VaporVue Vapor Charging Device

Sept. 22, 2011

Uniweld Products introduces the VaporVue Vapor Charging Device that absorbs heat naturally and flashes the liquid refrigerant from the cylinder, charging into the system as a vapor. Connecting the VaporVue to the low side of a charging manifold will increase the charging rate. The liquid is controlled by adjusting the manifold valve and monitoring the vapor rate through the double-sight glass. The VaporVue is factory pressure-tested at 8,900 psi and can be used to charge any system using R410a, CFC, HCFC and HFC, Zeotropic and Azeotropic refrigerants, without danger of liquid slugging and destroying the compressor. 

Request More Information

By clicking above, I acknowledge and agree to Endeavor Business Media’s Terms of Service and to Endeavor Business Media's use of my contact information to communicate with me about offerings by Endeavor, its brands, affiliates and/or third-party partners, consistent with Endeavor's Privacy Policy. In addition, I understand that my personal information will be shared with any sponsor(s) of the resource, so they can contact me directly about their products or services. Please refer to the privacy policies of such sponsor(s) for more details on how your information will be used by them. You may unsubscribe at any time.