Telescopic Magnifying Glass No. MG-2LT

Telescopic Magnifying Glass No. MG-2LT

Telescopic Magnifying Glass No. MG-2LT Product Image

The Ullman LED MG-2LT is a telescopic magnifying glass contains two high-intensity LEDs that make this tool ideal for reading small print, parts or serial numbers in dark, hard-to-reach areas. This tool has a 2" viewing diameter, with a 4x magnifying strength. With its 37-1/2" telescopic reach, it is sure to become a mechanics favorite tool for identification or inspection.

 

Expand for more details on this Product

Wheel Hub Grinder Type 1

Product From Mueller-Kueps LP

The Mueller Kueps Wheel Hub Grinder Type 1 includes a special grinder for cleaning the wheel centering device as well as the attachment area between wheel and hub. This tool allows technicians to completely remove burned-in corrosion residues in a quick and easy process. Actual process time per hub only takes about 3-25 seconds, depending on residue thickness.

Get Info Now

General Tool Inspection Mirror, No. 80560

Product From General Tools & Instruments

General Tools & Instrument's Telescoping Lighted Inspection Mirror, No. 80560, incorporates a 2" by 3", fully-polished and shatter-resistant glass mirror topped with two extra-bright LED bulbs. This tool is designed for seeing the “unseeable”, such as electrical wiring under dashboards. It is ergonomically designed with an 8" handle and a stainless steel telescoping shaft that extends from 12" to 33" and features a 360-degree swivel, double-ball joint for maneuvering in tight spaces.

Get Info Now

HTK-2 Telescopic Rectangular Inspection Mirror

Product From Ullman Devices Corp.

The Ullman HTK-2 Telescopic Rectangular Inspection Mirror features a swivel-free antenna and a 2-9/16” by 3-3/4” rectangular head. The HTK-2 includes a quick-release tab at the top of the head to easily replace the mirror. An all-angle ball joint holds the mirror head firmly at any angle. The stainless steel handle is long, strong and lightweight and provides users the ability to adjust from 6-3/4” to 29-3/4”. The heavy duty grip will not slip in wet or oily hands.

Get Info Now

Two-Position Ratcheting Screwdriver with LEDs, No. 82788

Product From GearWrench/Apex Tool Group

Gearwrench's Two-Position Ratcheting Screwdriver with LEDs, No. 82788, has two LEDs that help illuminate a work area, making it easier to work in poorly lit spaces. It has a 45-tooth ratcheting mechanism with forward, reverse and locked positions to quickly tighten or loosen fasteners. The screwdriver features a stainless steel collar that magnetizes the bit tip to help hold fasteners on the tool, resulting in fewer dropped and lost fasteners. Users also benefit from 6-bit storage (Phillips #1, #2 and T15, T20, T25 and T127 included) in the handle.

Get Info Now

2013 Maintenance Reminder Reset Procedures, No. 13-450

Product From Autodata Publications Inc.

The 2013 Maintenance Reminder Reset Procedures, No. 13-450, from Autodata helps users to ensure that vehicles always leave the shop with the maintenance reminders reset. The manual covers domestic and imported vehicles from 2002 to 2013, and includes step-by-step instructions, vehicle specific illustrations and system operation notes. The convenient spiral bound format lays flat or folds in half for easy handling within the vehicle.

Get Info Now

Spark Plug Starter Set, No. 63100

Product From Lisle Corporation

The Lisle Spark Plug Starter Set, No. 63100, features a 9" flexible shaft that allows technicians to obtain the desired angle to accurately install most spark plugs, without cross threading. The 3/8" square drive socket includes a strong neodymium magnet to hold the spark plug in during installation and removal. The tool can also be used as a magnetic pickup tool with a weight capacity of 1.56 lbs. The set includes four spark plug sockets: 9/16", 5/8", 3/4" and 13/16". Made in the U.S.A.

Get Info Now

XL Pass-Thru Ratchet and Socket System

Product From GearWrench/Apex Tool Group

GearWrench's XL Pass-Thru Ratchet and Socket System eliminates the need for two sets of sockets. With 11 locking head positions and a head profile up to 50 percent thinner than conventional ratchet systems, it provides unprecedented access in tight automotive applications. The ratcheting box end requires as few as five-degrees of swing arc to move fasteners, which dramatically increases productivity. The XL Pass Thru System can lower overall costs because automotive technicians no longer need deep sockets. Additionally, these sockets work where even deep sockets won't, such as providing access to a nut halfway down a threaded rod. 

Get Info Now

Wide Capacity Tongue and Groove Pliers, No. 7412

Product From SK Hand Tool, LLC

The SK Hand Tool Wide Capacity Tongue and Groove Pliers, No. 7412, can be used on round objects like pipes, rods and hoses providing three points of contact for a more positive grip on the object than a traditional tongue and groove pliers. The wide capacity, ranging from 1/2"-4", eliminates the need to carry multiple tools to cover the full range of work surface sizes. The tool's angled narrow head design allows access into tighter spaces than other pliers. Other features of the pliers include a flush rivet design for access in tight work spaces and a textured cushion grip for positive hold. 

Get Info Now

Tradesman Vise, No. 1755

Product From Wilton Tool Group

Made in the U.S.A., the Wilton Tool Group Tradesman Vise, No. 1755, has a 5-1/2" jaw width, 5" jaw opening and 3-3/4" throat depth. This means that it can handle the most demanding clamping applications. Unlike most vises that have a fixed center nut, this one has a round channel vise nut anchored at the rear. This rear anchored nut provides straight line pull and even pressure resulting in greater durability. The round channel design also allows for a completely enclosed spindle and nut assembly. This enclosure keeps debris out and lubrication in for a lifetime of smooth operation.

Get Info Now

8" Cable Shear

Product From KNIPEX Tools LP

The Knipex 8" Cable Shear, with a twin cutting edge, can cut through copper and aluminum cables.  This tool features precision ground, hardened blades that can accomplish a clean and smooth cut without crushing and deformation. The user does not need to exert as much effort, because the tool features a favorable lever ratio and optimized cutting-edge geometry. It has a guard that prevents pinching the user's finger and its twin cutting edge allows a comfortable handle position in all cutting situations within its specified cutting capacity.

Get Info Now