Coolview Discs

Coolview Discs

Coolview Discs Product Image

The Coolview Disc, from JOOL Tool, provides the angle grinder with more precision and control by allowing users to see through the spinning disc to watch the actual progress of the work as it is happening. A series of curved and straight slots are formed into the disc, extending all the way to the disc edge to provide a clear, glare-free view of the primary area where most work is done. The backside of the Coolview disc is fitted with a series of fins producing a steady flow of air that keeps the work surface up to 50 percent cooler.

 

Expand for more details on this Product

Wire Insertion Tool Set, No. 61030

Product From Lisle Corporation

The Lisle Wire Insertion Tool Set, No. 61030, includes the 1/4" O.D. and 3/8" O.D. wire insertion tools for installing or repairing audio equipment, aftermarket lighting, alarm systems and much more. With a sharp point on the end and palm-size handle, these tools provide extra leverage to pierce through firewalls, rubber grommets and panels. The 10-1/2" steel tube provides easy access to feed wires through the firewall. These tools are also available individually.

Get Info Now

Door Latch Release Tool, No. 34920

Product From Lisle Corporation

The Lisle Door Latch Release Tool, No. 34920, is used to release the cable from the handle assembly so that a vehicle's door panel can be removed. This tool is designed to work on 2007-2013 Chevy and GMC pickups, Suburban, Tahoe, Avalanche and Yukon vehicles. This release tool weighs 2 oz. To use, release the panel from the vehicle door. Pull the panel away from the door and locate the handle assembly. Slip the tool end around the cable. Press the tool over the connector to compress tabs and release the connector from the housing. The cable end can then be removed from the handle pull. 

Get Info Now

LT276 Self Locking Door Wedge

Product From Lock Technology, Inc. (LTI Tools)

Wedges today, especially plastic ones, have a tendency to slide out during use. The Lock Technology LT276 Self Locking Door Wedge has a wash board/wave ripple surface to it.  This allows easy entry between the door and rubber strip. The rippled wave-like surface securely locks the wedge in place making it almost impossible to slide out. This tool makes a g

Get Info Now

FreeLock Door Lock Actuator Removal Tool

Product From AirSept Inc.

On the doors of many 1989-2005 Ford vans, trucks, and minivans, and 1989-1998 Thunderbird/Town Car/Cougar, the actuator that locks or releases the door is buried inside a sub-assembly. Removal and replacement of a defective door lock actuator requires a minimum of two hours labor, usually requiring complete disassembly of that door section. The

Get Info Now

Tight Spot Kit, No. SM14T-KIT

Product From Porter-Ferguson/Lowell Corp.

The Porter-Ferguson Tight Spot Kit, No. SM14T-KIT includes an SM0014T Telescoping Mini Ram and an extension arm for inserting into and removing the ram from frame rails, motor mounts, door panels and many other remote or confined areas.The ram's height with the pistons fully retracted is 2-5/16". The height with the first stage extended is 3-5/16” and the max height with both stages extended is 4-5/16”. Max capacity is 4-ton (3.6t) for stage one and 1-ton (0.9t) for stage two. The Extension Arm is 24-5/8" long, 2" wide and weighs 1 lb. Along with supporting the ram, it protects the hydraulic hose from scraping and cutting.

Get Info Now

Perfect Gap Gauge No. DF-PG213

Product From Dent Fix Equipment

The Dent Fix DF-PG213 Perfect Gap Gauge removes the guesswork from setting the accurate gap width when aligning body panels and hoods, allowing the technician to set the width to the factory specifications. The felt covered magnets provide a solid mounting point on steel panels and the reverse side has a suction cup for aluminum and plastic panels. After adjusting the horizontal bar, the appropriate number of gauge tabs can be positioned in between the gap. The gauge has 10 alternating black and white tabs, each tab is 1mm thick with a maximum gauge depth of 10mm. This tool works well for hood, trunk, and door alignment or panel replacement and fitment. 

Get Info Now

Hook & Loop Block Set No. AF44HL

Product From Dura-Block

Using the hook and loop system, the Dura-Block AF44HL Hook & Loop Block Set? allows users to reuse paper repeatedly instead of wasting it when removed. The kit includes many of the most popular blocks:

Get Info Now

Mini-Ductor II+ handheld flameless torch

Product From Induction Innovations

The Induction Innovations Mini-Ductor II+ handheld flameless torch features a redesigned 230V international version of the Mini-Ductor II, with increased energy efficiency and ease of use. Leverage the power of technology with invisible heat to quickly release corroded or frozen hardware and other metallic components from corrosion and thread lock compounds, without the collateral damage associated with torches. The updated version features a cool-touch handle, and updated internal technology. The in-line design provides effective access for difficult-to-reach spots. Other features include an ergonomic, balanced design to reduce fatigue, a non-slip grenade handle, military-grade virgin plastic and an LED

Get Info Now

Inductor PDR Baton, No. U-111

Product From Induction Innovations

The updated Induction Innovations PDR (paintless dent repair) baton attachment, No. U-111, to complement its line of high performance induction heating tools. This product employs an 'invisible heat' method, offering a clean and fast way to fix hail dents, door dings and other minor soft dents. There is no need to meticulously massage out from the backside of vehicle panels, especially in hard-to-reach areas.  The ergonomically designed Inductor PDR Baton is molded in high-temp / impact-r

Get Info Now

Reverse Pull Clamp No. 4215

Product From Mo-Clamp/Pull-It Corp.

The Mo-Clamp Reverse Pull Clamp, No. 4215, allows techs to grab on to a reverse-facing weld or piece of metal and pull it out, without worrying about whether the clamp will slip or slide. The bar has a 30 percent bend to allow for easier hook-up. The plate can also easily be flipped over to provide the reverse angle of pull. The plate’s holes are designed to allow the clamp head to swivel slightly, in either direction, to provide the user an opportunity to get the exact angle of pull that’s needed. Made in U.S.A.

Get Info Now