P125WJDU Utility Mount Air Compressor

P125WJDU Utility Mount Air Compressor

P125WJDU Utility Mount Air Compressor Product Image

Doosan Portable Power introduces the P125WJDU utility mount air compressor with convenient auxiliary drive option. The new utility mount P125WJDU air compressor offers impressive performance with a free-air delivery of 125 cfm and rated operating pressure of 100 psig. The P125WJDU is powered by a Tier 4i compliant John Deere 49 hp diesel engine for enhanced versatility, and includes a separate gear set on the air-end, allowing operators to use the auxiliary drive for hydraulics and other resources with the simple flip of a switch. The P125WJDU compressor design offers easy access to all major service points, a feature that helps streamline routine maintenance. The P125WJDU is equipped with full-sized, locking end doors that make for faster inspections of fluid levels, filters and battery access, and the unit’s fully removable side panels allow for easy access to all components.

Expand for more details on this Product

EnPak generator, air compressor and hydraulic pump

Product From Miller Electric

Miller Electric Mfg. Co. announced that its EnPak truck-integrated, engine-driven generator, air compressor and hydraulic pump now features a standard Auto Start/Stop functionality designed to further reduce fuel consumption, unnecessary EnPak engine idling, noise and emissions. EnPak monitors air and hydraulic loads and automatically shuts down once all loads have been idle for a pre-set time, and can sense air and hydraulic loads, restarting the engine when needed. Control pre-set times between two and 30 minutes. Auto Start/Stop further monitors the truck battery voltage and automatically starts EnPak’s engine when it senses that charging is required. This allows operation of 12V accessories such as LED lights and small inverters to be run with the EnPak off. 

Get Info Now

RAPTAIR-MF Multifunction Diesel Drive

Product From VMAC - Vehicle Mounted Air Compressors

The VMAC RAPTAIR-MF Multifunction Diesel Drive utilizes VMAC’s advanced compressor control system that is smart enough to turn the engine off when the user is not using air, and automatically turn the engine back on when the user use air again. This totally self-contained unit also provides an AC generator, welder, booster, battery charger and hydraulic capability through an integrated SAE 'A' PTO Port.  Providing the power and versatility of three expensive systems weighing over 1 ton, the RAPTAIR-MF combines them all in one compact, powerful package weighing less than 600 lbs.

Get Info Now

RAPTAIR60 Stand-Alone Diesel Drive Air Compressor

Product From VMAC - Vehicle Mounted Air Compressors

Created specifically for the mobile market, VMAC’s RAPTAIR60 stand-alone diesel drive air compressor system delivers true 60CFM at 100 psi. Utilizing VMAC’s Intelligent Digital Controls, the 100 percent duty cycle RAPTAIR60 turns itself on and off in response to air tool demand, contributing significantly to reduced idling and fuel costs, as well as a greener environmental profile. Measuring a compact 18” w by 34.5” l by 28” h and weighing 450 lbs, this system is significantly lighter than the nearest competitor offering. 

Get Info Now

RAPTAIR60 Stand-Alone Diesel Drive Air Compressor

Product From VMAC - Vehicle Mounted Air Compressors

VMAC offers the 60CFM RAPTAIR60 Stand-Alone Diesel Drive air compressor system. Created specifically for the mobile market, the system delivers a true 60CFM at 100 PSI and was designed to address concerns about noise, fuel consumption and emissions. Utilizing VMAC's Intelligent Digital Controls, the 100 percent duty cycle RAPTAIR60 turns itself on and off in response to air tool demand, contributing significantly to reduced idling and fuel costs as well as a greener environmental profile while still packing enough muscle to power up to a 60 lb jackhammer or a 1-1/4" impact wrench.

Get Info Now

Underhood Air Compressor

Product From VMAC - Vehicle Mounted Air Compressors

VMAC's Advanced Underhood70 air compressor system reduces fuel costs and comes with enhanced environmental features. Compact and powerful, it has a digital control system that communicates with the truck engine, allowing it to turn on and off as air is required, eliminating the need for extended idling times. A controller can limit engine speed on compressor start-up, read tank pressure and automatically adjust engine rpm as needed. The system produces 70 cfm and 175 psi. Other features include remote control plug-in capability, a heavy duty air filter with cyclone pre-filter and a USB port for collecting system diagnostic data.

Get Info Now

Lincoln Air Vantage Air Dryer/After Cooler for Kubota

Product From VMAC - Vehicle Mounted Air Compressors

Air tools require clean, dry air. Water vapor in the air will damage tools and freeze in cold weather. An after-cooler reduces the temperature of the compressed air and condenses the water vapor into liquid. Most of the water is extracted and collected in a drain bottle. The drain valve in the bottle has a small discharge of air which increases with system pressure to discharge water from the after cooler. The air then passes through an air dryer which removes any remaining water vapor. The water collects at the bottom of the air dryer which automatically expels the water with a small blast of air. Similar to the Cummins Air Vantage except for two additional brackets, a shorter discharge reservoir and a relocated general purpose filter designed to accommodate the much smaller welder envelope size.

Get Info Now

6.7" Light Cannon LED

Product From Vision X Lighting

The Vision X Lighting 6.7" Light Cannon LED shines at almost a half-mile of usable light from a single 50 watt luminous LED. The 10-degree spot pattern Light Cannon is also like having 12 lights in one. It enables optional snap-on polycarbonate cover filters to quickly change the beam pattern from Spot to Euro or Flood, while the colored filters (clear, blue, yellow or red) can improve visibility in various conditions. The universal single bolt mounting accompanied by an available wiring harness, provides a quick, traditional installation on a multitude of applications. The

Get Info Now

Custom-built water truck bodies

Product From McLellan Industries Inc

McLellan manufactures a full line of unique water truck bodies built for the construction, mining and agriculture industries. Each tank is rolled in one piece with only a single, longitudinal weld. This design reduces leakage over tanks welded together in sections, says the company. All McLellan tanks rest on a sub-frame designed for increased surface area, reducing the stress on key sections of the tank for an elongated lifespan. These tanks rest on shock-absorbing hold-down kits and a vulcanized rubber absorption pad system called PermaSlat mounting. These key design features extend the life of the tank from a few years to decades. Trucks range from 1,000 gallons to 5,600 gallons, and are available in multiple configurations best suited to a fleet's needs.

Get Info Now

Fully Customizable Lube Trucks

Product From McLellan Industries Inc

Utilize a full line of mobile, preventative maintenance vehicles designed to bring fuel, lubricants and maintenance equipment to the job site. The McLellan Industries fully customizable line of lube equipment

Get Info Now

523 Series Power Take-Off

Product From Chelsea Products Division, Parker Hannifin Corp.

The Chelsea 523 Series Power Take-Off, or P.T.O., is a two-gear designed rear mount P.T.O., which provides users with a compact housing that helps eliminate clearance issues. High-capacity bearings and superior gear designs provide users with torque ratings up to 260 ft/lbs (350 Nm). The 523 has 17 mounting adapters that will allow it to fit on 131 transmissions. It features four shift options, which are integrated into the P.T.O. housing for a space-saving design. The cam lock shift mechanism provides users with a positive engagement for each shift cycle. The 523 has two speed ratios available to meet application requirements. The four direct mount pump flange options come standard with the wet s

Get Info Now