The

Get Info Now

Ford Spark Plug Removal Kit, No. 6918

Product From OTC, Bosch Automotive Service Solutions

The OTC Ford Spark Plug Removal Kit, No. 6918, helps eliminate plug breakage upon removal, speeding up the process of removing and replacing plugs for notoriously difficult-to-remove Ford three-valve engines that features a two-piece spark plug design. It locks the plug porcelain core to the protruding

Get Info Now

Duramax Water In Fuel Sensor Wrench No. 13100

Product From SP Tools/Schley Products Inc.

When replacing the fuel filter on a 2001 to current GM Duramax light duty truck the water-in-fuel sensor located in the bottom of the filter must be removed and reused in the new filter. The SP Tools Duramax Water In Fuel Sensor Wrench

Get Info Now

Fuel Pressure Sensor Socket for GM Vehicles, No. A227

Product From Snap-on Inc.

The Snap-on Fuel Pressure Sensor Socket for GM Vehicles, No. A227,  is specifically designed to easily remove GM fuel pressure sensors. Access to these sensors is restricted by the sensor connector and side air intake ports, so technicians often attempt to remove the sensor with pliers, which can easily damage the part. This socket is thin-walled and deeply broached giving technicians the ability to fit the socket over the sensor connector for safe removal. The A227 provides accessibility to areas where a regular 27mm socket does not work. The Fuel Pressure Socket works on a number of 2007-2011 models, including the Cadillac CTS and STS; the Buick Allure, Enclave and LaCrosse; and the Chevrolet Camaro, Cobalt, HHR, Traverse and Acadia.

Get Info Now

Emergency Parking Brake Tool No. BT20

Product From Snap-on Inc.

Service technicians can save an average of 20 minutes on brake jobs when using the Snap-on Emergency Parking Brake Tool, No. BT20, on rear parking brake springs found on  many  Toyota  vehicles. The  brake  shoes  need  to  be  removed  when  doing  a complete brake job and this can be a challenging task on model year 2000 through current Tacoma, Tundra,

Get Info Now

Oil Funnel, No. SD1270H

Product From Mac Tools

The Mac Tools Oil funnel, No. SD1270H, is designed to fit most models of Honda vehicles. The SD1270H is threaded to screw onto the oil valve cover just like an oil cap, allowing the funnel to stay seated and sealed without leaking. With the funnel firmly attached, users can work hands-free with the oil bottles. The funnel stays upright to protect from fumes and spills. A clear stem allows users to watch for backups as baffles can slow down the oil flow. Made from durable ABS plastics, these funnels are designed for a long life in the shop.

Get Info Now